Tesla Gigafactory Berlin is reportedly in “total chaos,” according to a factory employee talking to Wired in a report highlighting labor issues at the factory.
The automaker is currently trying to simultaneously ramp up production at Gigafactory Texas and Gigafactory Berlin, both massive factories by any standard.
Tesla plans to have over 10,000 workers at each plant.
Hiring efforts on that scale are extremely difficult to execute, and now Wired reports that Tesla “can’t hire enough people, or keep them” at Gigafactory Berlin.
The publication describes a situation where Tesla has issues filing positions, retaining employees, and a high level of absenteeism at the factory.
One employee told Wired:
One current employee, who requested anonymity out of fear of losing their job, describes the Berlin gigafactory as “chaos.” “Some people are off sick longer than they’ve actually worked. There are people who I haven’t seen working for three weeks in six months. Many people are signed off sick because the motivation isn’t there,” they say, blaming poor working conditions. The exits involve temporary staff and permanent employees who have been there for over a year, hired before the gigafactory opened, they claim.
Tesla reportedly has 7,500 employees working at Gigafactory Berlin, and it currently has almost 400 open positions at the plant.
Interestingly, Tesla has gone outside of Germany to try to fill positions – almost 10% of workers are from outside the country, mostly from Poland. Gigafactory Berlin is only about an hour away from the German/Polish border.
Tesla is currently trying to achieve a production rate of 5,000 Model Y vehicles per week at the factory, a goal that Tesla has been aiming to achieve by the end of the year.
I wouldn’t worry too much about this. It’s hard to overstate just how difficult it is to hire over 10,000 people in any location over a relatively short period – only a few years in this case.
You are going to run into a lot of growing pains.
However, the results need to be there. I wouldn’t be shocked if Tesla doesn’t achieve its goal of 5,000 units per week by the end of the year, but it needs to be closer to it than 2,000 units.
I would expect Tesla to release an update on the production rate by the end of the year.
FTC: We use income earning auto affiliate links.More.
Earlier this month, California enacted new regulations for electric bikes that resulted in stricter speed limits on e-bikes with throttles. At the time, it was unclear how electric bike makers would respond to the new regulations, but we’re now starting to see at least one manufacturer pushing to bring its existing e-bikes owned by California residents into compliance.
The new laws remove ambiguity in the Class 2/Class 3 e-bike categorization. Formerly, many e-bikes were designed to operate in either category depending on the owner’s desires. Such bikes could operate as Class 2 e-bikes reaching max speeds of 20 mph (32 km/h) with a throttle, or as Class 3 e-bikes reaching higher speeds of 28 mph (45 km/h) on pedal assist-only.
In fact, the overwhelming majority of Class 3 e-bikes sold in the US used this design, offering hybrid compliance for functionality as both Class 2 and Class 3 e-bikes.
After California’s new laws removed any ambiguity between the classes, it is now clear that e-bikes in the state will need to function either only as Class 2 e-bikes (throttle up to 20 mph) OR Class 3 e-bikes (up to 28 mph but without any throttle).
It was unclear whether existing e-bikes already sold prior to the law’s enactment would receive an exemption, but bicycle manufacturer Specialized doesn’t seem to be taking any chances.
Specialized is the maker of the Globe line of cargo e-bikes, and recently sent out an update to owners that would help them bring their e-bikes into compliance with California’s new stricter regulations.
Like so many other electric bikes on the market, the Globe e-bikes came with throttles allowing 20 mph speeds without pedaling, but could also reach up to 28 mph on pedal assist.
A new firmware update promoted by the company will essentially restrict its e-bikes to purely Class 2 operation, removing the motor’s ability to assist the bike in going any faster, even when pedaling without throttle operation.
The update will also come with a Class 2 compliance sticker that replaces the previous Class 3 sticker.
To install the voluntary update, Globe owners are encouraged to visit their local Specialized dealer.
A copy of the update letter was shared on Reddit and can be seen below.
Electrek’s Take
This is an interesting approach, because it indicates an understanding by Specialized that it is responsible for any of its e-bikes already on the road that have now been made non-compliant by the new law.
There are basically two main options to “fix” these previously hybrid Class 2/3 e-bikes and bring them into compliance. One is to unplug and remove the throttle, turning the bike into a true Class 3 e-bike under CA regulations. The other is to remove the ability for the motor to assist at speeds over 20 mph, turning it into a Class 2 e-bike. That latter is what Specialized appears to have decided to go with, and it makes sense to me. If you asked most owners of these e-bikes about which they’d give up if they had to, they’d probably tell you “take my 21-28 mph speed but leave me my throttle”. Throttles are simply such a major part of e-bikes in North America that most riders would give up the whole bike if they were forced to give up the throttle.
