Connect with us

Published

on

If there’s one thing I love nearly as much as electric bikes, it’s getting to enjoy some new gear on my rides. With the holidays barreling down on us, there’s still a little bit of time left to bring that joy to an e-bike lover near you! Here are some of the coolest pieces of gear I’ve tested this year that would make great stocking stuffers for anyone who rides an e-bike (or a pedal bike!) in your family or friend group.

Foldylock Forever

I know this is going to be a bold statement, but I think I’ve found the best folding lock in the world. The Forever from Foldylock is a veritable BEAST of a lock. I used to think ABUS was the name to beat for folding locks, but having tried both theirs and Foldylock’s, the Foldylock Forever is definitely top of its class.

Its link joints are so tight that there’s no room to get a tool in anywhere. Its pivot where the lock connects back into its housing actually wraps around 360 for the most freedom when locking, unlike other leading brands that only bend up around 90 degrees. It’s also weirdly quiet. I’m used to the many links in a folding lock resulting in lots of rattling. But the Foldylock Forever has such tight tolerances that it doesn’t move around or rattle. Even the bike holder keeps it secure from moving and making noise.

The only bummer is its a bit short at just 90cm, though the company is apparently going to be releasing a longer version soon, which I’ll probably want to upgrade to.

For just over $100, it’s not even that expensive compared to most high-security bike locks. And ever since I had a $3,000 e-bike stolen, I’ve rethought just how much it’s worth it to buy high quality locks.

Hiplok Z Combo

This one might seem like a strange bike lock, but it’s super handy in a pinch as a quick and dirty low-security option. It’s only a 3 digit combo, which means brute forcing it would only require a maximum of 999 combinations. But that’s really not an issue because someone could literally brute force physically attack it even quicker. A pair of quality garden shears would likely go through it.

So why am I recommending it? Because this isn’t a main lock, but rather just a nice and tiny supplemental lock. At under $25, it’s a fairly cheap sense of light security that barely weighs anything and you’ll forget you even have it with you. It’s basically a security zip-tie.

It’s great for locking your helmet to your bike, or just locking a wheel to the frame if you need to run in somewhere for a minute. Any thief armed with pretty much any type of cutter bigger than a pair of scissors could get through the thin steel strap in the core, but the point is to protect against theft of opportunity attacks – the guy walking down the street and thinks to himself “I’d like that helmet”. A professional thief will be through it in seconds but a random dude on the street is going to mess up his palms trying to rip it apart by hand.

In fact, it’s so small and handy that I keep one strung through the molle loops of my everyday backpack so I always have a quick way to lock something – or anything – always at my fingertips. Even if I just need to lock my bag for a bit while traveling or go full Jason Bourne with incognito flexicuffs, it’s there.

Hover Air X1 drone (flying camera)

Speaking of traveling, I think I’ve found the perfect filming drone for traveling and bike trips. I often travel to other countries for test rides and vacation, and I often debate whether to bring the drones that I use for pro-level filming. Even my DJI Mini drones are still not that small, meaning they take up a decent portion of my backpack. That’s a bummer for someone like me who tries to travel with just a backpack.

But the Hover Air X1 is the smallest drone I’ve found that still gives me good pictures and video. I’ve only been playing with it for a few days so far, and so of course I’ll be back with more on my experience with this flying camera, but it’s been an awesome experience so far. The image quality isn’t quite as good as my DJI drones but to be honest, it’s not that far off. I can definitely use the photos and videos professionally, at least if you can call what I do a profession.

The tracking, hovering, orbiting, and other smart flight paths give me quick little clips of interesting shots, like a spin around my bike shot, and also mean I don’t waste a lot of battery life setting up shots. The battery only lasts around 9 minutes, but I can pop a spare in if I need to. I only have the one battery though, and I’ve found it to be sufficient for grabbing lots of different shots on a charge. And since there’s a USB port on the side, I can top up the charge inside my bag from a portable power bank.

There’s also 32Gb of built-in memory, though around 10 Gb are taken up by the firmware. That still leaves me with lots of space for 2.7k video, which I can download right to my phone and clear up more space on the drone.

One of the reasons I don’t mine the small 9-minute battery is because the drone just doesn’t go very far. I’ll send my DJI drones out a mile or more exploring, but the Hover Air X1 launches from the palm of your hand (literally), does whatever flight you set it for, then returns to your hand.

There’s no controller – though you can buy third-party tiny controllers if you want to fly it manually or fly it from your phone.

