Connect with us

Published

on

Tesla is delaying its important Full Self-Driving (FSD) v12 software update, which is supposed to an important step in the automaker’s self-driving program, as it needs more work outside California.

For how many years in a row, I lost count, CEO Elon Musk said that Tesla would achieve self-driving by the end of the year.

Shocker, it looks like it won’t happen this year either.

For the last few months, Musk said that Tesla was preparing to launch its FSD v12 update in December, but it now looks like the update has been delayed.

The Tesla v12 software update is expected to introduce what Musk has been calling “end-to-end neural nets”. The biggest difference with previous updates is that the vehicle’s controls would now be handle by neural nets rather than being coded by programmers.

In short, this means that the vehicle’s behaviors would also be powered by AI rather than only the vision system.

The important update was supposed to be pushed to the fleet earlier this month, but Musk was asked about it on X last night and said that it needs extra testing:

It is already on a lot of cars, but, given that is a completely new architecture, we are doing extra testing. It works very well in California, but needs more training for heavy precipitation areas.

It has been a common concern of FSD Beta testers that the system is much better in California than in other regions, especially right now in the winter in places that get snow.

Musk’s comment that Tesla FSD v12 is already “on a lot of cars” is likely a reference to be in Tesla’s internal employee test fleet, which is significant, but the update apparently has made it to customers.

The CEO previously said that v12 would take “FSD out of Beta” though he didn’t explain what he meant by that.

Tesla still requires FSD drivers to keep their hands on the steering wheel and be ready to take control at all times. The automaker doesn’t take responsibility for accidents on Autopilot or FSD.

Electrek’s Take

I doubt anyone is shocked at another self-driving delay from Tesla at this point.

That said, I believe v12 is getting close to launch. I wouldn’t be surprised if it reaches Tesla customers at some point next month, and definitely before the end of the first quarter 2024.

The bigger question is what it means to be getting off beta? Is Tesla finally going to take responsibility for the system? Is it going to apply to be approved as a level 3 or 4 self-driving system?

The automaker has been silent on that front, which has given me little hope about finally delivering on its long-standing promise to deliver a truly self-driving system.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Tesla (TSLA) obtains ride-hailing permit in California, no robotaxi yet

Published

on

By

Tesla (TSLA) obtains ride-hailing permit in California, no robotaxi yet

Tesla (TSLA) has officially obtained a permit in California to operate an internal fleet for a ride-hailing service, but it’s not for robotaxi yet.

In fact, the automaker hasn’t even applied for an autonomous driving permit yet.

A few weeks ago, it was reported that Tesla had applied for a ride-hailing permit in California.

Even though many linked it to Tesla’s Robotaxi effort, it was specifically for the right to operate an internal fleet of vehicles with drivers to offer a ride-hailing service.

Advertisement – scroll for more content

Tesla had already disclosed that it was offering such a service to its employees in the Bay Area.

Now, the CPUC has confirmed that it has approved Tesla’s application (via Reuters):

The California Public Utilities Commission (CPUC) said it approved Tesla’s application for a transportation charter-party carrier permit (TCP), a license typically associated with chauffeur-operated services, allowing the company to own and control a fleet of vehicles and transport employees on pre-arranged trips.

After Tesla’s stock crashed 5% today, the automaker’s stock went up 1.3% in aftermarket trading on the news.

The speculation is that this is in anticipation of Tesla launching its “robotaxi service”, but a CPUC spokesperson confirmed that the permit doesn’t allow Tesla to do that and that the automaker has yet to apply for a permit that would enable such a service.

Last year, Tesla CEO Elon Musk claimed that Tesla would launch “unsupervised self-driving in Texas and California in Q2 2025.” That’s within the next 4 months.

However, we suspected that this would not be “unsupervised self-driving’ in customer vehicles like Tesla has been promising since 2016, but an internal fleet with teleoperation support in a geo-fenced area for ride-hailing services, much like Waymo has been doing for years.

Sure enough, Musk confirmed last month that this was the plan for Austin in June. We describe this as a “moving of the goal post” for Tesla.

With the focus on Austin in June, Tesla stopped talking about California, which was announced to happen at the same time as Texas last year.

Currently, the prediction market Polymarket puts the odds of Tesla launching robotaxis in California in 2025 at 29%:

Electrek’s Take

As I previously stated, I believe Tesla will use this permit to expand its existing ride-hailing test program in California to non-employees.

It will use that to iron out the ride-hailing system while it continues to work on its self-driving system, which is obviously the hard part to solve.

That said, I wouldn’t be completely shocked if Tesla launched a “robotaxi” in California this year. It just won’t be what Tesla has been promising for years: customer vehicles built since 2016 would be capable of self-driving at a robotaxi-level (4-5 SAE levels).

Instead, it will be an internal fleet with teleoperation support in a geo-fenced area, much like Waymo has been offering in California, Arizona, and Texas for years.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

100+ US-made wind turbines are headed to 2 RWE Texas projects

Published

on

By

100+ US-made wind turbines are headed to 2 RWE Texas projects

GE Vernova is going to supply more than 100 US-made wind turbines to renewables developer RWE for 308 megawatts (MW) of wind projects in west Texas.

RWE is repowering its 127 MW Forest Creek wind farm near Big Spring, Texas, and will kick off construction of the 181 MW Honey Mesquite project in fall 2025. These two projects will deliver 308 MW of clean energy with 109 of GE Vernova’s 2.82 MW wind turbines.

Construction is now officially underway at Forest Creek, bringing some big upgrades that’ll extend the wind farm’s life, which was commissioned in 2006, by another 30 years. The original wind towers, turbines, and other gear are all being decommissioned, and 45 new GE Vernova turbines are each getting fresh foundations. Forest Creek is set to be back online by the end of 2025. RWE is teaming up with Wanzek Construction (part of MasTec Renewables) to recycle or repurpose the old blades, rotors, and nacelles.

Repowering is becoming big business – GE Vernova’s onshore wind business announced in January that it received orders in 2024 to repower over 1 gigawatt (GW) of wind turbines in the US.

Advertisement – scroll for more content

RWE’s new wind farm, Honey Mesquite, in Glasscock County will begin construction later this year and is expected to come online in late 2026.

Together, the two projects will create hundreds of construction jobs and bring in millions in new economic activity to the region. RWE, the US’s third-largest renewables company, says it’s invested $9 billion in Texas since 2007 when Forest Creek first began operations.

Scott Stalica, executive director of North American commercial operations at GE Vernova, said, “These projects are another example of how wind power can support the country’s growing energy needs while creating US jobs and bolstering energy security.”

Texas generates more wind power than any other US state. In 2023, Texas led the US in utility-scale wind-powered electricity generation, producing nearly three-tenths of the country’s total, according to the EIA.


If you live in an area that has frequent natural disaster events, and are interested in making your home more resilient to power outages, consider going solar and adding a battery storage system. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. –trusted affiliate link*

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Dodge Charger EV gets a new ‘Bludicrous’ color and up to $12,500 in discounts

Published

on

By

Dodge Charger EV gets a new 'Bludicrous' color and up to ,500 in discounts

The world’s first electric muscle car, as Dodge calls it, is now arriving at dealerships in a new “Bludicrous” color. Dodge also launched a new virtual experience that lets you create the Charger you’ve been dreaming of right on your phone. To sweeten the deal, Dodge is offering hefty discounts of up to $12,500 on the new Charger Daytona EV.

Dodge launches Charger EV Virtual and big discounts

After the first electric Chargers began arriving at dealerships in January, Dodge introduced a fun, interactive new way for you to create a custom Charger from home.

Since the electric Charger is “loaded with new tech and performance features,” Dodge wants to give you the chance to experience it before you visit the dealership.

The new Dodge Charger Virtual Experience allows you to learn more about the electric muscle car’s performance, technology, design, and more. You can access it by scanning a QR code (shown below).

Advertisement – scroll for more content

You can create your own Dodge Charger Daytona R/T or the 670 horsepower Scat Pack model, choosing from the different colors, interior themes, and package options available. The interactive experience even lets you open and close doors, fold the second-row seats, activate exterior and interior lights, and more.

Dodge-Charger-EV-discounts
Dodge Charger EV in Bludicrous Blue (Source: Stellantis)

The Dodge Charger EV has eight exterior color options, including the new “Bludicrous” blue, which costs an extra $795.

You can choose from After Dark, Destroyer Grey, Diamond Black, Peel Out, Redeye, Triple Nickel, and White Knuckle. Dodge said the new color will also be offered on the upcoming four-door Charger and gas-powered SIXPACK models later this year.

With up to 670 horsepower and 627 lb-ft of torque, the Scat Pack model has “SRT-like performance,” including a 0 to 60 mph sprint in 3.3 seconds. It starts at $73,190.

The Dodge Charger Daytona R/T starts at $59,995 with up to 496 horsepower. If you’re looking for a deal, Dodge launched a $7,500 National Consumer Cash rebate on all 2024 Charger Daytonas.

Dodge Charger Daytona EV trim Horsepower 0 to 60 mph time Starting price
Dodge Charger Daytona R/T 496 hp 4.7 seconds $59,995
Dodge Charger Daytona Scat Pack 670 hp 3.3 seconds $73,190
Dodge Charger EV prices and specs by trim

Combined with a $3,000 National Dodge Performance Days Combo Bonus Cash and a $2,000 conquest cash offer, you can save up to $12,500. Other offers include 0% interest for 72 months and a $3,000 Bonus Cash Allowance or monthly leases as low as $519.

Ready to test out the electric muscle car in real life? We’re here to help you get started. You can use our link to find offers on 2024 and 2025 Dodge Charger EV models at a deal near you.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending