It’s not that we haven’t seen our fair share of some weirdly named e-bikes before, but there’s something confusing about an electric bike named after an engine. I know that technically motors and engines can be the same thing, but it still feels weird to associate engines with e-bikes in American English. I’ll give Engwe a pass on the confusing and barely pronounceable name for the Engwe Engine Pro electric bike for the sole reason that it’s actually quite a good deal when you consider the performance to dollar ratio here.
Engwe Engine Pro tech specs
Motor: 1,000W peak-rated geared rear hub motor
Top speed: 24 mph (38 km/h)
Range: Claimed 62 miles (100 km) on pedal assist
Battery: 48V 16Ah (758 Wh)
Weight: 83 lb (37.8 kg )
Max load: 300 lb (136 kg)
Brakes: Hydraulic disc brakes on 160mm rotors
Extras: 8-speed Shimano drivetrain, large LCD color display, LED headlight and tail light, thumb throttle, mag wheels, full-suspension, removable battery, rear rack, fenders, kickstand
Engwe Engine Pro video review
Check out my real-world testing in my video review below. Or keep scrolling if you prefer to read… nerds.
Big, heavy and bulky – but fun!
Right away we have to address the elephant in the room, which is the e-bike itself. It’s as heavy as an elephant.
This thing is over 80 pounds of aluminum, steel, copper, magnets, rubber, and lithium. That’s a lot of bike to pick up.
Yes, it folds into a nice and compact bundle of metal, but it’s still a deadlift to get it off the ground. Like most e-bikes, though, the fairly low battery and the wheel-mounted motor help keep the weight low, and thus you don’t notice how heavy it is while you’re riding.
Once you get past the weight, though, things really start looking up. With 1,000W of peak power, the Engwe Engine Pro is ready to blast off as soon as you blip that left-side thumb throttle. The pedal assist is there to support you as well, though I generally give a little throttle on starts even when I plan on using pedal assist since there’s a bit of lag from when you start pedaling and when the power kicks in.
For comfort, Engwe gives us front and rear suspension, plus a set of 4-inch fat tires. I love the 20×4 tire size because it’s a good compromise between wide tires for comfort and all-terrain riding. Larger 26×4 tires roll a bit nicer and give a better ride over obstacles, but they are just so massive and heavy that they can sometimes feel unwieldy. The smaller diameter 20″ wheel size is a nice middle-ground, in my opinion.
For that suspension, the front fork is nicer than the rear shock. The fork is hydraulic and works pretty well for our recreational type of riding. The rear shock isn’t terrible, it’s just not too fancy. But combined with the front suspension and the fat tires, I don’t think anyone can complain about lack of comfort built into this design.
I did a mix of street of trail riding on the Engwe Engine Pro and found that the bike works well in both worlds. It’s not very efficient at either with those fat tires, but the big 758 Wh battery makes up for the lack of efficiency by simply shoving more battery cells in there. There’s two ways to solve the range problem and Engwe chose the “more battery” method.
As usual, the company follows the typical route of giving us some pie-in-the-sky range that no one will likely achieve in real life. In this case, they label the bike with a 62 mile (100 km) range. And as usual, that’s probably technically true if you’re sticking to the lowest power pedal assist mode. But don’t be fooled into thinking that you’ll get 62 miles of range on every ride.
If you’re like me and want to cruise at a solid 20-25 mph and blast around on throttle or in high power pedal assist levels, then you’ll get considerably less. The company says that at full power you may get around 22 miles (35 km) of range, which feels realistic to me based on my experience.
But the real kicker here is the price. For $1,699 you’re getting a lot of mileage. Not in terms of miles, but in terms of stuff. And the $1,369 price on Amazon is even more of a killer deal (or even just $1,299 if you clip the $70 coupon on the Amazon sales page)!
You get 1,000W of peak power, full suspension, hydraulic disc brakes (though on measly 160 mm rotors), a big ol’ rear rack, included fenders, LED lights, and a color display. The list just keeps on going!
There’s some serious value here, at least in terms of bang for your buck on the bike itself. I have no idea how well Engwe’s customer service and support stacks up against the more traditional US-based e-bikes companies. It could be fine, but they just haven’t been around for as many years to build up a reputation. In fact I had a small issue with the gearing and customer support helped me out immediately. But then again I’m an e-bike reviewer and so they’d have to be stupid not to put on a good show for me.
So there’s some tradeoff there, of course. You’re going with a company that doesn’t have a long and storied history in the US. But what did you expect? You can’t get way more performance like this for less cash than the competitors without giving something up.
Pound for pound, though, the Engwe Engine Pro gives you some great performance and some very nice features for your hard earned dough. If you don’t need a folder or full-suspension, this might not be the bike for you. But if you want it all in one package (and you want that package to fit in your trunk), then this might be the ticket.
FTC: We use income earning auto affiliate links.More.
Microplastics are increasingly being found in our bodies and food supply.
They are defined as pieces of plastic smaller than 5 millimeters — about the size of a pencil eraser. But they can also be much smaller, like the size of a virus particle or a strand of DNA.
Petrochemicals, the building blocks of plastic, are produced from oil and gas. The business is a small but profitable area of the fossil fuel industry, and any push back on the use of plastics is seen as a threat to the oil and gas industry.
“Where the industry is most vulnerable is on the human exposure to microplastics,” said Richard Wiles, president of the Center for Climate Integrity. “They’re going to have to try to tell us that exposure to microplastics every day, from birth to death is just fine. It’s just great. You should just eat more of it. It’s no problem. And I just don’t think they can win that argument.”
Scientific research on microplastics has spiked over the past few years. The National Library of Medicine’s PubMed database reported that the level of published scientific research related to the search term “microplastics” has nearly doubled from 2021 to 2024.
One study, published in Nature Medicine in February, found that human brains from 2024 had an average of about 7 grams of plastic, which is about 50% more plastic than brains examined from 2016. Scientists involved in the study told CNBC that those samples came from the frontal cortex, which ongoing research suggests may contain the highest levels of microplastic.
“If people think there are watchdogs measuring and understanding these types of nanoplastics as they are coming in, our food, our water, our air, I have not seen any evidence of that happening on any meaningful scale,” said Andrew West, a researcher at Duke University and one of the co-authors of the study.
Microplastics also have been found by scientists in the muscle tissue of fish and even in the fibers of fruits and vegetables.
“Thanks to advances in monitoring technology, we can now detect incredibly tiny amounts of substances like microplastics,” said Kimberly Wise White, vice president of regulatory and scientific affairs at the American Chemistry Council, a trade association for the plastics industry. “But finding something at extremely low levels does not mean it’s harmful. Plastics deliver proven benefits in health care, food safety, transportation and technology — benefits we can’t afford to lose.”
Industry giants are investing heavily into chemical production as oil demand is declining from electrification, U.S. tariffs and slowing economic growth in China and India. The International Energy Agency said electric vehicle adoption, for example, has displaced more than 1 million barrels of oil consumption per day in 2024 and that is expected to increase to 5 million barrels by 2030.
In its 2024 outlook, BP said the declining use of oil in transportation was being offset by oil use for petrochemical production. While chemical uses include a variety of products like detergent and paints, polyethylene plastics are a major part of the chemicals business.
“Major oil and gas companies are playing a key role in the supply chain for plastics. And then there are a whole set of many other companies [on] the downstream side that are involved in creating the plastics,” said Yale University energy and environmental economics professor Kenneth Gillingham. “The surplus of natural gas is coming about because of fracking, and it’s led to low prices of natural gas.”
In the U.S., about 1.5% of natural gas is converted into chemicals that are used to make plastics and other consumer products, according to the University of Wisconsin-Madison.
Saudi Aramco, the biggest oil company in the world, has also increased its activity in the space. In 2020, it bought a 70% stake in petrochemicals company SABIC. While fourth-quarter 2024 results were lower than expected, SABIC made nearly $35 billion from petrochemicals last year.
“We’re unquestionably, as a society, better off having plastics than no plastics, but we’re facing the consequences of having those plastics,” Gillingham said.
Nissan just got one step closer to unlocking the “holy grail” of EV batteries for drivers. With help from LiCAP Technologies, Nissan is gearing up for its first vehicles powered by all-solid-state EV batteries.
Nissan taps LiCAP Tech for all-solid-state EV batteries
Often called the holy grail of EV batteries, solid-state batteries promise to cut costs, enable longer driving range and faster charging times, while also improving safety compared to current lithium-ion batteries.
Although many claims have been made in the lab, producing battery tech is not easy. At least, not on a mass scale.
Nissan believes it may have an advantage after securing a partnership with US-based LiCAP Technologies. The new alliance will focus on developing a dry electrode production process to build all-solid-state EV batteries at a mass scale.
Advertisement – scroll for more content
By using LiCAP’s proprietary Activated Dry Electrode technology, Nissan claims to have “significant advantages” in production efficiency and performance.
Compared to traditional solvent-process electrodes, using a dry-process method eliminates the need for drying and solvent recovery. Nissan said it will significantly reduce manufacturing costs and the environmental impact.
Nissan N7 electric sedan (Source: Dongfeng Nissan)
The new partnership marks a significant step as Nissan prepares to launch next-generation models powered by all-solid-state EV batteries.
Nissan opened its first all-solid-state battery line at its Yokohama plant in Japan earlier this year. The company aims to launch its first EVs equipped with in-house all-solid-state batteries by fiscal year 2028. In the meantime, Nissan said it plans to double down on the new battery tech by accelerating R&D efforts.
2026 Nissan LEAF (Source: Nissan
In June, Nissan’s director of product planning in Europe, Christop Ambland, confirmed with Auto Express that the first vehicles “will be ready for SSB (solid-state batteries) in 2028.”
Electrek’s Take
Nissan is not the only one chasing the promising new battery tech. Toyota, Mercedes-Benz, Volkswagen, Stellantis, and Honda are among the many carmakers and other companies racing to bring all-solid-state EV batteries to market.
Even BYD and CATL, which are dominating the global battery market, plan to launch vehicles powered by solid-state batteries around 2027.
Mercedes-Benz is already testing “the first car powered by a lithium-metal solid-state battery on the road” through a partnership with Factorial Energy, while others are quickly advancing.
Meanwhile, SAIC MG is preparing to launch the first EV with a semi-solid-state battery, the new MG4, which will be sold globally. The company will reveal prices in September, with deliveries set to begin before the end of 2025.
Which company will deliver the first production EV powered by all-solid-state EV batteries? Let us know your thoughts below.
FTC: We use income earning auto affiliate links.More.
Elon Musk says Tesla might never bring its new ‘Model YL’, a new six-seat variant of the Model Y launched in China this week, to the US, and the reason for this is ridiculous.
He thinks Tesla won’t need it because of, you guessed it: autonomy.
Musk has been framing autonomy as Tesla’s salvation. He is on record as saying that you shouldn’t invest in Tesla unless you believe it will lead in autonomous driving, despite being wrong about Tesla solving autonomy virtually by the end of every year for the last six years.
The CEO’s belief that Tesla has been consistently on the verge of solving autonomy for the last 6 years has led to many bad decisions.
Musk also canceled new Tesla models, such as the highly anticipated “$25,000 Tesla”, because he believed it wouldn’t be needed due to the advent of autonomy, despite an internal report that confirmed this was a bad idea.
Now, the CEO is adding another bad decision to the list.
Earlier this week, Tesla launched a new Model YL, a longer version of its best-selling electric SUV with six seats, in China.
As we pointed out in our article, this is a popular segment in China, and there’s already a lot of competition. Still, Tesla could easily bring this version to other markets, such as North America, where there’s less EV competition, and it could prove popular, as bigger vehicles are the norm in the US.
But CEO Elon Musk has now thrown cold water on the expansion of the Model YL in North America.
In response to Omar Qazi, a Tesla influencer known for defending Tesla and Musk’s every move, claiming that the reason Musk had yet to comment or share Tesla’s launch of Model YL is because it’s only available in China for now, Musk responded that Model YL is not planned for production in the US until the end of 2026 and it might never come:
“This variant of the Model Y doesn’t start production in the US until the end of next year. Might not ever, given the advent of self-driving in America.”
The CEO suggests that the new variant’s production in the US will lag behind China by more than a year, or may never materialize, because he believes the advent of autonomous driving in the US will render it obsolete.
Electrek’s Take
This is reason number 69,420 why Elon Musk shouldn’t be CEO of Tesla anymore.
As I already stated, I believe Model YL would be a bigger success for Tesla in North America than in China.
In China, Tesla was already expensive. Over 90% of Model 3 and Model Y buyers go for the base RWD versions of those vehicles due to the pricing.
Tesla’s decision to offer a more expensive AWD model won’t significantly increase its volumes in China.
Furthermore, EV competition is already intense in China, where Chinese EV companies don’t suffer from tariffs like they do in other markets. There are already several 6-seater electric SUV options that are cheaper than the new Model YL.
However, in North America, the Model YL could potentially undercut the few existing 6-seater and third-row electric SUV options and prove popular.
Yet, Musk delays the launch by more than a year and claims it may never happen due to autonomy.
It’s so stupid because even with autonomy, which I don’t believe will be as widespread as Musk claims next year, the Model YL would make sense as it would be a better Robotaxi with six seats.
For the sake of Tesla, Musk has to go. It’s unfortunate that shareholders don’t realize this or are too concerned about the short-term impact on the stock.
FTC: We use income earning auto affiliate links.More.