Jackery’s new Explorer 1000 v2 Portable Power Station now available for pre-order at $679
Jackery has launched an early bird pre-order deal on its new Explorer 1000 v2 Portable Power Station for $679 shipped, after using the on-page code E1000V2 at checkout for $120 off. This is the very first opportunity to save on this newly upgraded power station before it begins shipping out next month, giving you until May 31 to lock down your very own ahead of summer. Its predecessor, the standard Explorer 1000, has regularly been discounted between $640 and $650 during most major sales we’ve seen since the new year began, meaning for the same general price you’ll be able to get this updated model instead of settling for its older version.
The new Explorer 1000 v2 arrives upgraded from its standard NMC lithium battery to a LiFePO4 battery for greater efficiency and better operations at lower levels of charge. It’s been given a slight bump up from a 1,002Wh capacity to a 1,070Wh of capacity, with its power output being raised as well from 1,000W to 1,500W. Charging times are also more significantly improved, with what used to take 7.5 hours through a 180W max solar input now only taking 3 hours with a 600W solar input or 1.6 hours via a wall outlet (as well as 12-hour charging through a car port). It features the next generation of Chargeshield 2.0 that provides a whopping 62 forms of all-round protection, so don’t worry about accidental surges from storms, sudden outages, etc. It also has seven output ports for your charging needs: three ACs, two USB-Cs, one USB-A, and one car port.
And if you were just thinking to yourself, “I wish there was a way to grab this model with a solar panel,” you’re in luck – cause Jackery also is giving you the first chance to save on the Explorer 1000 v2 Solar Generator bundle for $899 shipped, down from $1,299, after using the on-page code SG1000V2 at checkout for $400 off. The regular Explorer 1000’s bundle gives you two 100W solar panels (whereas the new Explorer 1000 v2 bundle simplifies it into one 200W panel) and is currently marked down to $1,099, meaning this pre-order deal gives you far more for even less – but keep in mind it also only lasts until May 31, so don’t dawdle too long on making a decision.
As part of its early Memorial Day sales, Amazon is taking up to 50% off a large collection of Greenworks mowers, blowers, trimmers, pressure washers, chainsaws, pole saws, bundles, and more. A standout amongst the bunch is the 24V 6-inch Cordless Electric Mini Chainsaw for $99.97 shipped. Regularly fetching $160, this tool has only seen three discounts since the start of the new year, with the first two keeping at $136, while last month we saw it fall to the $100 low. Today’s deal is a slightly bigger 38% markdown off the going rate that lands it at a new all-time low with only a few cents of difference. We’ve also curated a list of our other top picks in this sale below.
This 6-inch mini chainsaw is an ideal addition for travelers and homeowners alike, equipped with a brushless motor and 2.0Ah battery that is able to make up to 100 cuts on a single charge and fully recharges in up to an hour. Plus, as is common with the brand, the battery can be interchanged with over 125 other devices and tools within the Greenworks ecosystem for more convenient power needs. Its compact design allows it to better fit in tight spaces than any standard chainsaw and it lessens arm fatigue at just 3 pounds. And with its multiple, built-in safety features, like the anti-splash baffle or the safety lock, you’re ensured a much more controlled experience whether it’s for garden or tree pruning, home DIY projects, cutting up firewood, or more.
Other notable Greenworks Memorial Day discounts:
Notable Greenworks Memorial Day bundle discounts:
NIU KQi3 Pro Foldable Electric Kick Scooter hits $600 for today only
As part of its Deals of the Day, Best Buy is offering the NIU KQi3 Pro Foldable Electric Kick Scooter for $599.99 shipped. Usually fetching $799, this model has seen very few discounts since the new year began, with its successor, the KQi3 Max often receiving discounts over it. We’ve seen it go for as low as $599 in the past, meaning today’s deal gives you the second-lowest price we have tracked at just $1 above the all-time low from Black Friday sales. Regardless, it’s still a great opportunity to snag this commuting option at its lowest prices – but don’t forget, the deal only lasts until the end of the day.
The NIU KQi3 Pro offers an affordable, longer-than-normal-commuting solution of 31 miles on a single charge at 20 MPH top speeds, matching or coming near many popular e-bike models that go for more. It sports a 350W rear drive motor and a 48V battery that can handle 20% inclines together, as well as wider 21-inch handlebars and 9.5-inch rubber pneumatic tires. Its triple braking system gives you superior stopping power, with braking lights on its backside and a bright Halo headlight for evening or night time cruises, ensuring a safer journey. You’ll also get complete smart controls through the NIU app, letting you monitor or adjust settings, but more importantly it allows for the scooter to be locked for added security. You can also find the upgraded KQi3 Max model on sale as well for $750, down from $1,000.
As a cheaper option for those with a shorter travel distance or perhaps for your teens to start off with, Best Buy is also offering a one-day discount on the GoTrax FLEX VOYAGER Electric Scooter for $370, down from $600. You’re looking at a much more simplified sit-down option here, with a 15.5 MPH top speed for up to 19 miles on a single charge with its 350W motor and 36V battery. Its cushioned seat, working alongside the 14-inch shock-absorbing pneumatic tires and its rear suspension, will ensure a much smoother ride as opposed to other basic standing models. You’ll also get an integrated storage basket for errand running – or perhaps for your kids to ride to school or to a friend’s house.
The savings this week are also continuing to a collection of other markdowns. To the same tune as the offers above, these all help you take a more energy-conscious approach to your routine. Winter means you can lock in even better off-season price cuts on electric tools for the lawn while saving on EVs and tons of other gear.
In a bold bid to combat the crippling air pollution crisis in its capital, Delhi, Indian lawmakers have begun high-level discussions about a plan to phase out gas and diesel combustion vehicles by 2035 – a move that could cause a seismic shift in the global EV space and provide a cleaner, greener future for India’s capital.
Long considered one of the world’s most polluted capital cities, Indian capital Delhi is taking drastic steps to cut back pollution with a gas and diesel engine ban coming soon – but they want results faster than that. As such, Delhi is starting with a city-wide ban on refueling vehicles more than 15 years old, and it went into effect earlier this week. (!)
“We are installing gadgets at petrol pumps which will identify vehicles older than 15 years, and no fuel will be provided to them,” said Delhi Environment Minister Manjinder Singh Sirsa … but they’re not stopping there. “Additionally, we will intensify scrutiny of heavy vehicles entering Delhi to ensure they meet prescribed environmental standards before being allowed entry.”
The Economic Times is reporting that discussions are underway to pass laws requiring that all future bus purchases will be required to be electric or “clean fuel” (read: CNG or hydrogen) by the end of this year, with a gas/diesel ban on “three-wheelers and light goods vehicles,” (commercial tuk-tuks and delivery mopeds) potentially coming 2026 to 2027 and a similar ban privately owned and operated cars and bikes coming “between 2030 and 2035.”
Electrek’s Take
Xpeng EV with Turing AI and Bulletproof battery; via XPeng.
Last week, Parker Hannifin launched what they’re calling the industry’s first certified Mobile Electrification Technology Center to train mobile equipment technicians make the transition from conventional diesel engines to modern electric motors.
The electrification of mobile equipment is opening new doors for construction and engineering companies working in indoor, environmentally sensitive, or noise-regulated urban environments – but it also poses a new set of challenges that, while they mirror some of the challenges internal combustion faced a century ago, aren’t yet fully solved. These go beyond just getting energy to the equipment assets’ batteries, and include the integration of hydraulic implements, electronic controls, and the myriad of upfit accessories that have been developed over the last five decades to operate on 12V power.
At the same time, manufacturers and dealers have to ensure the safety of their technicians, which includes providing comprehensive training on the intricacies of high-voltage electric vehicle repair and maintenance – and that’s where Parker’s new mobile equipment training program comes in, helping to accelerate the shift to EVs.
“We are excited to partner with these outstanding distributors at a higher level. Their commitment to designing innovative mobile electrification systems aligns perfectly with our vision to empower machine manufacturers in reducing their environmental footprint while enhancing operational efficiency,” explains Mark Schoessler, VP of sales for Parker’s Motion Systems Group. “Their expertise in designing mobile electrification systems and their capability to deliver integrated solutions will help to maximize the impact of Parker’s expanding METC network.”
Advertisement – scroll for more content
The manufacturing equipment experts at Nott Company were among the first to go through the Parker Hannifin training program, certifying their technicians on Parker’s electric motors, drives, coolers, controllers and control systems.
“We are proud to be recognized for our unwavering dedication to advancing mobile electrification technologies and delivering cutting-edge solutions,” says Nott CEO, Markus Rauchhaus. “This milestone would not have been possible without our incredible partners, customers and the team at Nott Company.”
In addition to Nott, two other North American distributors (Depatie Fluid Power in Portage, Michigan, and Hydradyne in Fort Worth, Texas) have completed the Parker certification.
Electrek’s Take
T7X all-electric track loader at CES 2022; via Doosan Bobcat.
With the rise of electric equipment assets like Bobcat’s T7X compact track loader and E10e electric excavator that eliminate traditional hydraulics and rely on high-voltage battery systems, specialized electrical systems training is becoming increasingly important. Seasoned, steady hands with decades of diesel and hydraulic systems experience are obsolete, and they’ll need to learn new skills to stay relevant.
Certification programs like Parker’s are working to bridge that skills gap, equipping technicians with the skills to maximize performance while mitigating risks associated with high-voltage systems. Here’s hoping more of these start popping up sooner than later.
Based on a Peterbilt 579 commercial semi truck, the ReVolt EREV hybrid electric semi truck promises 40% better fuel economy and more than twice the torque of a conventional, diesel-powered semi. The concept has promise – and now, it has customers.
Austin, Texas-based ReVolt Motors scored its first win with specialist carrier Page Trucking, who’s rolling the dice on five of the Peterbilt 579-based hybrid big rigs — with another order for 15 more of the modified Petes waiting in the wings if the initial five work out.
The deal will see ReVolt’s “dual-power system” put to the test in real-world conditions, pairing its e-axles’ battery-electric torque with up to 1,200 miles of diesel-extended range.
ReVolt Motors team
ReVolt Motors team; via ReVolt.
The ReVolt team starts off with a Peterbilt, then removes the transmission and drive axle, replacing them with a large genhead and batteries. As the big Pete’s diesel engine runs (that’s right, kids – the engine stays in place), it creates electrical energy that’s stored in the trucks’ batteries. Those electrons then flow to the truck’s 670 hp e-axles, putting down a massive, 3500 lb-ft of Earth-moving torque to the ground at 0 rpm.
Advertisement – scroll for more content
The result is an electrically-driven semi truck that works like a big BMW i3 or other EREV, and packs enough battery capacity to operate as a ZEV (sorry, ZET) in ports and urban clean zones. And, more importantly, allows over-the-road drivers to hotel for up to 34 hours without idling the engine or requiring a grid connection.
That ability to “hotel” in the cab is incredibly important, especially as the national shortage of semi truck parking continues to worsen and the number of goods shipped across America’s roads continues to increase.
And, because the ReVolt trucks can hotel without the noise and emissions of diesel or the loss of range of pure electric, they can immediately “plug in” to existing long-haul routes without the need to wait for a commercial truck charging infrastructure to materialize.
“Drivers should not have to choose between losing their longtime routes because of changing regulatory environments or losing the truck in which they have already made significant investments,” explains Gus Gardner, ReVolt founder and CEO. “American truckers want their trucks to reflect their identity, and our retrofit technology allows them to continue driving the trucks they love while still making a living.”
If all of that sounds familiar, it’s probably because you’ve heard of Hyliion.
In addition to being located in the same town and employing the same idea in the same Peterbilt 579 tractor, ReVolt even employs some of the same key players as Hyliion: both the company’s CTO, Chandra Patil, and its Director of Engineering, Blake Witchie, previously worked at Hyliion’s truck works.
Still, Hyliion made their choice when they shut down their truck business. ReVolt seems to have picked up the ball – and their first customer is eager to run with it.
“Our industry is undergoing a major transition, and fleet owners need practical solutions that make financial sense while reducing our environmental impact,” said Dan Titus, CEO of Page Trucking. “ReVolt’s hybrid drivetrain lowers our fuel costs, providing our drivers with a powerful and efficient truck, all without the need for expensive charging infrastructure or worrying about state compliance mandates. The reduced emissions also enable our customers to reduce their Scope 2 emissions.”
Page Trucking has a fleet of approximately 500 trucks in service, serving the agriculture, hazardous materials, and bulk commodities industries throughout Texas. And, if ReVolt’s EREV semis live up to their promise, expect them to operate a lot more than 20 of ’em.