Connect with us

Published

on

ISRO has successfully carried out two more tests as part of plans to further validate and refine the performance of the propulsion system that would be used to launch India’s first human spaceflight mission Gaganyaan. The “hot tests” on Gaganyaan Service Module Propulsion System (SMPS) were conducted at the ISRO Propulsion Complex, Mahendragiri, in Tamil Nadu on Wednesday.

The Gaganyaan project envisages demonstration of human spaceflight capability by launching a crew of three members to an orbit of 400km for a three days mission and bring them back safely to earth, by landing in Indian sea waters, according to ISRO.

“These tests will further validate and refine the performance of the propulsion system, ensuring its readiness for the upcoming Gaganyaan mission,” it said.

“These tests (carried out on July 26) marked the second and third hot tests in the Service Module – System Demonstration model (SM-SDM) phase 2 test series. The first hot test was conducted on July 19, 2023,” the Bengaluru-headquartered national space agency said in a statement.

ISRO said three more hot tests are scheduled, to demonstrate de-boosting requirements and off-nominal mission scenarios.

The SMPS is designed and developed by the Liquid Propulsion System Centre located at Bengaluru and Valiamala, Thiruvananthapuram.

During the tests on Wednesday, the thrusters were operated in both continuous and pulse mode, in sync with the mission profile.

The initial hot test which lasted for 723.6 seconds focused on demonstrating Orbital Module injection and the calibration burn of 100 Newton thrusters and Liquid Apogee Motor (LAM) engines.

“The calibration burn was essential to identify and isolate any non-operational engines. The LAM engines and reaction control system (RCS) Thrusters performed as expected,” the statement said.

“The latter hot test, with a duration of 350 seconds, aimed to demonstrate the circularisation of the Orbital Module to achieve the final orbit. During this test, the LAM engines operated in continuous mode, while the RCS Thrusters fired in pulse mode,” it added.


Samsung launched the Galaxy Z Fold 5 and Galaxy Z Flip 5 alongside the Galaxy Tab S9 series and Galaxy Watch 6 series at its first Galaxy Unpacked event in South Korea. We discuss the company’s new devices and more on the latest episode of Orbital, the Gadgets 360 podcast. Orbital is available on Spotify, Gaana, JioSaavn, Google Podcasts, Apple Podcasts, Amazon Music and wherever you get your podcasts.
Affiliate links may be automatically generated – see our ethics statement for details.

Continue Reading

Science

How NASA Saved a Dying Camera Near Jupiter with Just Heat

Published

on

By

How NASA Saved a Dying Camera Near Jupiter with Just Heat

NASA’s Juno spacecraft, in orbit around Jupiter, had a huge problem when its JunoCam imager started to fail after sitting through the planet’s harsh radiation belts for so many orbits. Designed to only last through the initial few orbits, JunoCam astonishingly endured 34 orbits. Yet by the 47th orbit, the effects of radiation damage became visible, and by the 56th orbit, images were almost illegible. With few alternatives and time slipping away before a close flyby of Jupiter’s volcanic moon Io, engineers made a daring but creative gamble. Employing an annealing process, they sought to resuscitate the imager by warming it up—an experiment that proved successful.

Long-distance fix

According to NASA, JunoCam’s camera resides outside the spacecraft’s radiation-shielded interior and is extremely vulnerable. After several orbits, it started developing damage thought to be caused by a failing voltage regulator. From a distance of hundreds of millions of miles, the mission team implemented a last-ditch repair: annealing. The technique, which subjects materials to heat in order to heal microscopic defects, is poorly understood but has been succeeding in the lab. By heating the camera to 77°F, scientists wished to reorient its silicon-based parts.

At first, efforts were for naught, but only days before the December 2023 flyby of Io, the camera unexpectedly recovered—restoring close-to-original image quality just in time to photograph previously unseen volcanic landscapes.

Radiation Lessons for the Future

Though the camera showed renewed degradation during Juno’s 74th orbit, the successful restoration has led to broader applications. The team has since applied similar annealing strategies to other Juno instruments, helping them withstand harsh conditions longer. Juno’s findings are now informing spacecraft design across the board. “We’re learning how to build radiation-tolerant systems that benefit both defense and commercial satellites,” said Juno’s principal investigator Scott Bolton. These findings would inform future missions, such as those visiting outer planets or working in high-radiation environments near Earth, in the Van Allen belts. Juno’s mission continues to pay dividends with unexpected innovations—a lesson in how a small amount of heat can do wonders.

Continue Reading

Science

NASA’s X-59 Moves Closer to First Flight with Advanced Taxi Tests and Augmented Vision

Published

on

By

NASA’s X-59 Moves Closer to First Flight with Advanced Taxi Tests and Augmented Vision

X-59 of NASA has been designed from the ground to fly at a faster speed of sound without making thunderous sonic booms, which are usually associated with supersonic flight. This 99-foot aircraft, which features a logically elongated design, jettisons the front windscreen and is now heading towards the runway. Pilots can see what is at the front through an augmented reality (AR) enabled closed-circuit camera system, which is termed by NASA as the External Vision System (XVS). NASA took control of an experimental aircraft and performed taxi tests on it during this month.

X-59’s Futuristic Design: Eliminating Sonic Booms with External Vision System

According to As per NASA, the test pilot Nils Larson, during the test, drove the X-59 at the runway by keeping a low speed. This is done to ensure the working of the steering and braking systems of the jet. Lockheed Martina and NASA would perform the taxi tests at high speed, in which the X-59 will move faster to make it to the speed at which it will go for takeoff.

Taxi tests are held at the U.S. Air Force’s Plant 42 facility in Palmdale, California. The contractors and the Air Force utilise the plant for manufacturing and testing the aircraft. Lockheed Martin has developed this aircraft, whose Skunk Works is found in Plant 42.

Taxi Tests at Plant 42: NASA and Lockheed Martin Prepare X-59 for First Flight

Some advanced aircraft of the U.S. military were developed to a certain extent at Plant 42, together with the B-2 Spirit, the F-22 Raptor, and the uncrewed RQ-170 Sentinel spy drone.

SOFIA airborne observatory aircraft, which is a flying telescope called Plant 42, home recently retired. The space shuttle of the agency is the world’s first reusable spacecraft; these were assembled and tested at the facility.

Such taxi tests have started over the last months. NASA worked in collaboration with the Japan Aerospace Exploration Agency for testing a scale model of the X-59 in the supersonic wind tunnel to measure the noise created under the aircraft.

Continue Reading

Science

Unusual Plasma Waves Above Jupiter’s North Pole Can Possibly Be Explained

Published

on

By

Unusual Plasma Waves Above Jupiter’s North Pole Can Possibly Be Explained

In recent observations, NASA’s Juno spacecraft has significantly detected the presence of a variety of plasma waves. The emergence of these waves on Jupiter’s powerful magnetic field is projected to be surprising, as their existence was never marked in the planetary magnetospheres. However, scientists might have come out with an explanation. Furthermore, the current studies have been questioned by scientists surfacing the activity at the North Pole. The article below will exemplify the findings and shed light on the plasmas. 

Uncovering Mystery at Jupiter’s North Pole 

According to a paper published in the Physical Review Letters, the scientists have uncovered the explanation behind the presence of these strange waves. They mainly suspect that the formation of these waves lies behind their evolution as a plasma, which later transforms into something different. 

Inside Jupiter’s Plasmas and Their Variants 

Plasmas are best referred to as the waves that pass through the amalgamation of the charged particles in the planet’s magnetosphere.These plasma waves come across in two forms: One, Langmuir waves, which are high-pitched lights crafted with electrons, while the other, Alfven waves, are slower, formed by ions (heavy particles). 

About Juno’s Findings

As unveiled by the Juno, the findings turned out to be questionable after the scientists noted that in Jupiter’s far northern region, the plasma waves were relatively slower. The magnetic field is about 40 times stronger than the Earth’s, but scientists were shocked to witness the results as the waves were slower. To analyse this further, a team from the University of Minnesota, led by Robert Lysak, identified the possibility of Alfven waves transforming into Langmuir waves. Post studying the data extracted from the Juno, the researchers then began to compare the relationship between the plasma wave frequency and number. 

According to Lysak’s research team, near Jupiter’s north pole, there might be a potential pathway of Alfven waves, which are massive in numbers, transforming into Langmuir waves. Scientists are also predicting that the reason behind evolution might be strong electrons that are shooting upwards at a very high energy. This discovery was made in the year 2016. Considering the current findings, the researchers indicate that Jupiter’s magnetosphere may comprise a new type of plasma wave mode that occurs during high magnetic field strength. 

Continue Reading

Trending