The bigger question here is how many Globe riders will actually install this update. Since you need to not only opt-in to it, but also physically visit a dealer to do it, I have to imagine that the vast majority of riders will simply ignore the update altogether, keeping their faster non-compliant speed on an e-bike with a throttle. I’m not saying that’s the right thing to do, but I am saying it’s what will happen in the real world.
And if we are being honest, these Globes aren’t even the e-bikes that are at the heart of the issue. Most CA residents are more concerned with teenagers ripping down sidewalks on moped-style e-bikes, not the local moms and dads riding to Trader Joe’s on their sensible, upscale cargo e-bikes that just happen to have hybrid Class 2/3 performance.
FTC: We use income earning auto affiliate links.More.
Wind energy powered 20% of all electricity consumed in Europe (19% in the EU) in 2024, and the EU has set a goal to grow this share to 34% by 2030 and more than 50% by 2050.
To stay on track, the EU needs to install 30 GW of new wind farms annually, but it only managed 13 GW in 2024 – 11.4 GW onshore and 1.4 GW offshore. This is what’s holding the EU back from achieving its wind growth goals.
Three big problems holding Europe’s wind power back
Europe’s wind power growth is stalling for three key reasons:
Permitting delays. Many governments haven’t implemented the EU’s new permitting rules, making it harder for projects to move forward.
Grid connection bottlenecks. Over 500 GW(!) of potential wind capacity is stuck in grid connection queues.
Slow electrification. Europe’s economy isn’t electrifying fast enough to drive demand for more renewable energy.
Brussels-based trade association WindEurope CEO Giles Dickson summed it up: “The EU must urgently tackle all three problems. More wind means cheaper power, which means increased competitiveness.”
Permitting: Germany sets the standard
Permitting remains a massive roadblock, despite new EU rules aimed at streamlining the process. In fact, the situation worsened in 2024 in many countries. The bright spot? Germany. By embracing the EU’s permitting rules — with measures like binding deadlines and treating wind energy as a public interest priority — Germany approved a record 15 GW of new onshore wind in 2024. That’s seven times more than five years ago.
If other governments follow Germany’s lead, Europe could unlock the full potential of wind energy and bolster energy security.
Grid connections: a growing crisis
Access to the electricity grid is now the biggest obstacle to deploying wind energy. And it’s not just about long queues — Europe’s grid infrastructure isn’t expanding fast enough to keep up with demand. A glaring example is Germany’s 900-megawatt (MW) Borkum Riffgrund 3 offshore wind farm. The turbines are ready to go, but the grid connection won’t be in place until 2026.
This issue isn’t isolated. Governments need to accelerate grid expansion if they’re serious about meeting renewable energy targets.
Electrification: falling behind
Wind energy’s growth is also tied to how quickly Europe electrifies its economy. Right now, electricity accounts for just 23% of the EU’s total energy consumption. That needs to jump to 61% by 2050 to align with climate goals. However, electrification efforts in key sectors like transportation, heating, and industry are moving too slowly.
European Commission president Ursula von der Leyen has tasked Energy Commissioner Dan Jørgensen with crafting an Electrification Action Plan. That can’t come soon enough.
More wind farms awarded, but challenges persist
On a positive note, governments across Europe awarded a record 37 GW of new wind capacity (29 GW in the EU) in 2024. But without faster permitting, better grid connections, and increased electrification, these awards won’t translate into the clean energy-producing wind farms Europe desperately needs.
Investments and corporate interest
Investments in wind energy totaled €31 billion in 2024, financing 19 GW of new capacity. While onshore wind investments remained strong at €24 billion, offshore wind funding saw a dip. Final investment decisions for offshore projects remain challenging due to slow permitting and grid delays.
Corporate consumers continue to show strong interest in wind energy. Half of all electricity contracted under Power Purchase Agreements (PPAs) in 2024 was wind. Dedicated wind PPAs were 4 GW out of a total of 12 GW of renewable PPAs.
If you live in an area that has frequent natural disaster events, and are interested in making your home more resilient to power outages, consider going solar and adding a battery storage system. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. –trusted affiliate link*
FTC: We use income earning auto affiliate links.More.
In the Electrek Podcast, we discuss the most popular news in the world of sustainable transport and energy. In this week’s episode, we discuss the official unveiling of the new Tesla Model Y, Mazda 6e, Aptera solar car production-intent, and more.
As a reminder, we’ll have an accompanying post, like this one, on the site with an embedded link to the live stream. Head to the YouTube channel to get your questions and comments in.
After the show ends at around 5 p.m. ET, the video will be archived on YouTube and the audio on all your favorite podcast apps:
We now have a Patreon if you want to help us avoid more ads and invest more in our content. We have some awesome gifts for our Patreons and more coming.
Here are a few of the articles that we will discuss during the podcast:
Here’s the live stream for today’s episode starting at 4:00 p.m. ET (or the video after 5 p.m. ET):
FTC: We use income earning auto affiliate links.More.