Connect with us

Published

on

Dec 21 2023 KFF Health News

Living with diabetes, Carlton "PeeWee" Gautney Jr. relied on a digital device about the size of a deck of playing cards to pump insulin into his bloodstream.

The pump, manufactured by device maker Medtronic, connected plastic tubing to an insulin reservoir, which Gautney set to release doses of the vital hormone over the course of the day. Gautney, a motorcycle enthusiast, worked as a dispatcher with the police department in Opp, Alabama.

The 59-year-old died suddenly on May 17, 2020, because — his family believes — the pump malfunctioned and delivered a fatal overdose of insulin.

"There's a big hole left where he was," said Gautney's daughter, Carla Wiggins, who is suing the manufacturer. "A big part of me is missing."

The wrongful-death lawsuit alleges the pump was "defective and unreasonably dangerous." Medtronic has denied the pump caused Gautney's death and filed a court motion for summary judgment, which is pending.

The pump Gautney depended on was among more than 400,000 Medtronic devices recalled, starting in November 2019, after the company said in a recall notice that damage to a retainer ring on the pump could "lead to an over or under delivery of insulin," which could "be life threatening or may result in death."

As the recall played out, federal regulators discovered that Medtronic had delayed acting — and warning patients of possible hazards with the pumps — despite amassing tens of thousands of complaints about the rings, government records show.

Over the past year, KFF Health News has investigated medical device malfunctions including: Artificial knees manufactured by a Gainesville, Florida, company that remained on the market for more than 15 years despite packaging issues that the company said could have caused more than 140,000 of the implants to wear out prematurely. Metal hip implants that snapped in two inside patients who said in lawsuits that they required urgent surgery. Last-resort heart pumps that FDA records state may have caused or contributed to thousands of patient deaths. And even a dental device, used on patients without FDA review, that lawsuits alleged has caused catastrophic harm to teeth and jawbones. CBS News co-reported and aired TV stories about the hip and dental devices.

The investigation has found that most medical devices, including many implants, are now cleared for sale by the FDA without tests for safety or effectiveness. Instead, manufacturers must simply show they have "substantial equivalence" to a product already in the marketplace — an approval process some experts view as vastly overused and fraught with risks.

"Patients believe they are getting an implant that's been proven safe," said Joshua Sharlin, a former FDA official who now is a consultant and expert witness in drug and medical device regulation. "No, it hasn't," Sharlin said.

And once those devices reach the marketplace, the FDA struggles to track malfunctions, including deaths and injuries — while injured patients face legal barriers trying to hold manufacturers accountable for product defects.

In a statement to KFF Health News, the FDA said it "has a scientifically rigorous process to evaluate the safety and effectiveness of medical devices." 'Too little, too late'

The FDA approved the MiniMed 670G insulin pump on Sept. 28, 2016, after its most stringent safety review, a little-used process known as premarket approval.

In a news release that day, Jeffrey Shuren, who directs the FDA's Center for Devices and Radiological Health, lauded the device as a "first-of-its-kind technology" that would give patients "greater freedom to live their lives" and to monitor and dispense insulin as needed. The pump was tested on 123 patients in a clinical trial over several months with "no serious adverse events," the release said. Shuren declined to be interviewed.

The FDA's enthusiasm didn't last. In November 2019, Medtronic, citing the ring problem, launched an "urgent medical device recall" of the pumps, which it expanded in late 2021.

During an inspection at Medtronic's plant in Northridge, California, FDA officials learned the company had logged more than 74,000 ring complaints between 2016 and the November 2019 recall. More than 800 complaints weren't investigated at all, according to the FDA, which sharply criticized the company in a December 2021 warning letter.

Medtronic is facing more than 60 lawsuits filed by injured patients and their families and the company believes it may be hit with claims for damages from thousands more patients, the company disclosed in an August Securities and Exchange Commission filing.

Medtronic pumps that allegedly dispensed too much, or too little, insulin have been blamed for contributing to at least a dozen patient deaths, according to lawsuits filed since 2019. Some cases have been settled under confidential terms, while others are pending or have been dismissed. Medtronic has denied any responsibility in response to the lawsuits.

