The AYRO Vanish has grabbed headlines over the past year as it rolls ever closer to production at AYRO’s Texas factory. Now the electric mini-truck’s final step ahead of manufacturing has begun as the Vanish starts street-legal homologation.
The AYRO Vanish is an electric utility vehicle that is designed to fit into the low-speed vehicle (LSV) federal designation. The mini-truck uses a lightweight architecture to limit the entire vehicle weight and maximize the allowable payload.
The Vanish boasts a payload of up to 1,200 lb (544 kg), which is fairly close to many standard-sized pickup trucks. For comparison, a 2023 Ford F-150’s payload capacity starts at 1,310 lb (594 kg). The company also indicated that it plans to produce a non-street legal variant that will have a higher payload capacity of 1,800 pounds (816 kg). That model would be applicable to work sites, campuses and other areas where use on public roads is not required.
Unlike standard pickup trucks, the Vanish offers highly adaptable configurations. Optional rear cargo configurations including food boxes, flat beds, utility beds with three-sided tailgates, and van boxes for secure storage all point to potential commercial applications for the vehicle.
And those future commercial customers could be getting their hands on the Vanish’s steering wheel sooner rather than later. Heading for homologation testing means that the company is now closer than ever to putting those various designs on the road.
As AYRO CEO Tom Wittenschlaeger explained:
“Now that we’ve completed our internal testing, it’s time to ensure that the award-winning Vanish meets requirements of our national governing bodies. Once we’ve completed this process and receive final approval, we can begin delivering vehicles to our customers and dealers.”
In order for any road-worthy vehicle to be considered for sale, the vehicle must go through homologation to ensure it is safe and complies with government regulations.
LSVs have reduced regulatory hurdles, but there are still many safety requirements and design considerations to be addressed. The vehicles must meet regulations for the construction, design, durability, and performance requirements as outlined by federal governing bodies. In the US, this process is governed by the National Highway Traffic Safety Administration (NHTSA).
This complex process of homologation allows for vehicles to be officially classified by date and category as well as have official and certifiable technical information and specifications. The Vanish is completing homologation for both the United States and Canada, for which testing includes the Federal Motor Vehicle Safety Standards (FMVSS) 500, Canada Motor Vehicle Safety Standards (CMVSS) 500 and California Air Resources Board (C.A.R.B.).
In parallel with its homologation phase, AYRO is now planning to begin Low Rate Initial Production (LRIP) by early June to begin building the first 50 Vanish units that will be used as demo models for signed dealers.
The company plans to enter full-scale production upon the successful completion of its first 50 units.
As AYRO’s senior vice president of programs added:
“Our team has worked diligently to prepare for this day. This is one of the final steps in our product development process. Concurrently with homologation, we plan to begin LRIP and immediately following begin delivering vehicles to our customers and dealers.”
The AYRO Vanish opened for orders earlier this month, launching at a starting price of $33,990. While that price is more expensive than several other imported electric mini-trucks, the Vanish’s modular design (and soon-to-be street legal status) is a key differentiator.
AYRO’s vice president of Dealer Sales, Terry Kahl, previously explained the advantages of a modular platform:
With swappable bed configurations, we believe dealers can find a use case for the Vanish with almost any of their existing clientele. We have indications of interest from a rapidly growing number of dealers and now incoming dealers can find added value in that AYRO is accepting their pre-orders even before they join our dealer network. It should be an absolute win-win for our existing and onboarding dealers as well as future dealers.
FTC: We use income earning auto affiliate links.More.
CASE arrived at bauma 2025 with an innovative new electric wheel loader with a striking, sharp-edged design that ditches the traditional operator cab in favor of remote or autonomous operation for improved accessibility and safety.
CASE says the cabin-less design of the Impact electric wheel loader enhances operational flexibility by enabling operations in extreme environments and adverse weather conditions. It also means that job site, disaster recovery, or even rescue operations can continue 24/7, with operators in different time zones logging in for their shifts.
More important – and more practical – is CASE’s claim that the new Impact concept, “marks a significant advancement in accessibility, as operators with motor impairments and other disabilities can now operate the machine without physical limitations, representing an important step toward inclusivity in the industry.”
Advertisement – scroll for more content
Along with integrated AI, a full suite of sensors, and autonomous operation built in, CASE says the Impact is a glimpse into a smarter, safer, and more sustainable working future.
Electrek’s Take
Driven by an aging workforce and not enough new talent entering the field, virtually every industrial field is struggling with an international equipment operator shortage. The concept of automation addresses some of that, but remote operation open up the field significantly, and I could easily older operators forced out of work due to injury getting back into it or younger operators halfway around the world who would give anything for an opportunity – and paycheck – like this could provide.
Smart move from CASE, and it’s great to hear them call that out specifically.
Electricity grid demands are on the rise in part due to energy-hungry technology like AI, and while experts believe renewable energy alone is not enough, it is essential to a broader supply equation. But with funding freezes, subsidy walk backs and tariffs on key components all on the table, solar, wind, and hydrogen companies are working harder than ever to make their business models work, even if they never intended to rely on federal support for the long term.
“One of the hats I used to wear was planning for the City of New York. For the longest time, there was decreasing [energy] demand,” said Aseem Kapur, chief revenue officer of GM Energy, an arm of General Motors that the company introduced in 2022. “Over the course of the last five or so years, that equation has changed. Utilities are facing unprecedented demand.”
Beyond New York City, U.S. energy demand is poised to grow upwards of 16% in the next five years, a big difference from the 0.5%it grew each year on average from 2001 to 2024, according to the Center for Strategic & International Studies.