Basically, it’s a great way to bring a drone with you traveling or on bike rides when you don’t want the bulk of a bigger piece of equipment but still want to get those higher perspective or third-person photos and video.

XNITO helmet

I’ve tested a lot of helmets over the years, but the XNITO helmet impressed me as one that is quite comfortable while still feeling like it gives me good wraparound protection.

It doesn’t look like a big egg on my head, it doesn’t feel too nerdy and it doesn’t look like I’m qualifying for the olympic cycling team. It just looks like a nice urban helmet, which is what I’m going for.

The quick-release clasp is also great for one handed removal, and it’s hard to go back to a normal two-handed buckle systems when I’m not wearing the XNITO.

The integrated front and rear LED lights are key, and it they’re especially important if you’re on a bike, scooter or skateboard that doesn’t already have integrated lighting. But even on my e-bikes that do have lights, I like knowing I’ve got one more bright red light up high to make me extra visible to distracted car drivers coming up on my six.

The forward-facing light isn’t really bright enough to light up your way like a headlamp, but it’s perfect for being seen. When you roll up to an intersection, drivers will definitely see your bright white spot on top of your forehead.

For $120, I’d have loved to see a MIPS safety lining, but otherwise I’m very happy with this helmet. It looks good, feels good, works well – what’s not to like?!

Electric Bike Company custom helmet

If you want your helmet to be a bit sexier looking, and you like the idea of customizing it however you’d like, you’ll want to check this out. The Electric Bike Company uses the same awesome Customizer program that allows you to create a 100% custom-painted e-bike, but now they’re applying it to helmets as well.

I made a really pretty blue helmet that my wife has since stolen from me. And you can even customize the strap and trim colors. Plus it’s got built-in front and rear LED lights so you’re always visible, even if your bike lights aren’t working.

Even better yet, the helmet is actually super comfortable, so it’s not just one of those good-looking but poor-performing helmets. It feels as good as it looks.

electric bike company model J

Woowind electric bike pump

I’ve used a few electric pumps over the years, but this is one I bought a few months ago to have as a spare and I’ve been super happy with it.

It claims to go up to 120 PSI, though I never run my tires that high so I’ve only used it up to around 40 PSI. But I can confirm that the battery lasts a long time, it feels well made with an aluminum case, and it’s even bright red so it doesn’t get lost in a pile of black bike gear.

I’ve never actually run it empty, but I tend to charge it every ten uses or so and it’s never made me feel like it was about to run out of battery.

It came with a bunch of attachments I’ve since lost, but I only ever use the Schraeder valve anyway so I don’t worry too much about the Presta adapter or the sports-ball tips.

At $42, it’s not cheap. But it’s also infinitely nicer than using a manual hand pump. And as a bonus, its battery lasts long enough that you can use it to top up car and motorcycle tires too!

Cycplus mini electric pump

While the pump above is great for having a larger battery, the Cycplus mini electric pump is incredible for being so tiny. I can literally carry it around in my pocket and forget that it’s there. As an emergency pump to carry on your bike, you’ll never notice the few extra grams and it won’t take up much space in your limited on-bike storage.

It gets quite hot while you use it, but it has a silicone condom thing for it that I assume is there to prevent you from burning your fingers. It also probably helps protect the unit in case you drop it.

The main downsides are that there’s no screen to let you know how much pressure you’re at, and the small pump only has enough battery for two tires. But I can just pinch the tire to get a feel for pressure (this is more of an emergency pump anyway) and two tires is exactly how many tires I have on my bike, so it’s perfect!

It’s a bit pricey at $89. But like many things, the best pump is the one you have with you. And a pump this tiny is easy to bring it along.

Dynaplug tubeless repair tool

Last year I was surprised to see this Dynaplug tool show up in my mailbox. It’s a nifty little repair kit for tubeless tires.

It’s about the size of a space pen, which itself is around half the size of a typical ballpoint pen. Basically, it’s tiny.

The only problem is that I’m not fancy enough to own any tubeless bikes. So I gave it to a lycra friend of mine and forgot all about it. Fast forward nearly a year or so and I received this text message from him recently:

Hey, so a while back you gave me a tire plug in a small stainless steel pen shaped tube. On my way home this evening I’m barreling down the trail, pssssssss, tire sealant goes everywhere…I have one hand stopping the air from coming out of the tire, the other hand reaches to the bottom of my saddle bag, as if placed by an angel from heaven your tire plug contraption falls out as I am fumbling around to see what’s in the bag. I untwist the sucker with my mouth, stab the it into the hole in the tire, pull it out aaand I hear the trees swaying into the wind, the train rattle by and my tire sealed.

