World-renowned motorcycle designer Erik Buell’s electric bike company FUELL has just launched two new models of e-bikes, known as the Flluid-2 and Flluid-3. These US-assembled electric bikes aren’t just claiming to be the longest range options on the market but are also said to offer “a unique riding experience setting them clearly ahead in the crowded e-bike industry.”
The new e-bikes are designed to be true car replacers for many riders, as CTO Erik Buell explained:
“We used the knowledge gained from our initial foray into the electric bike market with Flluid-1 to develop a superior urban transportation solution, making sure that Flluid-2 & 3 are true and viable alternatives to cars.”
The Flluid-2 is described as an “ultra-long-range powerhouse” with its two removable battery packs totaling 2 kWh of capacity. That doubles the battery capacity of the first-generation FUELL Flluid-1 and enables an impressive range of up to 225 mi (362 km) on a single charge.
For an easier-to-mount step-through option, the Flluid-3 offers a single 1 kWh battery that should be enough for anyone that can live with a still-impressive 110 mi (177 km) range.
Both models offer throttle-enabled 750 W continuous-rated Valeo mid-drive motors, though the throttle is limited to just 6 km/h or 3.7 mph in Europe for regulatory compliance. The motor will also carry a 250 W rating in Europe, though both the EU and US versions are listed at 130 Nm of torque, making the motor one of the strongest mid-drives available on retail e-bikes.
The FUELL Flluid-2 and Flluid-3 will both reach 20 mph (32 km/h) in the US or 25 km/h (15 mph) in Europe. A speed version of each model will be offered, known as the Flluid-2S and Flluid-3S, which will reach speeds of up to 28 mph (45 km/h) in both the US and EU models.
Both bikes include automatic shifting with a 450% gear range, electric bike-specific road tires, integrated LED lighting, front suspension, fenders/rack package, and a Gates Carbon Drive belt-drive setup instead of a typical bicycle chain.
The e-bikes are designed to fit a range of riders from 5’1″ to 6’5″ (155 to 195cm) and are “geometrically optimized to provide stable, confident, yet incredibly nimble steering and handling.”
Both the FUELL Flluid-2 and Flluid-3 come standard with low-maintenance components, including hydraulic disc brakes and belt drivetrains.
As Buell explained, his goal with the design of the new bikes was to create a high-performance two-wheeler that would be as easy to use as a car and with a similar range:
“The creation of the FUELL Flluid-2 & 3 e-bikes was a complex and demanding journey that took many years of research and development. We faced a lot of challenges on our way such as creating e-bikes that comfortably fit customers from 5’ tall all the way to 6’4” tall, packing 2,000 Wh of battery into the frame without getting it too massive, providing a ‘just right’ balance of agility and confident handling to the riding experience, etc. I am proud to announce that we have successfully overcome all these challenges, developing e-bikes that meet the needs of today’s urban commuters.
“Many e-bike customers are coming from driving a car or motorcycle and are not current bicyclists. This customer is looking for an e-bike that is simple and easy to use as their motor vehicle with a similar range.”
The models are launching on Indiegogo via a crowdfunding campaign, with early bird prices starting at US $3,999 for the Flluid-2 and $3,699 for the Flluid-3. Both of those figures mark a discount of over 30% off of the MSRP for each model as part of the promotional launch pricing.
We generally don’t cover products launching on crowdfunding campaigns unless they come from reputable companies that have already demonstrated the ability to deliver products to customers. In this case, Erik Buell is a highly respected figure in the motorcycle world and has gained prominence in the electric bicycle world for the well-received FUELL Flluid-1 electric bike, which has been making successful deliveries for the last two years. While that doesn’t guarantee the success of a crowdfunding campaign, it stacks the deck in riders’ favor.
FTC: We use income earning auto affiliate links.More.
As “extreme” weather events become more commonplace, the demand for reliable and portable energy continues to rise. In response to that growing demand for dependable off-grid power, Volvo has developed the new PU500 Battery Energy Storage System (BESS) designed to take electrical power when it’s needed most.
Designed to be deployable in a number of environments at a moment’s notice, the Volvo Energy PU500 BESS is equipped with approximately 500 kWh of usable battery capacity (up to 540 kWh total). More than enough juice, in other words, to power a remote construction site, disaster response effort, or even a music festival – anything that needs access to reliable electricity beyond a grid connection.
That’s great, but what sets the PU500 apart from other battery storage solutions is its integrated 240 kW DC fast charger.
