The Addmotor Graoopro electric bike has just been launched, and it comes with more than just an unpronounceable name. The company also claims it carries a rated range of up to 210 miles (338 km).
The Addmotor Graoopro is a cargo electric bike with two battery slots, each supporting a 48V 20Ah battery with 960 Wh of capacity.
The single battery version, which is priced at US $1,999, claims a range of 105 miles (169 km). The dual battery version is significantly pricier at US $2,698 but is said to be good for up to 210 miles (338 km) on a single charge.
That works out to an efficiency of around 9 Wh/mile, which is reasonable on low power pedal assist, but throttle operation would certainly see reduced ranges of around half of those figures. Even so, that’s some pretty darn long range in an electric bike.
The Addmotor Graoopro employs the rarely seen triple consecutive vowel nomenclature as well a 750W rear hub motor rated for 1,000W of peak power. That motor powers the bike up to a top speed of 20 mph (32 km/h).
The electric cargo bike carries a 300 lb (136 kg) passenger weight rating as well as an additional 150 lb (68 kg) rear rack weight rating, though it is not clear to which standard those capacity ratings have been tested.
The bike includes seven levels of pedal assist and perhaps most importantly, it claims to include a torque sensor for more natural feeling pedal assist response. However, the description of the bike having “36 torque sensing points” makes it sound like Addmotor is incorrectly describing a magnetic cadence sensor as a torque sensor.
Addmotor takes a dig at the Lectric XPedition whose second battery peeks up above the rack level
The Addmotor Graoopro features the EB2.0 LED lighting system that we’ve seen on several other Addmotor e-bikes we’ve tested. That system includes front and rear LEDs as well as turn signals in the rear light housing.
Interestingly, the company has opted to include several lower-tier components on the bike. For a cargo e-bike with a claimed 450 lb (204 kg) weight rating, the inclusion of a front quick release skewer axle and mechanical disc brakes on the front and rear wheel seem like surprisingly meager choices.
An 80mm hydraulic front fork should at least smooth out some of the bumps, allowing the 24″ wheels to tackle the rest of the terrain. A fender set is included along with a wooden foot platform for those that want to rest their feet together in the center of the bike, though most of the other interesting accessories related to cargo jobs must be purchased separately to install on the bike.
The bike is now on pre-order with four different colorways available, though there is no indication of exactly when it plans to ship.
FTC: We use income earning auto affiliate links.More.
On today’s fleet-focused episode of Quick Charge, we talk about a hot topic in today’s trucking industry called, “the messy middle,” explore some of the ways legacy truck brands are working to reduce fuel consumption and increase freight efficiency. PLUS: we’ve got ReVolt Motors’ CEO and founder Gus Gardner on-hand to tell us why he thinks his solution is better.
You know, for some people.
We’ve also got a look at the Kenworth Supertruck 2 concept truck, revisit the Revoy hybrid tandem trailer, and even plug a great article by CCJ’s Jeff Seger, who is asking some great questions over there. All this and more – enjoy!
New episodes of Quick Charge are recorded, usually, Monday through Thursday (and sometimes Sunday). We’ll be posting bonus audio content from time to time as well, so be sure to follow and subscribe so you don’t miss a minute of Electrek’s high-voltage daily news.
Got news? Let us know! Drop us a line at tips@electrek.co. You can also rate us on Apple Podcasts and Spotify, or recommend us in Overcast to help more people discover the show.
If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.
FTC: We use income earning auto affiliate links.More.
Thanks to Trump’s repeated executive order attacks on US clean energy policy, nearly $8 billion in investments and 16 new large-scale factories and other projects were cancelled, closed, or downsized in Q1 2025.
The $7.9 billion in investments withdrawn since January are more than three times the total investments cancelled over the previous 30 months, according to nonpartisan policy group E2’s latest Clean Economy Works monthly update.
However, companies continue to invest in the US renewable sector. Businesses in March announced 10 projects worth more than $1.6 billion for new solar, EV, and grid and transmission equipment factories across six states. That includes Tesla’s plan to invest $200 million in a battery factory near Houston that’s expected to create at least 1,500 new jobs. Combined, the projects are expected to create at least 5,000 new permanent jobs if completed.
Michael Timberlake of E2 said, “Clean energy companies still want to invest in America, but uncertainty over Trump administration policies and the future of critical clean energy tax credits are taking a clear toll. If this self-inflicted and unnecessary market uncertainty continues, we’ll almost certainly see more projects paused, more construction halted, and more job opportunities disappear.”
Advertisement – scroll for more content
March’s 10 new projects bring the overall number of major clean energy projects tracked by E2 to 390 across 42 states and Puerto Rico. Companies have said they plan to invest more than $133 billion in these projects and hire 122,000 permanent workers.