For the renewable energy companies looking to break into the mainstream, subsidies have helped them get through their early days of growth. But President Trump has targeted these solutions from the first day of his presidency. In an executive order from Jan. 20, the Trump administration promised to “unleash” an era of fossil fuels exploration and production while also eliminating “unfair subsidies and other ill-conceived government-imposed market distortions that favor EVs over other technologies.” Last week, Trump issued an EO pushing for more coal production.
In a six-year study breaking down energy subsidies from the U.S. Energy Information Administration from 2022 (the most recent edition), 46% of federal energy subsidies were associated with renewable energy, making them the largest slice of the energy pie. At the same time, natural gas and petroleum subsidies became a net cost to the government in 2022, reversing what had been a source of revenue inflows.
“Every company I’ve talked to recognizes that subsidies were required to help them through an R&D cycle, but they all believed they had to get to a cost parity point,” said Ross Meyercord, CEO of Propel Software (and former Salesforce CIO), whose manufacturing software solution serves energy clients like Invinity Energy Systems and Eos Energy Storage. “Every company had that baked into their business model. It may happen faster than they were planning on, and obviously that creates challenges.”
Meyercord believes that clean energy companies can handle either a subsidy decrease or a rise in tariffs, but both at the same time will add substantial stress to the market, which could have negative downstream effects on the grid — and the people who rely on it.
‘Not going to get rid of fossil fuels overnight’
Like any energy source, Kapur says success always comes down to economics. In the current environment, with interest rates, and fears that inflation will reignite, he said, “it’s going to come down to, ‘What are the most cost-effective solutions that can be brought to market?'” That may vary by region, he added, but notes that solar and energy storage have already reached parity in many cases and, in some instances, are below the cost of producing energy from natural gas or coal-powered resources.
This economics equation is true even in Texas, where the state’s Attorney General Ken Paxton has voiced anti-renewables sentiment in favor of the coal market (his lawsuit against major investment firm BlackRock and others in late November claims these firms sought to “weaponize their shares to pressure the coal companies to accommodate ‘green energy’ goals”). Wind accounts for 24% of the state’s energy profile, according to the Texas Comptroller, suggesting a penchant for any energy source that’s viable and cost-effective.
“The reality is, we’re not going to get rid of fossil fuels overnight,” said Whit Irvin Jr., CEO of hydrogen energy company Q Hydrogen. “They are going to have a very significant piece in our energy ecosystem for decades, and as new technologies come out on a larger scale, the use of fossil fuels will be curtailed, but we need to continue research, development and innovation in a way that makes sense.”
Irvin emphasizes the need for innovation from all sides, including creating new technologies that have a massive impact on large scalability and carbon reduction. “We don’t want to turn off that spigot. We just want to make sure that it’s going to the right places,” he said.
Hydrogen energy itself is one such source of innovation. Hydrogen ranges in sustainability depending on the fuel it uses to source its hydrogen. For example, green hydrogen — the only climate-neutral form of hydrogen energy — stems from renewable energy surplus. Grey hydrogen stems from natural gas methane. Q Hydrogen is working to open the world’s first renewable hydrogen power plant that will be economically viable without a subsidy. Irvin Jr. says the company, which produces hydrogen using water, plans to launch its New Hampshire facility this year.
“Hydrogen fuel cells are a really good way to provide backup power or even prime power to a data center that would be considered essentially off grid,” said Irvin, likening hydrogen fuel cell production to a form of battery storage. While hydrogen is not the most economical because of its comparative immaturity, Irvin said heightened energy demand will outcompete cost sensitivity for tech companies requiring more and more data storage.
While hydrogen projects continue to reap federal incentives to propel the industry forward, Irvin said subsidies were never part of his company’s business equation. “If they do exist, we’ll be able to take advantage of them,” he said. “If they don’t exist, that will still be fine for us.”
But that might not be true for every alternative energy company depending on where they’re at in the R&D cycle. Changes in federal incentives have real power to shift the progression of renewable energy in the U.S., especially when combined with tariffs that could stifle companies’ international relationships and supply chains. Meyercord, Kapur and Irvin all foresee private industry partnerships making a huge impact for the future of the grid, but recognize that the strain is increasing as energy tech of all kinds becomes smarter and more grid-dependent.
Based on the excellent Hyundai IONIQ 5 N platform, Vanwall gives its Vandervell H-GT a high-performance aesthetic makeover inspired by the classic Lancia Delta HF Integrale. But what makes this body kit a genuine “high-performance” upgrade isn’t the way it makes the car look: it’s the 500 lb. weight savings!
Developed by Austrian racing team ByKOLLES Racing and invoking the name of a 1950s Formula 1 team, the Vandervell H-GT is essentially a new Hyundai IONIQ 5 N in aggressive, Lancia Delta-inspired carbon-fiber bodywork that the company claims gives the car an, “unprecedented weight optimization in this vehicle category.”
The H-GT’s new “thin wall” carbon fiber body slashes the car’s weight by over 230 kg (507 lbs.), which means ByKOLLES’ new Vandervell can do anything that Hyundai’s “special” IONIQ 5 N hot hatch can do. Only faster.
The car was first announced in 2023 (along with the renderings shown, below), when ByKOLLES was competing in the World Endurance Championship (WEC) with what used to be called an LMP car – but they keep changing the names of these things so it could be a Daytona Prototype, Hypercar, or even a 24 Hour LeMans Wonkavator by now.
The important part, however, is that a few of these cars have now broken cover, with ex-Formula 1 supremo, Bernie Ecclestone, having been seen trying the new-age Lancia on for size.
The Vanwall Vandervell website still shows the same €128,000 ($145,405, as I type this) price tag and specs it did in 2023, which either means they haven’t updated it in a while, were really, really good at pricing the thing in the first place, or both.
That’s presumably on top of the IONIQ N’s already hefty $66,100 price tag.