That appears to be the case here with this week’s find. It’s an inflatable vessel that is jet ski shaped, though I’m not sure it fulfills all of the requirements to become a jet ski – namely the water jet turbine.
In fact, there’s actually no motor at all. It seems to be just the 3.5 meter (11 ft) boat itself, but at least it comes with a convenient transom in back to mount your own motor.
And in our case, we can slap on an electric outboard to turn this thing into not just a bad idea on water, but a green bad idea on water.
If you really wanted to stay true to the advertising, you could actually get an electrically powered jet ski-style water turbine to add to this boat. Amazon can hook you up with an impressive offering that looks like it would require cutting an inlet hole in the bottom of the boat and an exit somewhere through the rear transom.
Short of building a true jet ski though, I think an overpowered trolling motor will probably suffice. The vendor for the motor linked above seems to propose that is equivalent to 10 hp, which sounds reasonable for a small watercraft like this.
Technically the motor is only rated at 2.2 kW, which is around 3 hp. But we generally find that small electric outboards offer performance of around 3x the rated power of combustion engine outboards due to their much higher torque. It may not rip as fast as the larger gas engine below, but then again maybe it will. Who knows until we find out ourselves?!
You’ll need a whopping 60V of battery for that awesome little electric outboard, which I’m hoping will fit either under the seat or under the “hood” of the jet ski.
I’d actually be pretty interested to get a look under that hood to see what’s going on with that steering wheel. Since the jet ski/inflatable boat seems to be set up for a transom-mounted trolling motor, I don’t know how they expect to tie in steering linkage to something like that.
One thing is for sure: At around $2k, this will definitely be the cheapest new jet ski you could buy, electric or otherwise. Personal watercraft aren’t cheap, and the electric ones carry a significant premium.
But if you’re handy, don’t mind wiring up a motor and battery yourself, and also don’t mind a steering wheel for show while you twist around to control a tiller motor, then you just might wind up with one of the most unique vessels on your local lake or river.
And consider the ease of transport! You probably don’t even need a trailer like you would for a traditional jet ski. The entire thing weighs just 176 kg (388 lb), though the spec sheet also says it is made from fiberglass, so perhaps the data isn’t quite accurate. Either way, this inflatable vessel can’t weigh too much. And the fact that you can deflate it to fit in the back of a van or SUV is a big benefit too. Or you can just leave it inflated and probably fit it in a truck with the tail gate down. Not my mini-truck, but maybe your truck.
At $2,025 for this thing, it’s pretty darn cheap – though that’s before the cost of batteries and a motor. Don’t forget though that there’d be several thousand dollars in shipping costs, customs import charges, taxes, broker fees, etc. Also, don’t forget that you should absolutely not buy this thing. While I’ve picked up some cool and weird little EVs from Alibaba over the years, it’s never a good idea. The process is long and complicated, not to mention fraught with extra charges at every step of the way. And you never know if the company who just received your wire transfer is even going to deliver your product in the end, which is just another fun little stressor that comes with shopping on Alibaba. So please, don’t join the ranks of my foolish readers and risk your hard earned money on something weird like this.
But if you ignore my warnings and decide to go for it, be sure to let me know what happened! And maybe update your will before the maiden voyage.
FTC: We use income earning auto affiliate links.More.
In a bold bid to combat the crippling air pollution crisis in its capital, Delhi, Indian lawmakers have begun high-level discussions about a plan to phase out gas and diesel combustion vehicles by 2035 – a move that could cause a seismic shift in the global EV space and provide a cleaner, greener future for India’s capital.
Long considered one of the world’s most polluted capital cities, Indian capital Delhi is taking drastic steps to cut back pollution with a gas and diesel engine ban coming soon – but they want results faster than that. As such, Delhi is starting with a city-wide ban on refueling vehicles more than 15 years old, and it went into effect earlier this week. (!)
“We are installing gadgets at petrol pumps which will identify vehicles older than 15 years, and no fuel will be provided to them,” said Delhi Environment Minister Manjinder Singh Sirsa … but they’re not stopping there. “Additionally, we will intensify scrutiny of heavy vehicles entering Delhi to ensure they meet prescribed environmental standards before being allowed entry.”
The Economic Times is reporting that discussions are underway to pass laws requiring that all future bus purchases will be required to be electric or “clean fuel” (read: CNG or hydrogen) by the end of this year, with a gas/diesel ban on “three-wheelers and light goods vehicles,” (commercial tuk-tuks and delivery mopeds) potentially coming 2026 to 2027 and a similar ban privately owned and operated cars and bikes coming “between 2030 and 2035.”
Electrek’s Take
Xpeng EV with Turing AI and Bulletproof battery; via XPeng.
Last week, Parker Hannifin launched what they’re calling the industry’s first certified Mobile Electrification Technology Center to train mobile equipment technicians make the transition from conventional diesel engines to modern electric motors.
The electrification of mobile equipment is opening new doors for construction and engineering companies working in indoor, environmentally sensitive, or noise-regulated urban environments – but it also poses a new set of challenges that, while they mirror some of the challenges internal combustion faced a century ago, aren’t yet fully solved. These go beyond just getting energy to the equipment assets’ batteries, and include the integration of hydraulic implements, electronic controls, and the myriad of upfit accessories that have been developed over the last five decades to operate on 12V power.
At the same time, manufacturers and dealers have to ensure the safety of their technicians, which includes providing comprehensive training on the intricacies of high-voltage electric vehicle repair and maintenance – and that’s where Parker’s new mobile equipment training program comes in, helping to accelerate the shift to EVs.
“We are excited to partner with these outstanding distributors at a higher level. Their commitment to designing innovative mobile electrification systems aligns perfectly with our vision to empower machine manufacturers in reducing their environmental footprint while enhancing operational efficiency,” explains Mark Schoessler, VP of sales for Parker’s Motion Systems Group. “Their expertise in designing mobile electrification systems and their capability to deliver integrated solutions will help to maximize the impact of Parker’s expanding METC network.”
Advertisement – scroll for more content
The manufacturing equipment experts at Nott Company were among the first to go through the Parker Hannifin training program, certifying their technicians on Parker’s electric motors, drives, coolers, controllers and control systems.
“We are proud to be recognized for our unwavering dedication to advancing mobile electrification technologies and delivering cutting-edge solutions,” says Nott CEO, Markus Rauchhaus. “This milestone would not have been possible without our incredible partners, customers and the team at Nott Company.”
In addition to Nott, two other North American distributors (Depatie Fluid Power in Portage, Michigan, and Hydradyne in Fort Worth, Texas) have completed the Parker certification.
Electrek’s Take
T7X all-electric track loader at CES 2022; via Doosan Bobcat.
With the rise of electric equipment assets like Bobcat’s T7X compact track loader and E10e electric excavator that eliminate traditional hydraulics and rely on high-voltage battery systems, specialized electrical systems training is becoming increasingly important. Seasoned, steady hands with decades of diesel and hydraulic systems experience are obsolete, and they’ll need to learn new skills to stay relevant.
Certification programs like Parker’s are working to bridge that skills gap, equipping technicians with the skills to maximize performance while mitigating risks associated with high-voltage systems. Here’s hoping more of these start popping up sooner than later.
Based on a Peterbilt 579 commercial semi truck, the ReVolt EREV hybrid electric semi truck promises 40% better fuel economy and more than twice the torque of a conventional, diesel-powered semi. The concept has promise – and now, it has customers.
Austin, Texas-based ReVolt Motors scored its first win with specialist carrier Page Trucking, who’s rolling the dice on five of the Peterbilt 579-based hybrid big rigs — with another order for 15 more of the modified Petes waiting in the wings if the initial five work out.
The deal will see ReVolt’s “dual-power system” put to the test in real-world conditions, pairing its e-axles’ battery-electric torque with up to 1,200 miles of diesel-extended range.
ReVolt Motors team
ReVolt Motors team; via ReVolt.
The ReVolt team starts off with a Peterbilt, then removes the transmission and drive axle, replacing them with a large genhead and batteries. As the big Pete’s diesel engine runs (that’s right, kids – the engine stays in place), it creates electrical energy that’s stored in the trucks’ batteries. Those electrons then flow to the truck’s 670 hp e-axles, putting down a massive, 3500 lb-ft of Earth-moving torque to the ground at 0 rpm.
Advertisement – scroll for more content
The result is an electrically-driven semi truck that works like a big BMW i3 or other EREV, and packs enough battery capacity to operate as a ZEV (sorry, ZET) in ports and urban clean zones. And, more importantly, allows over-the-road drivers to hotel for up to 34 hours without idling the engine or requiring a grid connection.
That ability to “hotel” in the cab is incredibly important, especially as the national shortage of semi truck parking continues to worsen and the number of goods shipped across America’s roads continues to increase.
And, because the ReVolt trucks can hotel without the noise and emissions of diesel or the loss of range of pure electric, they can immediately “plug in” to existing long-haul routes without the need to wait for a commercial truck charging infrastructure to materialize.
“Drivers should not have to choose between losing their longtime routes because of changing regulatory environments or losing the truck in which they have already made significant investments,” explains Gus Gardner, ReVolt founder and CEO. “American truckers want their trucks to reflect their identity, and our retrofit technology allows them to continue driving the trucks they love while still making a living.”
If all of that sounds familiar, it’s probably because you’ve heard of Hyliion.
In addition to being located in the same town and employing the same idea in the same Peterbilt 579 tractor, ReVolt even employs some of the same key players as Hyliion: both the company’s CTO, Chandra Patil, and its Director of Engineering, Blake Witchie, previously worked at Hyliion’s truck works.
Still, Hyliion made their choice when they shut down their truck business. ReVolt seems to have picked up the ball – and their first customer is eager to run with it.
“Our industry is undergoing a major transition, and fleet owners need practical solutions that make financial sense while reducing our environmental impact,” said Dan Titus, CEO of Page Trucking. “ReVolt’s hybrid drivetrain lowers our fuel costs, providing our drivers with a powerful and efficient truck, all without the need for expensive charging infrastructure or worrying about state compliance mandates. The reduced emissions also enable our customers to reduce their Scope 2 emissions.”
Page Trucking has a fleet of approximately 500 trucks in service, serving the agriculture, hazardous materials, and bulk commodities industries throughout Texas. And, if ReVolt’s EREV semis live up to their promise, expect them to operate a lot more than 20 of ’em.