Connect with us

Published

on

Earlier this week, Phoenix-based e-bike maker Lectric Ebikes surprised the industry with the unveiling of a high-end yet low-cost electric bike. The $1,999 Lectric ONE e-bike, which includes components like a Pinion automatic shifting gearbox normally found on models approaching five figures, resulted in a flood of questions. To get to the bottom of the most pressing concerns, we sat down with Lectric’s CEO Levi Conlow to discuss the decisions made in designing and producing the new e-bike.

Question 1: Why does the Lectric ONE use a cadence sensor instead of a torque sensor?

When testing the Lectric ONE with both cadence and torque sensors, we didn’t really feel like the torque sensor added very much to the experience, and would end up costing the consumer a lot more. We spent a lot of time dialing in the power delivery on this bike with PWR so that the experience comes shockingly close to the experience with a torque sensor. There are several settings users can adjust to dial in the way power gets delivered on this bike.

For reference, PWR is Lectric’s own design for more natural feeling pedal assist. Compared to most low-cost electric bikes that feel jumpier and tend to lurch forward when riders begin to pedal, Lectric uses a less common current-based pedal assist system that results in a smoother and more natural feeling ride. Having tested it many times, I can personally say that it still doesn’t feel as responsive as a true torque sensor, but it’s miles more natural feeling than the cheap cadence sensor and speed-based programming on most other e-bikes in this category.

lectric one e-bike

Question 2: Why didn’t you guys include a suspension fork on the Lectric ONE?

We wanted the Lectric ONE to be as light as possible to maximize ease of use for our riders. At 55 pounds, and with a 750w motor, the ONE is light enough to carry up to an apartment and powerful enough to rocket up to 28 mph for a quick, sweat-free commute.

This answer actually surprised me a bit. Sure, it definitely saves weight. But it seems like the Lectric ONE, with its much more sophisticated pedal drivetrain thanks to that Pinion electric-shifting automatic gearbox, is more of a cyclists’ e-bike. That means it is likely going to attract folks who already like to ride a pedal bike and are already bike commuters. Many (if not most) commuter bikes already lack suspension, allowing them to be more robust and longer lasting, not to mention lighter. So while the Lectric ONE is definitely lighter without a suspension fork, I imagine many of the people considering it are already frequent cyclists and likely have gotten used to common rigid bikes.

Question 3: Why the small (20-inch) wheel size on the Lectric ONE?

Putting smaller wheels on the Lectric ONE serves two primary purposes: Number one, weight savings. There really aren’t any advantages to having a commuter bike with a larger wheel diameter, and it adds weight and makes transport bulky. With 20-inch wheels and a foldable stem the ONE can be transported with ease. Number 2, acceleration is vastly improved with smaller diameter tires. It’s hard to put into words just how fast this bike gets moving from a standstill. Being able to accelerate fast adds to the joy of commuting by bike, gets you to your destination faster, and improves safety by enabling riders to maneuver quickly out of potentially dangerous situations.

I know there are some large-diameter wheel purists out there, but I personally agree about the benefits of 20″ wheels. Where I live, probably 80-90% of the commuter bikes seen on the streets and bike lanes are 20″ wheel bikes. It’s just more common around here. Large diameters have their advantages, but in commuting roles, they tend to be more than necessary.

lectric one e-bike

Question 4: Is the Lectric ONE UL compliant? Does that mean Lectric does its own UL testing?

The Lectric ONE is certified to UL 2849 by SGS, a Nationally Recognized Testing Laboratory. SGS is one of the leading global testing, inspection, and certification companies with over 99,600 employees operating a network of 2,600 offices and laboratories around the world.

This is quite common. Underwriter Laboratories is divided into non-profit and for-profit sides, with the former setting the standard and the latter offering its services to test and certify to that standard. While some companies do go straight to UL for their testing, others turn to various laboratories that have received international approval to certify to UL standards.

lectric one e-bike

Question 5: This is a very different type of e-bike than you’ve ever made before. What type of rider does the Lectric ONE target?

The Lectric ONE is a commuting e-bike. With this product we are aiming to get people on a bike that can actually replace car miles. The almost maintenance-free drivetrain and semi-automatic shifting make this product as reliable as a car so you don’t even have to think as you’re riding. This product is also for folks who want to see the most cutting-edge technology the e-bike industry has to offer. Lectric’s scale has enabled us to bring many advanced features to a price point that is actually reachable.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Delhi-ghtful! India mulls 2035 ICE ban, blocks fuel sales to older vehicles

Published

on

By

Delhi-ghtful! India mulls 2035 ICE ban, blocks fuel sales to older vehicles

In a bold bid to combat the crippling air pollution crisis in its capital, Delhi, Indian lawmakers have begun high-level discussions about a plan to phase out gas and diesel combustion vehicles by 2035 – a move that could cause a seismic shift in the global EV space and provide a cleaner, greener future for India’s capital.

Long considered one of the world’s most polluted capital cities, Indian capital Delhi is taking drastic steps to cut back pollution with a gas and diesel engine ban coming soon – but they want results faster than that. As such, Delhi is starting with a city-wide ban on refueling vehicles more than 15 years old, and it went into effect earlier this week. (!)

“We are installing gadgets at petrol pumps which will identify vehicles older than 15 years, and no fuel will be provided to them,” said Delhi Environment Minister Manjinder Singh Sirsa … but they’re not stopping there. “Additionally, we will intensify scrutiny of heavy vehicles entering Delhi to ensure they meet prescribed environmental standards before being allowed entry.”

Making it prohibitively difficult for Dehli’s residents to own and operate older, presumably more polluting vehicles is one way to reduce harmful emissions and air pollution, but Sirsa’s team isn’t just targeting newer vehicles. They’re also planning to deploy more than 900 electric transit buses, part of a larger plan to replace 5,000 of the city’s 7,500 total bus with lower- or zero-emission options this year alone.

Advertisement – scroll for more content

The Economic Times is reporting that discussions are underway to pass laws requiring that all future bus purchases will be required to be electric or “clean fuel” (read: CNG or hydrogen) by the end of this year, with a gas/diesel ban on “three-wheelers and light goods vehicles,” (commercial tuk-tuks and delivery mopeds) potentially coming 2026 to 2027 and a similar ban privately owned and operated cars and bikes coming “between 2030 and 2035.”

Electrek’s Take

2025 Xpeng G6 all-electric SUV with 5C ultra-fast charging “AI batteries” launched in China
Xpeng EV with Turing AI and Bulletproof battery; via XPeng.

After a Chinese government study linked air pollution caused by automotive exhausts and coal-fired power plants to more than 1.1 million deaths per year in 2013, the nation’s government took serious action, shuttering older coal plants and imposing strict emissions standards. The country also incentivized EV adoption through license-plate lotteries favoring electric cars and a nationwide EV mandate set to kick in by 2030.

The results were astounding, and the technological innovations that have come from an entire nation of talented engineers all “pulling in the same direction” have put the West to shame, with Western auto executives repeatedly sounding the alarm and lobbying for tariffs and other protectionist policies on both sides of the Atlantic.

To see India make move towards a gas and diesel ban like this, and on such an aggressive timeline, can only mean that they’ve been paying attention … and America is about to fall even further behind.

SOURCE: India Times; featured image by Sumita Roy Dutta.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Parker launches Mobile Electrification Technology Center training program

Published

on

By

Parker launches Mobile Electrification Technology Center training program

Last week, Parker Hannifin launched what they’re calling the industry’s first certified Mobile Electrification Technology Center to train mobile equipment technicians make the transition from conventional diesel engines to modern electric motors.

The electrification of mobile equipment is opening new doors for construction and engineering companies working in indoor, environmentally sensitive, or noise-regulated urban environments – but it also poses a new set of challenges that, while they mirror some of the challenges internal combustion faced a century ago, aren’t yet fully solved. These go beyond just getting energy to the equipment assets’ batteries, and include the integration of hydraulic implements, electronic controls, and the myriad of upfit accessories that have been developed over the last five decades to operate on 12V power.

At the same time, manufacturers and dealers have to ensure the safety of their technicians, which includes providing comprehensive training on the intricacies of high-voltage electric vehicle repair and maintenance – and that’s where Parker’s new mobile equipment training program comes in, helping to accelerate the shift to EVs.

“We are excited to partner with these outstanding distributors at a higher level. Their commitment to designing innovative mobile electrification systems aligns perfectly with our vision to empower machine manufacturers in reducing their environmental footprint while enhancing operational efficiency,” explains Mark Schoessler, VP of sales for Parker’s Motion Systems Group. “Their expertise in designing mobile electrification systems and their capability to deliver integrated solutions will help to maximize the impact of Parker’s expanding METC network.”

Advertisement – scroll for more content

The manufacturing equipment experts at Nott Company were among the first to go through the Parker Hannifin training program, certifying their technicians on Parker’s electric motors, drives, coolers, controllers and control systems.

“We are proud to be recognized for our unwavering dedication to advancing mobile electrification technologies and delivering cutting-edge solutions,” says Nott CEO, Markus Rauchhaus. “This milestone would not have been possible without our incredible partners, customers and the team at Nott Company.”

In addition to Nott, two other North American distributors (Depatie Fluid Power in Portage, Michigan, and Hydradyne in Fort Worth, Texas) have completed the Parker certification.

Electrek’s Take

electric bobcat track loader
T7X all-electric track loader at CES 2022; via Doosan Bobcat.

With the rise of electric equipment assets like Bobcat’s T7X compact track loader and E10e electric excavator that eliminate traditional hydraulics and rely on high-voltage battery systems, specialized electrical systems training is becoming increasingly important. Seasoned, steady hands with decades of diesel and hydraulic systems experience are obsolete, and they’ll need to learn new skills to stay relevant.

Certification programs like Parker’s are working to bridge that skills gap, equipping technicians with the skills to maximize performance while mitigating risks associated with high-voltage systems. Here’s hoping more of these start popping up sooner than later.

SOURCE | IMAGES: Parker Hannifin.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

ReVolt extended range electric semi trucks score their first customer

Published

on

By

ReVolt extended range electric semi trucks score their first customer

Based on a Peterbilt 579 commercial semi truck, the ReVolt EREV hybrid electric semi truck promises 40% better fuel economy and more than twice the torque of a conventional, diesel-powered semi. The concept has promise – and now, it has customers.

Austin, Texas-based ReVolt Motors scored its first win with specialist carrier Page Trucking, who’s rolling the dice on five of the Peterbilt 579-based hybrid big rigs — with another order for 15 more of the modified Petes waiting in the wings if the initial five work out.

The deal will see ReVolt’s “dual-power system” put to the test in real-world conditions, pairing its e-axles’ battery-electric torque with up to 1,200 miles of diesel-extended range.

ReVolt Motors team

ReVolt Motors team; via ReVolt.

The ReVolt team starts off with a Peterbilt, then removes the transmission and drive axle, replacing them with a large genhead and batteries. As the big Pete’s diesel engine runs (that’s right, kids – the engine stays in place), it creates electrical energy that’s stored in the trucks’ batteries. Those electrons then flow to the truck’s 670 hp e-axles, putting down a massive, 3500 lb-ft of Earth-moving torque to the ground at 0 rpm.

Advertisement – scroll for more content

The result is an electrically-driven semi truck that works like a big BMW i3 or other EREV, and packs enough battery capacity to operate as a ZEV (sorry, ZET) in ports and urban clean zones. And, more importantly, allows over-the-road drivers to hotel for up to 34 hours without idling the engine or requiring a grid connection.

That ability to “hotel” in the cab is incredibly important, especially as the national shortage of semi truck parking continues to worsen and the number of goods shipped across America’s roads continues to increase.

And, because the ReVolt trucks can hotel without the noise and emissions of diesel or the loss of range of pure electric, they can immediately “plug in” to existing long-haul routes without the need to wait for a commercial truck charging infrastructure to materialize.

“Drivers should not have to choose between losing their longtime routes because of changing regulatory environments or losing the truck in which they have already made significant investments,” explains Gus Gardner, ReVolt founder and CEO. “American truckers want their trucks to reflect their identity, and our retrofit technology allows them to continue driving the trucks they love while still making a living.”

If all of that sounds familiar, it’s probably because you’ve heard of Hyliion.

Hyliion electric semi truck

Hyliion Hypertruck ERX; via Hyliion.

Before it changed its focus to develop Carnot-cycle generators and gensets, Austin-based Hyliion built a number of EREV Peterbilts using the then-new 15L Cummins diesel as a generator and employing the same sort of battery and e-axle-arrangement as ReVolt.

In addition to being located in the same town and employing the same idea in the same Peterbilt 579 tractor, ReVolt even employs some of the same key players as Hyliion: both the company’s CTO, Chandra Patil, and its Director of Engineering, Blake Witchie, previously worked at Hyliion’s truck works.

Still, Hyliion made their choice when they shut down their truck business. ReVolt seems to have picked up the ball – and their first customer is eager to run with it.

“Our industry is undergoing a major transition, and fleet owners need practical solutions that make financial sense while reducing our environmental impact,” said Dan Titus, CEO of Page Trucking. “ReVolt’s hybrid drivetrain lowers our fuel costs, providing our drivers with a powerful and efficient truck, all without the need for expensive charging infrastructure or worrying about state compliance mandates. The reduced emissions also enable our customers to reduce their Scope 2 emissions.”

Page Trucking has a fleet of approximately 500 trucks in service, serving the agriculture, hazardous materials, and bulk commodities industries throughout Texas. And, if ReVolt’s EREV semis live up to their promise, expect them to operate a lot more than 20 of ’em.

SOURCES | IMAGES: ReVolt; via Power Progress, TTNews.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending