Connect with us

Published

on

One of the options Starlink customers have been waiting on, for quite a while, is the ability to use Starlink terminals while in motion. With Starlink Maritime the company released the ability to use the high-speed internet while in motion out at sea, but at last, there is an official option for customers who want to mount a Starlink terminal on top of their RV or other vehicles for in-motion use.

This capability has a very high up-front cost, however. While the service is available for $135 per month in the US, as part of the Starlink for RV tier, the up-front cost for hardware is $2,500 rather than the $599 of a typical Starlink user terminal. That isn’t for no reason though. This terminal is one of the company’s high-performance terminals, which is much larger for a better connection with satellites. Unlike the pole mounted Starlink terminals, which use a motor to do some alignment and then the fine control of the phased-array antenna, the Flat High Performance terminal has no motor or pole mount, and uses exclusively the phased-array antenna.

SpaceX says this terminal’s “enhanced GPS capability” and wide field of view allow it to connect with more satellites to create a stable connection while in motion. As it’s designed for use in motion, the flat high-performance Starlink terminal also includes a mount for the power supply and router to help keep them in place.

According to their specs, the terminal can survive winds over 174mph. I think the word “survivable” should be examined with a bit of scrutiny – just cause the terminal can survive it doesn’t necessarily mean you can expect a reliable connection at that speed (not that you’ll be mounting the terminal on an F1 car to test it).

Being the high-performance terminal, it also has improved extreme weather capabilities for melting snow and withstanding heat.

Flat higher performance Starlink terminal. Credit: SpaceX

This service could be perfect for both RVers and truckers. Even if they don’t need the internet while actually on-the-move, the flat mount would allow them to have high-speed internet whenever they stop, rather than having to unpack a Starlink terminal, find a spot to set it, wire it, and wait for a connection.

While the terminal is costly, I have no doubt that many people will find it a good fit for them and purchase the package. Well before this flat high-performance terminal was released, however, users were modifying their own terminals for a similar experience.

As SpaceX continues to branch out its Starlink products, I believe it’s only a matter until they integrate Starlink data connectivity directly into Tesla vehicles. Tesla and SpaceX have had their cross-promotions plenty of times before. SpaceX launched a Tesla Roadster into space, SpaceX uses Tesla batteries in Starship to actuate flaps, Tesla referral program participants had their photos launched into space, and a limited form of Starlink connectivity will make its way to Tesla vehicles in the coming years. Initially, that will only be the same cell-phone-like connection that the V2 Starlink satellites will bring to any 5G phone. That connection is primarily for emergency calls and texts when outside of cellular connection. But as SpaceX continues to bring the cost down on the terminals, I believe there will eventually be a point that the increased cost of installing a terminal in Tesla vehicles from the factory will be outweighed by the benefits of the new Starlink customers it will attract.

People have even created businesses out of modifying Starlink terminals – such as Star-Mount systems. They offer a mounting kit so you can rehouse your own Starlink terminal into a flat mount. Depending on the mount type, you can either keep the terminal in mostly one piece, or cut apart the shell of the standard rectangular terminal and remove the motor and tube for an extremely thin terminal that can be installed on vehicles in a safe manner. Some of these mounts have suction cups at the four corners to allow them to suction onto even the glass-roofs of Tesla vehicles. Some people, of course, did this for their own use, but when Hurricane Ian struck Florida, Brandon Walsh of Star-Mount Systems stepped up and helped the state Hurricane Response and Relief unit to get their terminals modified for more convenient connectivity when responding to the disaster.

This is far from the first time that Starlink has been used in response to disasters, but the community effort behind the support here is worth note and worth celebrating.

There are even some great thoughtful additions to the terminal like an internal Apple AirTag to help keep track to the units in the even one could be stolen.

Even though there is now an official product from SpaceX that offers similar functionality, I’m confident some of the alternative options will have their place. Even with the cost of a standard Starlink terminal and a third party mounting solution, you’ve spent less than half as much as the low-profile higher performance terminal. The standard terminal also draws less power than the high-performance terminal, which is an important consideration for people living off-the-grid. There are certainly trade-offs either way, but I find the ingenuity of some people incredible.

Continue Reading

Environment

Autonomous electric semi truck brand Einride hits $1 billion valuation

Published

on

By

Autonomous electric semi truck brand Einride hits  billion valuation

Part self-driving tech brand, part 3PL, Swedish trucking startup Einride AB has been making a name for itself in the US and abroad by delivering zero-emission freight solutions that work. Following the company’s latest $100 million funding round, it’s delivering something else, too: a billion dollar valuation.

Bloomberg is reporting that Einride AB has closed a $100 million funding round at more than double the 400 million euro valuation (~$470 million) in its last 2021 funding round.

The source of that information, according to initial reports, spoke on the condition of anonymity but seems credible enough for the article to show up on Transport Topics. Einride, meanwhile, declined to comment on the dollar amounts, but did release a statement stating that the latest raise featured a mix of existing and new investors, including EQT Ventures, an unidentified global asset management company based on the American west coast, and IonQ, Inc.

“The capital will power Einride’s next phase of growth as it scales the deployment of its autonomous freight solutions, deepens technology development, and continues its expansion with customers,” said the company’s statement. “(After) a year of sustained growth for Einride with net sales more than doubling in 2024, a successful expansion into Austria and the UAE, and a growing footprint with global shippers across Europe and North America.”

Advertisement – scroll for more content

The move follows Einride CEO Robert Falck’s moves this past summer seemingly intended to prepare the company for a listing on a US stock exchange. The company generated $47 million in transport revenue last year with a mix of its own autonomous container trucks and a fleet of more than 150 battery-electric Peterbilt electric semi trucks, and has started cutting costs to become more efficient ahead of a listing.

The company received approval to begin operating its Level 4 autonomous heavy-duty electric vehicles on public European roads just last month.

Electrek’s Take


Autonomous Einride in NYC; via Einride AB.

While others promise big moves in the electric and self-driving semi truck space, Einride is quietly out there getting the job done, decarbonizing freight operations today with a smarter, safer, and smaller solution to the 18-wheeler.

Watch this space.

SOURCE | IMAGES: Einride, via Bloomberg.


If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them. 

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

You can get antique plates for a first-gen Prius now — feeling old, yet?

Published

on

By

You can get antique plates for a first-gen Prius now — feeling old, yet?

This fall marks the 25th anniversary of the US launch of the first-gen Toyota Prius — a car that, arguably, has done more to more to shift the market away from fossil fuels than any other single vehicle (more on that in a minute). That means that, in many states, you can now get “antique” or “historic” plates for a modern hybrid.

If that sounds appealing to you, here’s what it might cost to keep that OG Prius on the road for many more years to come.

“When the Prius burst into the US market, it was nothing short of a revolution,” reads the breathless Toyota PR copy. “A true trailblazer in the world of hybrid vehicles, (Prius) set the stage for the electrification movement, captivating environmentally conscious drivers with its innovative spirit.”

I think that’s true. And, as for that claim in the header that the Prius did more to shift the US auto market away from fossil fuels than any other single vehicle, ask yourself this: would there even be a Tesla Roadster (much less an “affordable” Model Y) without the Toyota Prius bringing the conversation about electric cars into the mainstream zeitgeist fully eight years earlier?

Advertisement – scroll for more content

I spent enough time behind the wheel of a seriously quick and capable US Electricar Consulier to tell you this much: no, there wouldn’t.

They’re still out there


2001 Prius, via Toyota.

The inspiration for this article was, predictably enough, a first-generation Prius sighting in my own neighborhood. One of more than 52,000 first-generation Priuses (Prii?) sold in the US, this one was green, with a straight body, glossy paint, and the woman driving it turned out to be the car’s original owner. Her Prius – Toyota’s first gas-electric hybrid – continued to give her great service from its 1.5-liter four-cylinder ICE and high-torque electric motor, and the car’s nickel-metal hydride battery pack seemed serviceable enough, though she couldn’t tell me if it was original (her husband took care of all that).

That, along with the possibility of trolling boomers with an antique-plated Prius, led me to ask myself, “What would it really take to keep one of these on the road?”

Even if your Prius spent its entire life in a garage and has only 60,000 miles on the clock, 25 years is still twenty-five years, and rubber doesn’t care about mileage. That’s not just the rubber in the tires, either. The factory struts, bushings, CV joints, belts – even the engine mounts will surely need to be replaced. Ditto for the door and window seals.

Along with a 12V battery, fresh oil and filter change, and a thorough cleaning, that’s the kind of stuff you should budget for on day one. Here’s a quick estimate on what that would run (parts only, of course, because you work on antiques yourself):

  • tires – Michelin Energy Saver A/S or Bridgestone Ecopia EP422 Plus in 195/65R15, plan on spending about $150/tire
  • shocks and struts – KYB Excel-G, commonly sold in pairs, expect to pay about $200/ea.
  • control arm bushings and sway bar links – MOOG control arm bushings and sway bar end links, $25-50/link
  • engine and transmission mounts – Dorman or Westar makes replacements at roughly $60–120 each, depending on which mount(s) you need
  • CV boots / axle rebuild kits – GSP or SKF kits typically sell $25–75/boot
  • Serpentine / accessory belt – Gates makes an OE-quality replacement belt for about $40

This is the big one


Under the hood; via Toyota.