I guess it works pretty well.

Topeak Ratchet Stick

The Topeak Ratchet Stick is probably my favorite bike tool of all time.

It doesn’t have every tool in the box, but it has most of the hex driver sizes you’ll need for common tasks (adjusting brakes, saddles, racks, etc.), and then the second plastic holder that snaps onto it carries even more drivers that you probably don’t need as often (mostly the Torx drivers).

To be honest I don’t even know where the second plastic holder with the other drivers is anymore, I’ve probably long since lost it in the bottom of my bike parts bin. That’s how infrequently I need any of those extra bits. The five drivers that fit in the handle are all that I use on a daily basis.

The main part of the tool without the extra bits is a godsend. Not only do you have all of your common drivers in one place, but they fit into a ratchet tool that makes it super easy to install bike parts. Instead of trying to spin an Allen wrench 20 degrees for 100 repetitions until you finally tighten down a bolt, it’s so much easier to use a ratchet. No more pulling off your Allen wrench, resetting it, then turning. The ratchet does it all for you. And the quick direction change lever has you going from tightening to loosening in a second. It’s a bit pricey at $54, but so, so worth it if you are wrenching on your bikes as often as I am.

Smallrig folding tool

I bought this tool specifically to have the smallest collection of common bike tools possible. It’s perfect. It fits into the watch pocket of my jeans so I forget it’s there, but it’s ready in a second when I quickly need a 5mm Allen or a Phillips head screwdriver. I don’t use the Torx bit much, but it’s great to have that Phillips there in addition to the common metric hex sizes.

In fact, it’s not even a bike tool. This is a camera tool meant to be used for adjustments on tripods and other filming equipment. But universality is the whole point of metric bolts, and so whether those bolts are holding a camera quick-release plate or a bike headlight, the tool still works! And it’s just $20, making it a great deal for a tool that puts all of the most common bike drivers in something the size of your thumb.

The big flat thing is mostly for screwing in the 1/4-20 tripod plates used in photography, but I often use it as a pry bar. I’m thinking of filing down the end to make it a bit narrower and work as a smaller flat-head screwdriver as well.

In fact, I love this little thing so much that after I had my first one confiscated by airport security, I went back and bought a second one. Now I just remember not to leave it in my pocket when travelling carry-on.

Redshift Arclight pedals

These are the coolest bicycle pedals I have ever seen in my entire life. Hands down.

They’re also quite expensive, so prepare yourself. But trust me, they’re awesome.

You swap these in place of your existing pedals and then – boom! – you’ve got headlights and tail lights that move with you.

Each pedal has two removable LED lights, one facing forward and one facing backward. But you don’t have to make sure you get the orientation right, since they have some sort of witchcraft in them to automatically tell which way they are facing and light up with the correct color. I’ve tried flipping them quickly to trick them, but they always instantly change color to keep white facing forward and red facing the rear.

Plus there’s a 5th LED module that mounts on your seat post for a standard tail light. It’s wild!

And the fact that the pedal lights are moving in a circle makes them even more obvious to drivers. The only thing that stands out more at night than a bright LED light is a bright LED light in motion.

The set of pedals costs $140, which is not cheap, but then again they’re not just smart lights but also a good set of pedals. For another $40, you can get that fifth module to mount on your seat post.

You can see the pedals and tail light in action below. That bright headlight isn’t part of the kit though –that’s the next light below.

Redshift Arclight pedals and tail light doing their thing

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Manitou and Hangcha commit to heavy equipment battery production JV

Published

on

By

Manitou and Hangcha commit to heavy equipment battery production JV

French equipment manufacturer Manitou has committed to a joint venture with Chinese forklift manufacturer Hangcha that will see the two companies develop and manufacture advanced lithium-ion batteries to support the electrification of the heavy material handler space.

Manitou is well-known in the West, so they need no introduction. Hangcha, though, is arguably just as capable of a company, having opened its first forklift plant in 1956, manufacturing others’ designs under license. They developed their own, in-house material handler in 1974, and have racked up hits ever since. Hangcha is currently the world’s eighth-largest manufacturer of industrial vehicles globally (sounds wrong, but here’s the source).

The plan for the JV is to upgrade the two companies’ deployed fleets of existing lead-acid battery-powered vehicle with longer lasting lithium-ion (li-ion) batteries to expand their operational lifespan. From there, the focus could switch to diesel retrofits and, eventually, the joint development of entirely new products.

“Deepening strategic cooperation with Manitou Group and jointly establishing a lithium battery joint marks a new phase in the partnership between the two sides, which is a milestone in Hangcha global industrial layout,” explains Zhao Limin, Chairman and General Manager of Hangcha Group. “Leveraging Hangcha’s core technological and manufacturing strengths in lithium battery solutions, we will collaboratively enhance solution capability of new energy industrial vehicle power systems. This partnership perfectly aligns with our shared objectives to accelerate electrification transformation and drive sustainable development, while providing robust support to the broader industrial vehicle market.”

Advertisement – scroll for more content

Manitou MHT 12330


MHT 12330 with 72,750 lb. lift capacity; via Manitou.

Once production begins, the joint venture factory will play a key role in supporting Manitou Group’s “LIFT” strategic roadmap. LIFT aims to expand Manitou’s electric vehicle lineup of telehandlers and forklifts, and have EVs account for 28% of total unit forklift sales by 2030. Hangcha Group, meanwhile, has publicly stated its intention to become 100% electric by the end of 2025.

This joint venture plans to recruit employees including engineers, operators, sales representatives and after-sales service technicians. Le Mans Metropole will support the recruitment and local integration and training of future employees.

SOURCE | IMAGES: Manitou; images by Manitou, via Belkorp AG.


If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them. 

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

With another tariff deadline looming, these 10 things are going the right way for stocks

Published

on

By

With another tariff deadline looming, these 10 things are going the right way for stocks

Continue Reading

Environment

These cars are losing value fast — that’s GREAT news for used EV buyers!

Published

on

By

These cars are losing value fast — that's GREAT news for used EV buyers!

New car buyers like to talk about the latest tech and resale value, but most people don’t buy new cars. The used car market is 3x bigger than new, and if you’re content to let the last guy take that big depreciation hit by scoring a great deal on a reliable, low-mile used car you could save thousands on your next EV.

I know what you’re thinking: these posts are always weird because they’re disproportionally impacted by the COVID-era supply chain disruptions, and the obscene dealer mark-ups that came along with them.

But looking into the data shows trends that are much closer to the kind of think you’d expect to see before COVID, with high-end luxury models like S-Class Mercedes that trade on being new and shiny taking massive depreciation hits and more mainstream offerings from brands like Toyota and Honda that trade on economy and reliability holding strong.

That usual luxury brand hit seems like it’s being compounded over at Tesla, where Elon Musk’s highly publicized political leanings have polarized support for the brand, and alienated a huge portion of the market. Demand for new and used Tesla vehicles has plummeted, and iSeeCars reports that the Tesla Model S suffered the biggest percentage price drop of all makes and models over the last twelve months, showing the pioneering electric sedan’s average price in June 2025 at $46,700, nearly 16%, or $8,800 lower than it was 12 just months earlier.

Advertisement – scroll for more content

This isn’t a post about Tesla, though (not intentionally, at least). Instead, it’s about those EVs that have lost the most value since they were first sold new five-ish years ago. So, if you’re looking for a great deal on a pre-loved EV, you could do a lot worse than the list, below, presented in order from biggest “loss” of value.

Top 10 fastest-depreciating EVs


Tesla Model S X Lunar Grey

  Make & Model MSRP Avg. 5 yrs >Difference % Change
1 Audi Q8 e-tron $74,400 $20,958 -$53,442 -71.9%
2 Jaguar I-Pace $72,000 $20,047 -$51,953 -72.2%
3 Tesla Model S $74,990 $27,835 -$47,155 -62.9%
4 Nissan Leaf (SV Plus) $36,190 $13,000 -$23,190 -64.1%
5 Tesla Model X $79,990 $32,940 -$47,050 -58.8%
6 Mercedes EQS $104,400 $41,121 -$63,279 -60.6%
7 Tesla Model Y $44,990 $23,775 -$21,215 -47.2%
8 Hyundai Kona Electric $32,675 $13,860 -$18,815 -57.6%
9 Tesla Model 3 $38,990 $20,950 -$18,040 -46.3%
10 Porsche Taycan $99,400 $48,445 -$50,955 -51.3%
11 Ford Mustang Mach-E $39,995 $21,600 -$18,395 -46.0%

Disclaimer: the models and pricing shown, above, were sourced from CarsDirect, Carscoops, iSeeCars, USNews, and Yahoo!Finance. These deals may not be available in every market, and the standard “with approved credit” fine print should be considered implied. Check with your local dealer(s) for more information.


If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them. 

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending