Believe it or not, the Amish are loving electric bikes
Electric bicycles have been finding favor in a growing number of communities. From hunters to surfers and even soldiers, e-bikes and their low-cost, far-reaching transportation options have permeated a surprising number of different groups and use cases. The latest community adopting e-bikes en masse may be even more of a surprise: the Amish.
Amish communities, more often known for their black buggies pulled by horses, have been increasingly turning to electric bikes as an alternative form of transportation.
But how could that be?
It’s a common misconception that Amish communities entirely shun electricity and technology. Rather, each Amish church and its surrounding community decides its own rules regarding how much technology is integrated into daily life. There is no single Amish doctrine or set of regulations, since these rules are decided at the individual community level.
That means electric bicycles, which have become a much lower impact solution than cars, are booming in many Amish communities.
David Mullet, a member of the Old Order Amish Church and the owner of E-bikes of Holmes County, a popular bicycle shop in a heavily Amish-populated area of Ohio, explained that e-bikes are simply faster and easier than horses:
“It’s a lot quicker to jump on your bike and go into town than it is to bring your horse into the barn, harness it to the buggy, and go. It’s a lot quicker and you travel faster too.”
Many Amish are permitted to ride in cars that they don’t own or operate themselves, which means it can be common to hire a driver for specific trips. But the practice can become expensive, as anyone who uses Uber on a regular basis will already know.
E-bikes have thus become an effective solution to the problem of commuting longer distances without hiring a driver.
As Mullet continued:
“Commuting to work is probably the number one way that electric bikes are being used. Some people are commuting eight to ten miles, some only one or two miles, but they jump on their bike and go. With a traditional bike, that would never have been considered. They would have had to hire a driver or the place of work would have had to hire a driver to bring in their employees. That still happens, but there are more people who commute to work every day on e-bikes.”
It is common for Amish areas to avoid dependence on the outside world, and thus the communities that do use electricity will often rely heavily on solar panels and other local forms of electricity generation.
That aligns well with electric bicycles, which have small batteries that are easily charged by equally small solar panels.
Mullet’s bike shop is entirely off-grid, with two dozen solar panels on the roof to power the store’s electricity. Public e-bike charging stations are also becoming more popular in Amish country, which are simple to create with a series of outdoor weather-protected 120VAC outlets.
Powered by a solar panel array and battery bank, the outlets help riders charge up their e-bikes without relying on an electricity connection provided from outside of their own community.
An Amish e-bike charging station recently shared on Reddit seems to be quite busy, and bike theft in the community is probably non-existent.
Electrek’s Take
Well there you go, yet another example of e-bikes changing lives for the better.
It’s great to see how many different types of folks have discovered the usefulness of electric bikes, and for such different reasons.
The ability to go completely off-grid with their e-bikes is also a neat aspect to the Amish community’s adoption of e-bikes. It’s a great example of how these powerful transportation alternatives can make a difference in areas of the world without reliable electricity supply, such as in third world countries.
FTC: We use income earning auto affiliate links. More.
The US Department of Energy (DOE) has released an encouraging new report revealing that 90% of wind turbine materials are already recyclable using existing infrastructure, but tackling the remaining 10% needs innovation.
That’s why the Biden administration’s Bipartisan Infrastructure Law has allocated over $20 million to develop technologies that address these challenges.
Why this matters
The wind energy industry is growing rapidly, but questions about what happens to turbines at the end of their life are critical. Recyclable wind turbines means not only less waste but also a more affordable and sustainable energy future.
According to Jeff Marootian, principal deputy assistant secretary for the Office of Energy Efficiency and Renewable Energy, “The US already has the ability to recycle most wind turbine materials, so achieving a fully sustainable domestic wind energy industry is well within reach.”
The report, titled, “Recycling Wind Energy Systems in the United States Part 1: Providing a Baseline for America’s Wind Energy Recycling Infrastructure for Wind Turbines and Systems,” identifies short-, medium-, and long-term research, development, and demonstration priorities along the life cycle of wind turbines. Developed by researchers at the National Renewable Energy Laboratory, with help from Oak Ridge and Sandia National Laboratories, the findings aim to guide future investments and technological innovations.
What’s easily recyclable and what’s not
The bulk of a wind turbine – towers, foundations, and steel-based drivetrain components – is relatively easy to recycle. However, components like blades, generators, and nacelle covers are tougher to process.
Blades, for instance, are often made from hard-to-recycle materials like thermoset resins, but switching to recyclable thermoplastics could be a game changer. Innovations like chemical dissolution and pyrolysis could make blade recycling more viable in the near future.
Critical materials like nickel, cobalt, and zinc used in generators and power electronics are particularly important to recover.
Key strategies for a circular economy
To make the wind energy sector fully sustainable, the DOE report emphasizes the adoption of measures such as:
- Better decommissioning practices – Improving how turbine materials are collected and sorted at the end of their life cycle.
- Strategic recycling sites – Locating recycling facilities closer to where turbines are decommissioned to reduce costs and emissions.
- Advanced material substitution – Using recyclable and affordable materials in manufacturing.
- Optimized material recovery – Developing methods to make recovered materials usable in second-life applications.
Looking ahead
The DOE’s research also underscores the importance of regional factors, such as the availability of skilled workers and transportation logistics, in building a cost-effective recycling infrastructure. As the US continues to expand its wind energy capacity, these findings provide a roadmap for minimizing waste and maximizing sustainability.
More information about the $20 million in funding available through the Wind Turbine Technology Recycling Funding Opportunity can be found here. Submission deadline is February 11.
Read more: The California grid ran on 100% renewables with no blackouts or cost rises for a record 98 days
If you live in an area that has frequent natural disaster events, and are interested in making your home more resilient to power outages, consider going solar and adding a battery storage system. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. –trusted affiliate link*
FTC: We use income earning auto affiliate links. More.
Mazda is finally stepping up with plans to build its first dedicated EV. The upcoming Mazda EV will be made in Japan and based on a new in-house platform. Here’s what we know about it so far.
The first dedicated Mazda EV is coming soon
Although Mazda isn’t the first brand that comes to mind when you think of electric vehicles, the Japanese automaker is finally taking a step in the right direction.
Mazda revealed on Monday that it plans to build a new module pack plant in Japan for cylindrical lithium-ion battery cells.
The new plant will use Panasonic Energy’s battery cells to produce modules and EV battery packs. Mazda plans to have up to 10 GWh of annual capacity at the facility. The battery packs will power Mazda’s first dedicated EV, which will also be built in Japan using a new electric vehicle platform.
Mazda said it’s “steadily preparing for electrification technologies” under its 2030 Management Plan. The strategy calls for a three-phase approach through 2030.
The first phase calls for using its existing technology. In the second stage, Mazda will introduce a new hybrid system and EV-dedicated vehicles in China.
The third and final phase calls for “the full-fledged launch” of EVs and battery production. By 2030, Mazda expects EVs to account for 25% to 40% of global sales.
Mazda launched the EZ-6, an electric sedan, in China last October. It starts at 139,800 yuan, or around $19,200, and is made by its Chinese joint venture, Changan Mazda.
Based on Changan’s hybrid platform, the electric sedan is offered in EV and extended-range (EREV) options. The all-electric model gets up to 600 km (372 miles) CLTC range with fast charging (30% to 80%) in 15 minutes.
At 4,921 mm long, 1,890 mm wide, and 1,485 mm tall with a wheelbase of 2,895 mm, Mazda’s EZ-6 is about the size of a Tesla Model 3 (4,720 mm long, 1,922 mm wide, and 1,441 mm tall with a 2,875 mm wheelbase).
Inside, the electric sedan features a modern setup with a 14.6″ infotainment, a 10.1″ driver display screen, and a 50″ AR head-up display. It also includes zero-gravity reclining seats and smart features like voice control.
The EZ-6 is already off to a hot sales start, with 2,445 models sold in November. According to Changan Mazda, the new EV was one of the top three mid-size new energy vehicle (NEV) sedans of joint ventures sold in China in its first month listed.
Will Mazda’s first dedicated EV look like the EZ-6? We will find out with Mazda aiming to launch the first EV models on its new in-house platform in 2027. Stay tuned for more.
FTC: We use income earning auto affiliate links. More.
-
Sports2 years ago‘Storybook stuff’: Inside the night Bryce Harper sent the Phillies to the World Series
-
Sports9 months agoStory injured on diving stop, exits Red Sox game
-
Sports1 year agoGame 1 of WS least-watched in recorded history
-
Sports2 years agoMLB Rank 2023: Ranking baseball’s top 100 players
-
Sports3 years ago
Team Europe easily wins 4th straight Laver Cup
-
Environment2 years agoJapan and South Korea have a lot at stake in a free and open South China Sea
-
Environment2 years agoGame-changing Lectric XPedition launched as affordable electric cargo bike
-
Business2 years agoBank of England’s extraordinary response to government policy is almost unthinkable | Ed Conway