“With an integrated CCS2 charger, the PU500 is designed to work with all brands of electric equipment, trucks, and passenger cars,” says Niklas Thulin, Head of BESS Product Offer at Volvo Energy. “This ensures that no matter what type of electric vehicle or machinery you rely on, the PU500 can provide the power you need, making it a truly flexible solution for any grid constrained site or location.”
Advertisement – scroll for more content
The integrated charger in the PU500 has the impressive ability to charge a heavy equipment asset (be that an electric semi truck or something like a wheel loader) in under two hours. Its on-board capacity allows to fully recharge up to 3 electric HD trucks or 20 electric cars per day, making it an incredibly versatile disaster response asset.
In a bold bid to combat the crippling air pollution crisis in its capital, Delhi, Indian lawmakers have begun high-level discussions about a plan to phase out gas and diesel combustion vehicles by 2035 – a move that could cause a seismic shift in the global EV space and provide a cleaner, greener future for India’s capital.
Long considered one of the world’s most polluted capital cities, Indian capital Delhi is taking drastic steps to cut back pollution with a gas and diesel engine ban coming soon – but they want results faster than that. As such, Delhi is starting with a city-wide ban on refueling vehicles more than 15 years old, and it went into effect earlier this week. (!)
“We are installing gadgets at petrol pumps which will identify vehicles older than 15 years, and no fuel will be provided to them,” said Delhi Environment Minister Manjinder Singh Sirsa … but they’re not stopping there. “Additionally, we will intensify scrutiny of heavy vehicles entering Delhi to ensure they meet prescribed environmental standards before being allowed entry.”
The Economic Times is reporting that discussions are underway to pass laws requiring that all future bus purchases will be required to be electric or “clean fuel” (read: CNG or hydrogen) by the end of this year, with a gas/diesel ban on “three-wheelers and light goods vehicles,” (commercial tuk-tuks and delivery mopeds) potentially coming 2026 to 2027 and a similar ban privately owned and operated cars and bikes coming “between 2030 and 2035.”
Electrek’s Take
Xpeng EV with Turing AI and Bulletproof battery; via XPeng.
Last week, Parker Hannifin launched what they’re calling the industry’s first certified Mobile Electrification Technology Center to train mobile equipment technicians make the transition from conventional diesel engines to modern electric motors.
The electrification of mobile equipment is opening new doors for construction and engineering companies working in indoor, environmentally sensitive, or noise-regulated urban environments – but it also poses a new set of challenges that, while they mirror some of the challenges internal combustion faced a century ago, aren’t yet fully solved. These go beyond just getting energy to the equipment assets’ batteries, and include the integration of hydraulic implements, electronic controls, and the myriad of upfit accessories that have been developed over the last five decades to operate on 12V power.
At the same time, manufacturers and dealers have to ensure the safety of their technicians, which includes providing comprehensive training on the intricacies of high-voltage electric vehicle repair and maintenance – and that’s where Parker’s new mobile equipment training program comes in, helping to accelerate the shift to EVs.
“We are excited to partner with these outstanding distributors at a higher level. Their commitment to designing innovative mobile electrification systems aligns perfectly with our vision to empower machine manufacturers in reducing their environmental footprint while enhancing operational efficiency,” explains Mark Schoessler, VP of sales for Parker’s Motion Systems Group. “Their expertise in designing mobile electrification systems and their capability to deliver integrated solutions will help to maximize the impact of Parker’s expanding METC network.”
Advertisement – scroll for more content
The manufacturing equipment experts at Nott Company were among the first to go through the Parker Hannifin training program, certifying their technicians on Parker’s electric motors, drives, coolers, controllers and control systems.
“We are proud to be recognized for our unwavering dedication to advancing mobile electrification technologies and delivering cutting-edge solutions,” says Nott CEO, Markus Rauchhaus. “This milestone would not have been possible without our incredible partners, customers and the team at Nott Company.”
In addition to Nott, two other North American distributors (Depatie Fluid Power in Portage, Michigan, and Hydradyne in Fort Worth, Texas) have completed the Parker certification.
Electrek’s Take
T7X all-electric track loader at CES 2022; via Doosan Bobcat.
With the rise of electric equipment assets like Bobcat’s T7X compact track loader and E10e electric excavator that eliminate traditional hydraulics and rely on high-voltage battery systems, specialized electrical systems training is becoming increasingly important. Seasoned, steady hands with decades of diesel and hydraulic systems experience are obsolete, and they’ll need to learn new skills to stay relevant.
Certification programs like Parker’s are working to bridge that skills gap, equipping technicians with the skills to maximize performance while mitigating risks associated with high-voltage systems. Here’s hoping more of these start popping up sooner than later.