In one pending case, a Las Vegas man using the pump allegedly fell into an "insulin-induced coma" that led to his death in 2020. In another 2020 case, a 67-year-old New Jersey resident collapsed at her home, dying later the same day at a local hospital.

The recall notice Medtronic sent to a 43-year-old Missouri man's home arrived a few days after police found him dead on his bedroom floor, his family alleged in a lawsuit filed in August. "Simply too little, too late," the suit reads. The case is pending, and Medtronic has yet to file an answer in court.

Medtronic declined to answer written questions from KFF Health News about the pumps and court cases. In an emailed statement, the company said it replaced pump rings with new ones "redesigned to reduce the risk of damage" and "fulfilled all pump replacement requests at no cost to customers."

In April, Medtronic announced that the FDA had lifted the warning letter a few days after it approved a new version of the MiniMed pump system. Shortcut to market

The 1976 federal law that mandated safety testing for high-risk medical devices also created a far easier — and less costly — pathway to the marketplace. This process, known as a 510(k) clearance, requires manufacturers to show a new device they plan to sell has "substantial equivalence" to one already on the market, even if the prior product has been recalled.

Critics have worried for years that the 510(k)-approval scenario is too industry-friendly to protect patients from harm.

In July 2011, an Institute of Medicine report concluded that 510(k) was "not intended to evaluate the safety and effectiveness of medical devices" and said "a move away from the 510(k) clearance process should occur as soon as reasonably possible."

More than a decade later, that hasn't happened, even amid mounting controversy over the clearance of hundreds of devices that employ artificial intelligence.

The FDA now clears about 3,000 low- to moderate-risk devices every year through 510(k) review, which costs the device maker a standard FDA fee of about $22,000. That compares with about 30 approvals a year through the stricter premarketing requirements, which cost nearly $500,000 per device, according to FDA data. Diana Zuckerman, president of the National Center for Health Research, said even many doctors don't realize devices cleared for sale typically have not undergone clinical trials to establish their safety.

"Doctors are shocked to learn this," she said. "Patients aren't going to know it when their doctors don't."

In response to written questions from KFF Health News, the FDA said it "continues to believe in the merits of the 510(k) program and will continue to work to identify program improvements that strengthen the safety and effectiveness of 510(k) cleared devices." The FDA keeps a tight lid on data showing which devices manufacturers choose to demonstrate substantial equivalence — what the agency refers to as "predicate" devices.

"We can't get detailed data," said Sandra Rothenberg, a researcher at the Rochester Institute of Technology. "It's very hard for researchers to determine the basis on which substantial equivalence is being made and to analyze if there are problems."

Rothenberg cited the history of "metal-on-metal" artificial hip implants, which under 510(k) spawned many new brands — along with a disastrous toll of patient injuries. The implants could release metal particles that damaged bone and led to premature removal and replacement, a painful operation. Just four of these hip devices have been the target of more than 25,000 lawsuits seeking damages, court records show. In early 2016, the FDA issued an order requiring safety testing before approving new metal-on-metal hip devices. Alarm bells

Two former Medtronic sales executives in California argue in a whistleblower lawsuit that the 510(k) process can be abused.

According to the whistleblowers, the FDA approved the Puritan Bennett 980, or PB 980, ventilator in 2014 based on the assertion it was substantially equivalent to the PB 840, an earlier mechanical ventilator long viewed as the workhorse of the industry.

Medtronic's subsidiary company Covidien made its claim even though the device has completely different "guts" and operates using software and other "substantially different" mechanisms, according to the whistleblowers' suit.

In response, Medtronic said it "believes the allegations are without merit and has moved to dismiss the case." The case is pending.

The whistleblowers argue the PB 980 ventilator was plagued by dangerous malfunctions for years before its recall in late 2021.

One ventilator billowed smoke in an intensive care unit while the whistleblowers were told by one hospital that "the wheels for the ventilator cart may actually fall off the ventilator during transport," according to the suit.

Batteries could die without warning, kicking off a scramble to keep patients alive; monitor screens froze up repeatedly or otherwise went on the blink; and, in several cases, alarm bells warning of a patient emergency rang continuously and could be quieted only by unplugging the unit from the wall socket and pulling out its batteries, according to the suit.