Since Congress passed federal clean energy tax credits in August 2022, 34 clean energy projects have been cancelled, downsized, or shut down altogether, wiping out more than 15,000 jobs and scrapping $10 billion in planned investment, according to E2 and Atlas Public Policy.
However, in just the first three months of 2025, after Trump started rolling back clean energy policies, 13 projects were scrapped or scaled back, totaling more than $5 billion. That includes Bosch pulling the plug on its $200 million hydrogen fuel cell plant in South Carolina and Freyr Battery canceling its $2.5 billion battery factory in Georgia.
Republican-led districts have reaped the biggest rewards from Biden’s clean energy tax credits, but they’re also taking the biggest hits under Trump. So far, more than $6 billion in projects and over 10,000 jobs have been wiped out in GOP districts alone.
And the stakes are high. Through March, Republican districts have claimed 62% of all clean energy project announcements, 71% of the jobs, and a staggering 83% of the total investment.
A full map and list of announcements can be seen on E2’s website here. E2 says it will incorporate cancellation data in the coming weeks.
To limit power outages and make your home more resilient, consider going solar with a battery storage system. In order to find a trusted, reliable solar installer near you that offers competitive pricing, check outEnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and you share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get startedhere. –trusted affiliate link*
FTC: We use income earning auto affiliate links.More.
Tesla has reportedly delayed the launch of its new “affordable EV,” which is believed to be a stripped-down Model Y, in the United States.
Last year, Tesla CEO Elon Musk made a pivotal decision that altered the automaker’s direction for the next few years.
The CEO canceled Tesla’s plan to build a cheaper new “$25,000 vehicle” on its next-generation “unboxed” vehicle platform to focus solely on the Robotaxi, utilizing the latest technology, and instead, Tesla plans to build more affordable EVs, though more expensive than previously announced, on its existing Model Y platform.
Musk has believed that Tesla is on the verge of solving self-driving technology for the last few years, and because of that, he believes that a $25,000 EV wouldn’t make sense, as self-driving ride-hailing fleets would take over the lower end of the car market.
Advertisement – scroll for more content
However, he has been consistently wrong about Tesla solving self-driving, which he first said would happen in 2019.
In the meantime, Tesla’s sales have been decreasing and the automaker had to throttle down production at all its manufacturing facilities.
That’s why, instead of building new, more affordable EVs on new production lines, Musk decided to greenlight new vehicles built on the same production lines as Model 3 and Model Y – increasing the utilization rate of its existing manufacturing lines.
Those vehicles have been described as “stripped-down Model Ys” with fewer features and cheaper materials, which Tesla said would launch in “the first half of 2025.”
Reuters is now reporting that Tesla is seeing a delay of “at least months” in launching the first new “lower-cost Model Y” in the US:
Tesla has promised affordable vehicles beginning in the first half of the year, offering a potential boost to flagging sales. Global production of the lower-cost Model Y, internally codenamed E41, is expected to begin in the United States, the sources said, but it would be at least months later than Tesla’s public plan, they added, offering a range of revised targets from the third quarter to early next year.
Along with the delay, the report also claims that Tesla aims to produce 250,000 units of the new model in the US by 2026. This would match Tesla’s currently reduced production capacity at Gigafactory Texas and Fremont factory.
The report follows other recent reports coming from China that also claimed Tesla’s new “affordable EVs” are “stripped-down Model Ys.”
The Chinese report references the new version of the Model 3 that Tesla launched in Mexico last year. It’s a regular Model 3, but Tesla removed some features, like the second-row screen, ambient lighting strip, and it uses fabric interior material rather than Tesla’s usual vegan leather.
The new Reuters report also said that Tesla planned to follow the stripped-down Model Y with a similar Model 3.
In China, the new vehicle was expected to come in the second half of 2025, and Tesla was waiting to see the impact of the updated Model Y, which launched earlier this year.
Electrek’s Take
These reports lend weight to what we have been saying for a year now: Tesla’s “more affordable EVs” will essentially be stripped-down versions of the Model Y and Model 3.
While they will enable Tesla to utilize its currently underutilized factories more efficiently, they will also cannibalize its existing Model 3 and Y lineup and significantly reduce its already dwindling gross margins.
I think Musk will sell the move as being good in the long term because it will allow Tesla to deploy more vehicles, which will later generate more revenue through the purchase of the “Full Self-Driving” (FSD) package.
However, that has been his argument for years, and it has yet to pan out as FSD still requires driver supervision and likely will for years to come, resulting in an extremely low take-rate for the $8,000 package.
FTC: We use income earning auto affiliate links.More.