The US House just voted to restore solar tariffs – here’s why that’s dumb
The House of Representatives voted to restore tariffs on solar panels made in four Southeast Asian countries – but that move would seriously hurt the US solar industry.
The 221-202 bipartisan vote sends the measure to the Democratic-controlled Senate – 12 Democrats voted for it, and 8 Republicans voted against it. President Joe Biden has said he will veto the legislation.
In 2022, President Joe Biden waived tariffs on solar products made in Cambodia, Malaysia, Thailand, and Vietnam while the US Department of Commerce (DOC) conducted an investigation into whether those imports were circumventing duties on goods made in China, thus violating US law. The DOC is expected to issue its decision next week.
The majority of legislators voted for this measure to boost US solar manufacturers who say they can’t compete with cheaper solar products made in Asia. But while that’s well intended, it’s very poorly executed, due to timing.
The bottom line is, US solar manufacturing is growing, and it does need legislative support – the Inflation Reduction Act does that. But US solar manufacturing is nowhere near robust enough to supply the huge and growing domestic demand for solar products. That’s why Biden waived the tariff – to keep the supply chain going while US domestic manufacturing ramps up.
The reinstated tariffs are going to boost costs for US solar developers and slow down the supply chain, and thus solar developments needed to fight climate change. We don’t have time to delay the fight against climate change.
While this might seem protective to US solar manufacturing, it’s harmful to US solar installation, which currently employs many more Americans than manufacturing does.
In short, the House made a bad decision that could seriously harm the US solar industry.
George Hershman, CEO of SOLV Energy, the US’s largest utility-scale solar provider, said in an email statement today:
This resolution could put companies on the hook to pay more than a billion dollars in retroactive tariffs and jeopardize tens of thousands of jobs across the country. President Biden’s pause on new solar tariffs provided a much-needed bridge for companies to deploy clean energy and keep American workers on the payroll as the US builds out a dramatic ramp-up in our domestic solar manufacturing sector.
And Abigail Ross Hopper, president and CEO of the Solar Energy Industries Association (SEIA), also issued a statement:
Today the House of Representatives failed America’s 255,000 solar workers and put the near-term impact of the IRA at risk. The legislation will impose $1 billion in retroactive tariffs and cause 30,000 Americans to lose their jobs this year.
The two-year solar tariff moratorium was imposed as a strategic bridge to stand up U.S.-based manufacturing capacity while allowing developers to keep building projects and move us toward our clean energy goals. Companies are making massive investments in manufacturing facilities across the country thanks to the IRA, and all this legislation serves to do is undercut American businesses as they invest billions in capital and seek to employ thousands of workers.
We are urging senators to see through this political charade and examine the facts at hand.
The US cannot produce enough solar panels and cells to meet demand, and the remaining 14 months of this moratorium gives us time to close the gap. The United States can get there and become a global leader in clean energy manufacturing and development. Overturning the moratorium at this stage puts that future at risk.
Read more: Here’s how a new US protectionist move is backfiring badly on the US solar industry
Photo: iStock
If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you’re finding a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage. EnergySage is a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20 to 30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and you share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.
FTC: We use income earning auto affiliate links. More.
![This electric excavator has battery swap tech that lets it recharge in minutes [update]](https://i0.wp.com/electrek.co/wp-content/uploads/sites/3/2025/04/electric-excavator.jpg?resize=1200,628&quality=82&strip=all&ssl=1)
The electric construction equipment experts at XCMG just released a new, 25 ton electric crawler excavator ahead of bauma 2025 – and they have their eye on the global urban construction, mine operations, and logistical material handling markets.
UPDATE: telematics announcement.
Powered by a high-capacity 400 kWh lithium iron phosphate battery capable of delivering up to 8 hours of continuous operation, the XE215EV electric excavator promises uninterrupted operation at a lower cost of ownership and with even less downtime than its diesel counterparts.
XCMG is delivering on part of that reduced downtime promise with the lower maintenance and easier repair needs of electric equipment, and delivering on the rest of it with lickety-quick DC fast charging that can recharge the machine’s massive battery in 1.5-2 hours … but that’s not the slick bit. The XCMG XE125EV can be powered up without leaving the job site thanks to its BYD battery swap technology.
We first covered XCMG and its battery swap technology back in January, and covered similar battery-swap tech being developed by MOOG Construction offshoot ZQUIP, as well – but while XCMG’s battery tech has been in production for several years, it’s still not widely known about in the West (even within the industry).
XCMG showed off its latest electric equipment at the December 2024 bauma China, including an updated version of its of its 85-ton autonomous electric mining truck that features a fully cab-less design – meaning there isn’t even a place for an operator to sit, let alone operate. And that’s too bad, because what operator wouldn’t want to experience an electric truck putting down 1070 hp more than 16,000 lb-ft of torque!?
Easy in, easy out
The best part? All of the company’s heavy equipment assets – from excavators to terminal tractors to dump trucks and wheel loaders – all use the same 400 kWh BYD battery packs, Milwaukee tool style. That means an equipment fleet can utilize x number of vehicles with a fraction of the total battery capacity and material needs of other asset brands. That’s not just a smart use of limited materials, it’s a smarter use of energy.
You can check out all the XE215EV’s specs at this tear sheet, and get an in-person look at the Chinese company’s latest electric excavator this week in Munich, Germany.
Telematics announcement at bauma
Earlier today, XCMG launched its next-generation Xrea Global Telematics Platform, integrating IoT, big data, cloud computing, and AI to enable what it’s caling, “seamless cross-border fleet management.”
The new telematics platform supports a dozen languages via PC and mobile interfaces, and offers real-time diagnostics, predictive maintenance, and data-driven optimization of both the vehicle and the vehicle’s batteries, empowering equipment managers and fleet operators to track fleets across town, or across time zones.
“XCMG remains committed to advancing engineering technology to empower a sustainable future. Our mission is to deliver efficient, intelligent, and eco-friendly lifecycle solutions for global clients,” said Mr. Yang Dongsheng, Chairman of XCMG Group and XCMG Machinery. “Today, 19% of our product portfolio comprises green innovations under our ‘Green Mountain’ new energy line, with full electrification across all series underway.”
SOURCE | IMAGES: XCMG; via PR Newswire.
FTC: We use income earning auto affiliate links. More.
![A vast 600 MW Texas solar farm just hit a major milestone [update]](https://i0.wp.com/electrek.co/wp-content/uploads/sites/3/2025/01/Hornet-Solar-Texas-2.jpg?resize=1200,628&quality=82&strip=all&ssl=1)
Renewable developer Vesper Energy has cut the ribbon on Hornet Solar in Swisher County, Texas, one of the largest single-phase solar farms in the US.
As Electrek reported in January, the 600-megawatt (MW) Hornet Solar includes over 1.36 million modules covering more than 6 square miles. The project will contribute more than $100 million in new tax revenue to Swisher County and deliver 600 MWac of energy–enough to power 160,000 homes annually.
January 30, 2025: “The seamless coordination between our team and our EPC partner, Blattner, has enabled us to remain ahead of schedule and on budget while ensuring quality throughout the process,” said Juan Suarez, co-CEO of Irving-based Vesper Energy.
Hornet Solar uses bifacial solar panels mounted on a single-axis tracking system to maximize efficiency. The solar farm is connected to Oncor Electric’s transmission system within ERCOT and is contracted to provide power to four off-take partners through individual Virtual Power Purchase Agreements (VPPAs).
The Hornet Solar project in the Texas Panhandle is on track to be fully online by spring 2025.
Texas is a utility-scale solar leader in the US, with a ranking of No. 2 and 37,713 MW currently installed. It’s projected to install 51,144 MW over the next five years and move into the No. 1 spot, according to the Solar Energy Industries Association (SEIA). The total solar investment in the state is $45.2 billion.
On January 21, the SEIA, Conservative Texans for Energy Innovation (CTEI), Advanced Power Alliance (APA), and the Texas Solar + Storage Association (TSSA) reported that existing and expected utility-scale solar, wind, and battery storage projects will contribute over $20 billion in total tax revenue – and pay Texas landowners $29.5 billion – over the projects’ lifetimes.
Read more: Texas just became No 1 in the US for most utility-scale solar
If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.
FTC: We use income earning auto affiliate links. More.
-
Sports2 years ago‘Storybook stuff’: Inside the night Bryce Harper sent the Phillies to the World Series
-
Sports1 year agoStory injured on diving stop, exits Red Sox game
-
Sports1 year agoGame 1 of WS least-watched in recorded history
-
Sports2 years agoMLB Rank 2023: Ranking baseball’s top 100 players
-
Sports4 years ago
Team Europe easily wins 4th straight Laver Cup
-
Environment2 years agoJapan and South Korea have a lot at stake in a free and open South China Sea
-
Environment2 years agoGame-changing Lectric XPedition launched as affordable electric cargo bike
-
Business3 years agoBank of England’s extraordinary response to government policy is almost unthinkable | Ed Conway