You’ll notice, by now, that I’ve avoiding one particular bill. The one repair item that makes anyone looking at an older EV or hybrid think twice – the high-voltage battery. And, if you’ve done any kind of research into the cost of replacement batteries for older electric cars, you already know why that is. I haven’t mentioned it, because it’s not that bad.

I found a new high-voltage replacement battery for a Prius from GreenTec on sale for just $2,050 with a 36-month warranty, or $1,399 for a refurbished unit with a 12-month warranty. That’s not only significantly less than the price of a refurbished transmission for a Toyota Corolla of a similar vintage – it’s probably a lot less than people who still think EVs are new technology would have guessed, too.

Battery costs are going down


2024 Tesla Prices
2024 Model S; via Tesla.

The costs of replacing a high-voltage EV battery in older model year cars continues to go down – and that’s true for newer EVs, too. “We’ve seen about $12-18K as an average replacement cost for a Tesla battery,” says KJ Gimbel, founder and CEO of extended EV warranty firm, Xcelerate Auto. “(At that number) we’re confident that we’ll be able to support the vast majority of claims that arise, regardless of the model.”

In other words, if you’re the type of gear head who expresses a midlife crisis by buying a sensible, reliable daily driver, you could do a lot worse than a historic Prius.

That’s my take, anyway – what’s yours? Let us know what you think of the Prius’ 25th American birthday, its role in the EV revolution, and whether or not it’ll ever gain true classic status in the comments section at the bottom of the page.

Original content from Electrek.


If you drive an electric vehicle, make charging at home fast, safe, and convenient with a Level 2 charger installed by Qmerit. As the nation’s most trusted EV charger installation network, Qmerit connects you with licensed, background-checked electricians who specialize in EV charging. You’ll get a quick online estimate, upfront pricing, and installation backed by Qmerit’s nationwide quality guarantee. Their pros follow the highest safety standards so you can plug in at home with total peace of mind.

Ready to charge smarter? Get started today with Qmerit.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

What messy middle? Orange EV has logged over 10 MILLION all-electric hours!

Published

on

By

What messy middle? Orange EV has logged over 10 MILLION all-electric hours!

Orange EV may not be a household name like Mack or Kenworth, but this small-ish maker of all-electric heavy duty terminal tractors is making a name for itself where it matters: on the job. And this week, the company’s deployed fleet logged its ten millionth hour of operation!

Despite claims from oil-backed “efficiency” groups and fossil-backed hydrogen propaganda to the contrary, battery-powered heavy-duty EVs are proving themselves more than capable of getting the job done today, with millions upon millions upon millions of over-the-road miles as proof. Now, Orange EV is throwing its own data into the mix, with a deployed fleet of HDEVs that’s logged ten million hours of operation across more than 27 million low-speed, extreme duty miles.

“Ten million hours makes one thing clear: Orange EV has taken electric terminal trucks from possible to proven,” said Kurt Neutgens, President and CTO of Orange EV. “Our 340 customers are operating at an average of 97% uptime, with no compromises, proving you can cut costs, boost performance, and improve health and safety all at once.”

What might be more impressive than the miles covered, though, is how few trucks Orange has deployed to get to that number. The company reports that multiple units have already surpassed 30,000 hours of active service while others still are approaching a full decade of daily use — and all of them are still running on their original Orange-designed LFP battery packs.

Advertisement – scroll for more content

“Diesel yard trucks rarely achieve this level of durability, but Orange EV delivers with every truck,” adds Neutgens, a former Ford engineer. “Every hour of safe, reliable operation raises the bar for what fleets should expect from their equipment.”

Since delivering its first customer truck back in 2015, Orange EV has deployed more than 1,600 trucks across 40 states and four Canadian provinces. Together, these trucks have eliminated approximately 200,000 tons of carbon dioxide and saved fleets over $100 million (US) in fuel and maintenance costs alone. And, in more than 10 million hours of duty, not a single Orange EV yard truck battery has experienced a thermal event.

Electrek’s Take


e-TRIEVER electric terminal truck; via Orange EV.

Over at The Heavy Equipment Podcast, we had a chance to talk to Orange EV founder Kurt Neutgens ahead of last year’s ACT Expo for clean trucking. On the show (available here), Kurt explained how his experience at Ford helped inform his design ideology, and that the Orange EV was designed to be cost competitive with diesel options, even without subsidies.

Give it a listen, then let us know whether you think the big yard dogs’ success will help debunk the “messy middle” myths or not, in the comments.

SOURCE | IMAGESOrange EV.


If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them. 

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending