Fireproof battery cells that make their way into electric bike batteries could help address what is seen as a growing concern in the US and around the world: electric bike battery fires.
We’ve covered the increase in such battery fires over the last few years, though it’s important to point out how the problem is much smaller than it would appear in much of the media.
So while the issue should be viewed in proportion, it is nonetheless an issue that requires addressing. And fireproof battery cells may be the solution.
For now, it looks like that solution will be comprised of graphene-powered 18650 battery cells produced with Soteria’s metalized polymer current collectors and Nanotech’s electrolyte, as well as proprietary electrodes.
Voltaplex, a battery pack manufacturer, will then use those cells to produce batteries specifically designed for electric bikes.
Nanotech’s pouch cells and 18650 cells have demonstrated impressive resilience under extreme abuse. A typical Li-ion battery cell will usually erupt in flames after being damaged or punctured. But video tests show Nanotech’s cells being shot with a bullet while remaining inert.
In the demonstration video below, a conventional battery cell on the left shoots flames under the same damage test.
Several different measures are currently underway to improve battery safety in the e-bike industry, including the standardization of safety certification requirements such as UL certification.
However, by using graphene-based battery cells to mitigate fire risk would take safety even further, as even a UL-certified battery pack could still catch fire if abused… such as being shot with a bullet.
Germany’s largest offshore wind farm under construction, EnBW’s He Dreiht, just hit a big milestone: The first enormous turbine is now up in the North Sea.
He Dreiht – which means “it spins” in Low German – is using Vestas’s massive 15 megawatt (MW) turbines, the first project in the world to install them. Just one spin of one of the rotors can generate enough electricity to power four households for an entire day.
When it’s finished, He Dreiht will have 64 mega turbines cranking out 960 megawatts (MW) of clean power – enough to supply around 1.1 million homes. And it’s being built without any government subsidies.
EnBW, one of Germany’s major energy companies, has been working in offshore wind for more than 15 years, but He Dreiht is their biggest project yet. “It will play a key role in helping us to significantly grow our renewable energy output from 6.6 GW to over 10 GW by 2030,” said Michael Class, who heads up EnBW’s generation portfolio development.
Advertisement – scroll for more content
The project is a win for Vestas, too. “With the installation of the first V236-15.0 MW, we have reached an important milestone for both the He Dreiht project and our offshore ramp-up, which helps Germany build a more secure, affordable, and sustainable energy system,” said Nils de Baar, president of Vestas Northern & Central Europe.
He Dreiht is located about 85 kilometers (53 miles) northwest of Borkum and 110 kilometers (68 miles) west of Helgoland. At peak times, more than 500 workers will be out at sea building the farm, using a fleet of more than 60 ships. EnBW’s offshore team in Hamburg is running the show.
The installation process is a major operation. The 64 foundations were already set in the seabed last year. Parts for the turbines are loaded onto the installation vessel Wind Orca in Esbjerg, Denmark, and shipped out in a 12-hour journey to the construction site. From there, the turbines are lifted into place. Meanwhile, crews are also working on internal wind farm cabling.
A partner consortium made up of Allianz Capital Partners, AIP, and Norges Bank Investment Management owns 49.9% of the shares in He Dreiht.
To limit power outages and make your home more resilient, consider going solar with a battery storage system. In order to find a trusted, reliable solar installer near you that offers competitive pricing, check outEnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and you share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get startedhere. –trusted affiliate link*
FTC: We use income earning auto affiliate links.More.
Tesla has released a quick update about its Tesla Semi factory in Nevada. It says that it is on track for volume production of the electric semi truck in 2026.
The Tesla Semi was first scheduled to go into production in 2019, but it has faced numerous delays.
Now, it appears that there is finally some momentum to bring it to volume production.
For the last two years, Tesla has been working to build a new factory next to Gigafactory Nevada, where it builds the battery packs and drive units for most of its electric vehicles built in North America.
Advertisement – scroll for more content
Today, Tesla released a “progress update on the factory, confirming that it finished building and it’s now working on deploying the production lines:
Tesla had previously mentioned aiming for volume production by 2025, but it is now only talking about starting production toward the end of the year and ramping up next year.
The automaker reiterated its planned production capacity of 50,000 units.
They now expect to take deliveries of their first trucks later in 2026 and said that the price has increased “dramatically,” leading them to scale back their pilot program from 42 to 18 Tesla Semi trucks.
When originally unveiling the Tesla Semi in 2017, the automaker mentioned prices of $150,000 for a 300-mile range truck and $180,000 for the 500-mile version. Tesla also took orders for a “Founder’s Series Semi” at $200,000.
However, Tesla didn’t update the prices when launching the “production version” of the truck in late 2022. Price increases have been speculated, but the company has never confirmed them.
FTC: We use income earning auto affiliate links.More.
Vietnamese solar panel maker Boviet Solar just opened the doors to its first US factory — a huge new PV module plant in Greenville, North Carolina.
The company dropped $294 million into the state-of-the-art facility, which will pump out Boviet’s Gamma Series monofacial and Vega Series bifacial solar panels. They’re using advanced PERC and N-Type solar cell tech, which basically means these panels are built to deliver higher efficiency and better performance across residential, commercial, industrial, and utility-scale projects.
The Greenville factory’s first phase is now online with an annual PV module output capacity of 2 gigawatts (GW). For Phase 2, which is scheduled to come online in the second half of 2026, Boviet will invest another $100 million to add 600,000 square feet and ramp up to another 2 GW. It will make high-efficiency solar cells.
Once both phases are complete, Boviet’s campus will cover more than 1 million square feet of manufacturing and R&D space. It’s one of the biggest clean energy manufacturing projects North Carolina has ever seen.
Advertisement – scroll for more content
The jobs impact is significant, too. The first phase will create 460 skilled local jobs. Phase 2 is expected to add another 908, bringing the total to over 1,300 direct jobs, plus nearly 2,000 more indirect jobs across the region. That’s good news for Pitt County’s economy, real estate market, and workforce training programs.
“This facility is not just creating jobs, but creating opportunity, innovation, and a stronger foundation for eastern North Carolina,” said Senator Kandie Smith. Governor Josh Stein added that Boviet Solar’s move shows how North Carolina is leading the way in clean energy growth.
If you’re an electric vehicle owner, charge up your car at home with rooftop solar panels. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing on solar, check outEnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. –ad*
FTC: We use income earning auto affiliate links.More.