The December 2021 recall of the PB 980 cited a "manufacturing assembly error" that the company said may cause the ventilator to become "inoperable."

Medtronic said in an email that the ventilator "has helped thousands of patients around the world," including playing a "critical role in the global response to the COVID-19 pandemic." Late warnings

The FDA operates a massive database, called MAUDE, to alert regulators and the public to emerging device dangers. The FDA requires manufacturers to advise the agency when they learn their device may have caused or contributed to a death or serious injury, or malfunctioned in a way that might recur and cause harm. These reports must be submitted within 30 days unless a special exemption is granted.

But FDA officials acknowledge that many serious adverse events go unreported — just how many is anybody's guess.

Since 2010, the FDA has cited companies more than 5,000 times for not handling, reviewing, or investigating complaints properly, or for not reporting adverse events on time. For instance, the FDA cited an Ohio company that made electric beds and other devices more than 15 times for failing to properly scrutinize complaints or report adverse events, including the death of a patient who allegedly became trapped between a bedrail and mattress, agency records show.

In about 10% of reports, more than a year or two elapsed from when a death or serious injury occurred and when the FDA received the reports, a KFF Health News analysis found. That works out to nearly 60,000 delayed reports a year.

Experts and lawmakers say the FDA needs to find a way to detect safety problems quicker.

Sens. Chuck Grassley (R-Iowa) and Elizabeth Warren (D-Mass.) have tried for years to persuade the agency to add unique device identifiers to Medicare payment claim forms to help track products that fail. In an email statement to KFF Health News, Grassley called that a "commonsense step we can take up front to mitigate risk, improve certainty and save money later." Related StoriesStem cell therapy trial shows promise for regenerative treatment of heart failureFetal hormone GDF15 linked to nausea and vomiting in pregnancyIncreased internet use linked to higher anxiety in teens, research shows

The FDA said it is working to "strike the right balance between assuring safety and fostering device innovation and patient access." Yet it noted: "Additional resources are required to establish a fully functioning active surveillance system for medical devices." For now, injured patients suing device companies often cite the volume of adverse event reports to MAUDE, or FDA citations for failing to report them, to bolster claims that the company knew about product malfunctions but failed to correct them.

In one case, a New York man is suing manufacturer Boston Scientific, claiming injuries from a device called the AMS 800 that is used to treat stress urinary incontinence.

Though Boston Scientific says on its website that 200,000 men have been treated successfully, the lawsuit argues complaints piled up in MAUDE year after year and no action was taken — by the company or by regulators.

The number of complaints filed soared from six in 2016 to 2,753 in 2019, according to the suit. By far, the largest category involved incontinence, the condition the device was supposed to fix, according to the suit. Boston Scientific did not respond to a request for comment. The company has filed a motion to dismiss the case, which is pending.

By the FDA's own count, more than 57,000 of some 74,000 complaints Medtronic received about the MiniMed insulin pump's retainer rings were reported to the agency. The FDA said the complaints "were part of the information that led to the compliance actions." The agency said it "approved design and manufacturing changes to the retainer ring to correct this issue" and "has reviewed information confirming the effectiveness of the modification."

"What is the threshold for the FDA to step in and do something?" said Mara Schwartz, who is a nurse, diabetes educator, and pump user. "How many deaths or adverse events does there have to be?"

In 2020, she sued Medtronic, alleging she suffered seizures when the pump mistakenly delivered an overdose of insulin. Medtronic denied her claims, and the case has since been settled under confidential terms.

Private eyes

Some countries don't trust the device industry to play such a key role in oversight.

Australia and about a dozen other nations maintain registries that measure the performance of medical devices against competitors, with an eye toward not paying for care for a substandard device.

That's not likely to happen in the United States, where no device or drug manufacturer must demonstrate its new product is better than what's already for sale.

Product liability lawsuits in the U.S. often cite troubling findings from overseas. For instance, registries in Australia and other countries pinpointed durability problems with the Optetrak knee implants manufactured by Florida device company Exactech years before a major recall. Exactech has declined comment.

The Australian surveillance network also detected deficiencies with the Medtronic PB 980 ventilator, prompting the country's health authority to suspend its use for six months until Medtronic completed training for health care workers and took other steps to improve it, court records show. Medtronic told KFF Health News that it had "worked closely" with the Australian group to resolve the problems. "We take patient safety very seriously and have processes to identify quality issues and determine appropriate actions," Medtronic said.

Registries have gained some traction in America. But so far, they typically have been controlled, and sometimes funded, by industry and medical specialty groups that share their findings only with doctors.

One private registry managed by the Society of Thoracic Surgeons, called Intermacs, tracks death and injury rates at 180 hospitals in the United States certified to implant a mechanical heart pump known as an LVAD. Some patients might find that information helpful, but it's not available to them. 'Exciting features'

While the FDA clears thousands of devices for use based on the "substantial equivalence" premise, manufacturers often tout "new and exciting features" in their advertising and other marketing, said Alexander Everhart, a researcher at the Washington University School of Medicine in St. Louis.

These marketing campaigns have long been controversial, especially when they rely partly on wining and dining surgeons and other medical professionals to gain new business, or when surgeons have financial ties to manufacturers whose products they use. Orthopedic device makers have funneled billions of dollars to surgeons, including fees for consulting, doing medical research, or royalties for their role in fine-tuning surgical tools and techniques, even promoting the products to their peers.

Marketing campaigns directed at prospective patients may receive little scrutiny. The FDA has "limited resources to actively monitor the volume of direct-to-consumer advertising," according to a Government Accountability Office report issued in September. From 2018 to 2022, the FDA took 255 enforcement actions involving advertising claims made for devices, according to the GAO report. Legal barriers

While manufacturers can advertise devices directly to patients, courts may not hold them accountable for communicating possible risks to patients.

Consider the case of Richard Greisberg, a retired electronics business owner in New Jersey. He sued Boston Scientific in 2019, years after having a Greenfield vena cava filter implanted. The device is intended to prevent blood clots that develop in the lower body from traveling into the lungs, which can be deadly.

Greisberg argued that the device had migrated in his body, causing pain and other symptoms and damage that took years to identify. Representing himself in court, he tried to argue that nobody had told him that could happen and that if they had done so he wouldn't have agreed to the procedure.

He lost when the judge cited a legal doctrine called "learned intermediary." The doctrine, which is recognized in many states, holds that manufacturers must warn only physicians, who are presumed to have the knowledge to understand a medical device's risks and relay them to patients.

The court ruled that a 27-page manual the manufacturer sent to the physician who implanted it, which included details about possible risks, was adequate and tossed the case.

Greisberg, 81, felt sucker-punched. "They never gave me any warning about what could happen down the road," he said in an interview. "I never had a chance to have my day in court."

The family of PeeWee Gautney also faces challenges pursuing the insulin pump lawsuit.

Gautney died in a motel room in Destin, Florida, a day after riding his Harley-Davidson to the Panhandle beach town on a weekend jaunt. The MiniMed pump was still strapped to his body, according to a police report.

Medtronic had sent Gautney a form letter in late March 2020, less than two months before he died, advising him to make sure the ring was locking in place correctly. A week later, he wrote back, telling the company: "It's fine right now," court records show.

Wiggins, 33, his daughter, who is also a neonatal respiratory therapist, said she believes a crack in the retainer ring caused it to release too much insulin, which her dad may not have recognized.

"It should never be put on the patient to determine if there is a problem," Wiggins said.

Medtronic has denied the pump failed and caused Gautney's death. The FDA approved the device knowing patients faced the risk of it administering wrong doses, but believed the benefits outweighed these risks, Medtronic argued in a motion for summary judgment in September. The motion is pending.

Medtronic also cited a legal doctrine holding that Congress granted the FDA sole oversight authority over devices receiving premarket approval, which preempts any product defect claims brought under state laws. Manufacturers have drawn on the preemption defense to sidestep liability for patient injuries, and often win dismissal, though federal courts are split in applying the doctrine.

Wiggins hopes to beat those odds, arguing that the December 2021 FDA warning letter reveals that Medtronic violated safety and manufacturing standards.

Her lawyer, Scott Murphy, said that insulin pumps are "really wonderful" devices for people with diabetes when they work right. He argues that the FDA records confirm that Medtronic significantly downplayed its pump's hazards.

"The risks get minimized and the benefits exaggerated," he said.

This article was reprinted from khn.org, a national newsroom that produces in-depth journalism about health issues and is one of the core operating programs at KFF – the independent source for health policy research, polling, and journalism. Source:

KFF Health News

Continue Reading

Environment

Anker SOLIX EverFrost 2 coolers + bundles $200 off, G-Force’s new DE-S cargo e-bike $1,399, EcoFlow DELTA 2 bundle flash sale, more

Published

on

By

Anker SOLIX EverFrost 2 coolers + bundles 0 off, G-Force's new DE-S cargo e-bike ,399, EcoFlow DELTA 2 bundle flash sale, more

We’re starting off this week’s Green Deals with a spotlight on Anker’s SOLIX EverFrost 2 Electric Cooler discounts that are running as part of the brand’s ongoing Mother’s Day Sale, which start from $700. Next, we have G-Force’s extended e-bike savings, including its newest DE-S Premium All-Terrain Fat Tire Wide Cargo e-bike that is down at $1,399. Lastly, there’s EcoFlow’s latest flash sale that is offering a DELTA 2 bundle with an expansion battery and bag for $849, as well as an additional solar panel bundle offer. Plus, all the other hangover Green Deals from last week are in the links at the bottom of the page, rounded together in our Electrified Weekly coverage, including the free extra battery preorder deal on Rad Power’s new RadRunner Max Cargo Utility e-bike and Lectric’s teasing of its upcoming XP 4 e-bike that will be revealed tomorrow, May 6, 2025.

Head below for other New Green Deals we’ve found today and, of course, Electrek’s best EV buying and leasing deals. Also, check out the new Electrek Tesla Shop for the best deals on Tesla accessories.

Save $200 on Anker’s SOLIX EverFrost 2 40L and 58L electric coolers and bundles starting from $700

Looking back in on Anker’s SOLIX Mother’s Day Sale which is continuing through May 11, we wanted to shine a spotlight on the deals for brand’s latest release, the EverFrost 2 Portable Electric Coolers. You’ll find the 40L model discounted to $699.99 shipped here (matching at Amazon), while its 58L counterpart is down at $899.99 shipped (also matching at Amazon), as well as alternate bundles that give you a secondary removable battery below. These two models would normally run you $900 and $1,100 at full price, with these prices only having been beaten out by the February pre-sale launch discounts to $600 and $800 from Anker, while the 58L model saw a drop to $809 from Wellbots. We’ve been seeing these same discounts repeat in recent sales, bringing you another chance at $200 off the going rates for the best post-launch prices we have tracked. Head below for more information on these coolers and their bundle options, or you can get our hands-on take from our review here.

Currently only sporting the two mentioned model sizes (though there is a smaller 23L cooler slated to hit the market later in the year), Anker’s SOLIX EverFrost 2 Electric Coolers see to it that ice runs will no longer be needed during gatherings and other events. There’s currently the 40L model that provides a single compartment with dual functionality and the 58L model that has two compartments – each with dual functionality – that can cover simultaneous cooling and freezing. The big change from its predecessors is the trading of a direct cooling system for the new air-cooled system, providing compartment cooldowns at much faster speeds.

Advertisement – scroll for more content

Both the 40L and 58L models have been given dual battery ports (with the second battery either being sold separately or within bundles that you can find below), which provide up to 104 hours of continuous runtime when set to Eco Mode, according to Anker. Each of these batteries come with a 288Wh capacity and can also be repurposed as power banks when not running the coolers, giving you a little added versatility to keep personal devices juiced up with either the 60W USB-C or 12W USB-A ports. There are four ways to recharge the batteries – with a max 100W solar input, plugging the cooler into a wall outlet or 12V car port, or you can use a USB-C connection directly to the batteries. Both models sport IPX3 water-resistance ratings, as well as large 6-inch wheels for semi-rough terrain and a fold-down tray that is also used as a handle. You can get a full rundown on what to expect in our hands-on review here.

Anker’s SOLIX Mother’s Day EverFrost 2 deals:

If you’re looking to electrify your life with a backup power solution, be sure to browse the power station discounts while the Anker SOLIX Mother’s Day Sale continues through May 11, complete with free gifts that accompany select purchases. We also spotlighted the brand’s deals on its other latest release, the F3800 Plus Portable Power Station that start from $3,199.

G-Force DE-S e-bike

Get serious cargo-hauling power on G-Force’s DE-S premium all-terrain e-bike with 160-mile range for $1,399

Despite G-Force’s Spring Sale e-bike offers slated to end with April, it appears that the brand has extended the savings, giving folks a little more time to score them at these lower prices before rates are raised down the road due to tariffs. Among the continuing deals, the brand’s latest release, the DE-S Premium All-Terrain Fat Tire Wide Cargo e-bike is still being offered at $1,399 shipped. This new model normally carries a $1,799 price tag, with things uncertain as to how high it may rise in the future, with the brand’s previous Spring Sale bringing costs down to this same rate last month. It’s a solid $400 off the going rate while things last, with this being the lowest price we have tracked since the brand came onto our radar.

A serious model with equally serious cargo-hauling capabilities, G-Force’s DE-S e-bike comes with a 750W brushless geared hub motor alongside a waterproof and flame-retardant 45Ah removable battery in order to provide you with 28 MPH top speeds and up to 160 miles of pedal-assisted travel on a single charge. While this bike comes with a cadence sensor, the brand has also equipped it with an additional PAS sensor that allows the rider to control the e-bike’s output power, “eliminating the need for a torque sensor to achieve a smooth riding experience,” according to the brand.

It’s got a solid array of features that make the riding experience all the better, like the smoothed-out cruising thanks to the adjustable front fork suspension paired with the rear suspension system, further bolstered by the fat tires. Alongside these, there’s also hydraulic mineral oil brakes, a 7-speed Shimano derailleur, a 48V LED “ultra bright” headlight, an integrated taillight, an extended rear cargo rack that supports multiple load modes (cargo, passenger, child seat installation, more), hidden cable routing, removable pedals, a telescopic comfort saddle, and a backlit LCD display.

G-Force’s other e-bike deals:

EcoFlow DELTA 2 Portable Power Station

EcoFlow offers flash sale on 2,048Wh LiFePO4 DELTA 2 bundle with an expansion battery and bag at $849 (Today only)

As part of its ongoing Spring-to-Summer sale, EcoFlow has launched another 24-hour flash sale with two offers – one to provide backup power support while the other provides solar support to your power stations. The first of these offers gives you a DELTA 2 Portable Power Station bundled alongside a Smart Extra Battery (expansion battery) and a bag for $849 shipped. The combination of the station and battery would normally cost you $1,798 at full price, which we’ve been seeing in the brand’s direct 2025 sales usually falling to $949. This means that you’re getting the additional travel bag with a further $100 markdown, one of the best prices we have tracked that is also currently matching on Amazon, though, without the bag.

This is quite a solid combination for short-term off-grid power needs, as well as at-home emergency backup. With the inclusion of the extra battery, EcoFlow’s DELTA 2 power station goes from a 1,024Wh to 2,048WH LiFePO4 capacity, which you can further expand to 3,072Wh with another battery connected. It delivers up to 1,800W of steady output through its 15 port options, which surges to 2,200W for larger needs. There’s the usual array of smart controls available through its companion app, as well as the unit coming with an IP68 waterproof construction, knowing that it’ll likely accompany you out into the wilds of the world.

The station’s battery can be recharged in a short time thanks to the fast-charging tech that the brand has given it, letting you refill 80% of its battery in just 50 minutes via a wall outlet, with things taking a little longer at 80 minutes to get it back to full. Of course, there’s also the solar charging capabilities if you have or plan to buy the appropriate panels, with a max 500W input that can recharge the battery in three to six hours, depending on weather conditions.

EcoFlow is also providing the opportunity to grab two of its 110W Solar Panels at $329 shipped while these flash savings last. Outside of this discount, the panels are currently going for $209 each (and regularly run $399), making this is a great chance to score both at about $165 each, giving you the means to recharge the above station’s – or any other model – battery with the sun’s rays.

Be sure to check out the full lineup of deals we’re seeing from EcoFlow’s Spring-to-Summer Sale while they last – which is only a few days longer. You’ll also find some additional coverage of the deals on the brand’s new WAVE 3 AC/Heater and GLACIER electric coolers that are starting from $807.

Best Spring EV deals!

Best new Green Deals landing this week

The savings this week are also continuing to a collection of other markdowns. To the same tune as the offers above, these all help you take a more energy-conscious approach to your routine. Winter means you can lock in even better off-season price cuts on electric tools for the lawn while saving on EVs and tons of other gear.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Rivian CEO posts image of the new Maximus drive unit that will power the upcoming R2 EVs

Published

on

By

Rivian CEO posts image of the new Maximus drive unit that will power the upcoming R2 EVs

Rivian founder and CEO RJ Scaringe just posted a fresh image of a Maximus drive unit—a vital component teased for some time now that will be a key piece in Rivian’s goal to reduce the cost per drive unit in its R2 EV builds.

Rivian continues to show strength during uncertain times in the automotive industry, particularly regarding legacy automakers’ electrification strategies. While threats to EV adoption linger, demand for Rivian’s American-made BEVs has stayed high despite a slight dip in deliveries last quarter.

The company is still riding the success of its first two flagship models—the R1S and R1T, which are now in the second generation. Better still, fans of the brand and EV enthusiasts alike are highly anticipating the arrival of Rivian’s encore to the R1 models, the R2, which will then be followed by a smaller R3 and a rally-like R3X.

As a young automaker, Rivian has overcome hurdles to establish itself in the EV industry, finally achieving scaled production at its Normal, Illinois, facility. Part of that strategy includes consistent innovation and improvement to improve vehicle function and performance for its customers and optimize manufacturing to reduce overall cost.

Advertisement – scroll for more content

An excellent example of that evolution is Rivian’s Enduro drive unit, which was implemented on dual-motor versions of the R1T and R1S. Since then, Rivian has been teasing a new drive unit called Maximus, which we thought may also make its way into R1 builds, but have since learned will debut in the upcoming R2 EVs.

Today, Rivian founder and CEO RJ Scaringe offered a close-up look at Maximus being developed within the R2 design. Check it out:

Rivian R2
The Maximus drive unit / Source: @RJScaringe / Instagram

RJ teases the Maximus drive unit in the Rivian R2

According to RJ Scaringe, the image above is Rivian’s new Maximus drive unit configuration implemented in the R2. There’s not much else of the upcoming BEV to see here, but an exciting little tidbit nonetheless.

While most consumers have been attracted to the Rivian R2’s size and look, Maximus will play a key role in Normal as the American automaker works to reduce the per-unit cost of its drive units—a primary goal it has previously shared with the public.

One key improvement we already know about is Maximus’ stator windings—one of the key components of any electric motor. Previously, Rivian shared that Maximus uses a new continuous winding technique that reduces the total welds per stator and thus the total overall cost of building each one. For comparison, Rivian’s current Enduro drive unit requires 264 stator welds, while Maximus only needs 24.

Rivian has also integrated the front rotor shaft and gear into a single forged, CNC-milled component and reduced the number of required bearings. The result is a simpler, more compact drive unit that is cheaper to build and weighs less, which is excellent news for EV range and efficiency.

With Maximus development underway, Rivian appears to remain on track to officially launch the R2 next year as promised. Be sure to check back with Electrek often for the latest Rivian news about the R2 and beyond.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Sports

NBC’s Tirico left Derby broadcast with nut allergy

Published

on

By

NBC's Tirico left Derby broadcast with nut allergy

NBC Sports host Mike Tirico said Monday he is feeling fine after having to leave the Kentucky Derby broadcast early over the weekend because of a strong reaction to a nut allergy.

“I’ve had a nut allergy my whole life and am usually very, very careful,” Tirico said on the “Today” show. “I ate something that had a nut in it and had a nut allergy, causing your throat and your nose and all that stuff to kind of clog up and swell. It affects your breathing a little bit.”

Tirico said he took an epinephrine shot and was treated by EMTs at Churchill Downs. He began feeling better later Saturday night.

“I’m embarrassed about the attention,” he said.

Ahmed Fareed took over for the 58-year-old broadcaster, who was hosting Derby coverage for the ninth year.

Tirico is set to host the Preakness Stakes on NBC on May 17.

Continue Reading

Trending