Tesla has seen one of its critical suppliers for its gigacasting technology, TEI, being acquired by General Motors.
Tesla has been pioneering the use of bigger cast parts in its vehicle bodies over the last few years.
It started by replacing 70 rear body parts with 2 giant ones in Model 3 and since then, it has progressed into producing Model Y bodies with just a few parts produced by giant casting machines.
After being skeptical at first, the rest of the industry has started to follow with similar efforts.
Now we learn that GM is also dipping its toes in the space and it is directly affecting Tesla by doing it.
Reuters reports that GM has acquired a Tesla supplier in the space:
For years, a little-known company called Tooling & Equipment International (TEI) has helped Tesla push back the frontiers of “gigacasting”, the process it pioneered to cast large body parts for cars in one piece to save time and money.
Until 2023, that is. TEI is now part of General Motors after agreeing a deal that may have flown under the radar but is a key part of the U.S. automaker’s strategy to make up ground on Tesla, four people familiar with the transaction said.
More specifically, TEI is a specialist in sand casting techniques, which Tesla uses to create its molds for gigacasting.
General Motors acquired Tooling & Equipment International (TEI) to bolster its portfolio of innovations and secure access to unique casting technology.
With new vehicle programs like the Celestiq, the automaker is expected to make use of bigger casting technology.
Tesla and TEI didn’t comment on the report, but Tesla is now believed to be looking for a new partner for sand casting techniques.
The latest casting technology is believed to be critical to Tesla’s next-generation vehicles based on its new “unboxed” manufacturing process.
While it appears the acquisition of the partner by GM is a setback, it’s unclear if it will actually affect the timeline for Tesla’s new vehicle programs.
FTC: We use income earning auto affiliate links.More.
Daimler Truck North America has helped alcohol distributor Reyes Beverage Group deploy fully 29 zero-emission Freightliner eCascadia Class 8 electric semi trucks in its California delivery fleet.
Reyes Beverage Group (RGB) plans to deploy the first twenty Freightliner electric semi trucks at its Golden Brands – East Bay and Harbor Distributing – Huntington Beach warehouses, marking the first phase in the company’s transition to a fully zero emission truck fleet by 2039. An additional nine eCascadia Class 8 HDEVs are scheduled for delivery to RBG’s Gate City Beverage – San Bernardino warehouse before the end of 2024.
RBG’s decision to adopt the Freightliner eCascadia builds on its recent transition to renewable diesel and its ongoing idle-time reduction program. These electric vehicles (EVs) “go electric” will contribute significantly toward the company’s stated goal of reducing its carbon emissions 60 percent by 2030. These 2 trucks will save some 98,000 gallons of diesel fuel annually, and avoid putting nearly 700 metric tons of carbon dioxide and other harmful emissions into California’s air each year.
“We are excited to be among the first in our industry to adopt these electric vehicles,” explains Tom Reyes, President of RBG West. “This is a significant step toward our sustainability goals and ensuring compliance with state regulation as we transition our fleet to EV.”
Freightliner’s eCascadia electric semi trucks offer a number of battery and drive axle configurations with ranges between 155 and 230 miles, depending on the truck specification, to perfectly match customers’ needs without compromising on performance and load capacity. RBG’s Freightliner eCascadia tractors will rely on electric charging stations installed at each facility, allowing them to recharge to 80% capacity in as little as 90 minutes for RGB’s trucks, which feature a typical driving range of 220 miles as equipped.
The Windsor, Ontario utility says it’s driving towards a more sustainable future after adding a dozen new electric vehicles to its fleet – including a state-of-the-art, 55-foot Terex electric bucket truck.
Based on a Class 7 (33,000 lb. GVWR) International eMV Series BEV, the Terex EV takes the eMV’s 291 kWh battery and adds the Terex Optima 55-foot aerial device and HyPower SmartPTO system to create a fully electrified utility service vehicle that can do anything its diesel counterparts can do while offering better, safer working conditions for utility crews.
“We’ve got 12 EVs,” said Gary Rossi, president and CEO, Enwin Utilities. That number represents fully 10% of the utility’s entire vehicle fleet. “Our centerpiece is our electric 55-feet bucket truck. It’s very quiet,” continues Rossi. “So (the truck) allows us, our crews, to communicate better. It’s not as loud in the community when they’re doing repairs in someone’s backyard.”
That notion is echoed by Terex, itself. The company says its HyPower SmartPTO (power take off), which replaces a mechanical PTO, avoids a loud idling engine while reducing workers’ exposure to toxic exhaust fumes.
“It’s all about building Windsor’s future and literally plugging into the battery factory down the road that is being constructed and showing that Windsor is a leader on this front,” says Drew Dilkens, Mayor of Windsor. “I don’t own an internal combustion engine vehicle,” adds Mayor Wilkins. “I only own two electric cars. My wife and I, we made the change starting in 2019 and I can’t see myself ever going back.”
CTV News Windsor
Enwin says its commitment to clean energy extends beyond its vehicle fleet. The company recently unveiled a massive MW solar rooftop net metering facility at its Rhodes Drive headquarters with over 3,000 solar panels. The site, one of Canada’s largest solar installations, generates enough clean electricity to power 300 homes annually.
Built by Damen Shipyards and the first fully electric tugboat to be deployed in the Middle East, the new RSD-E Tug 2513 Bu Tinah put in its record-breaking performance took place at Khalifa Port during ADIPEC, the world’s largest energy conference.
The RSD-E Tug 2513 is based on the already efficient hull design of the standard, diesel-powered RSD Tug 2513, but its new, fully electric propulsion arrangement enables it to offer zero emissions operations in situations where oil or fuel leakage would be – let’s say especially bad.
But, while the “clean” aspect of all-electric operation is obvious, its Guinness World Record of performance shows that the Damen RSD-E Tug 2513 is up to whatever task its owners put to it.
“This Guinness World Record achievement demonstrates that the transition to alternative energy does not come at the cost of performance,” explains Maritime & Shipping Cluster, AD Ports Group, Captain Ammar Mubarak Al Shaiba. “We are very proud that the first electric tug in the Middle East is also making waves on a global level with this accolade and the fact that in parallel it is improving the sustainability of our operations alongside cost efficiencies in terms of overall fuel saving is extremely important. This vessel is now a key component of our Marine Services fleet and our electrification strategy.”
To earn its record, the the Damen RSD-E Tug 2513 Bu Tinah recorded an average high peak bollard pull of 78.2 tonnes (about 86 ‘Murican tons). The record-setting tugboat can undertake a minimum of two towage operation on a single charge, and can be recharged on a marine DC fast charger in just two hours.