The threat of EV tariffs between Europe and China continues to loom and is heating up. The EU has reportedly delayed sharing its decision on implementing fees on Chinese EV imports to avoid the topic during its current Parliament campaign phase.
Tariffs surrounding EVs have been an ongoing saga in the global marketplace for the past six months or so, as regions like the US and EU have grown weary of the ongoing “threat” Chinese-made EVs present as genuine competition.
Bolstered by government subsidies and an earlier commitment to electrification, China, in many ways, continues to lead the world in EV innovation and development, bringing the most affordable models to market overseas.
In recent years, Chinese automakers like NIO, XPeng, and BYD have expanded outside of Asia into other large markets like Europe, catching the attention of local automakers who have admittedly been slower to develop and launch quality BEVs.
As a result, the EU implemented a probe into the Chinese automakers that the European Commission believes have been “unfairly” subsidized as exports into the region by the boatload. To combat this alleged advantage, Europe has threatened tariffs on imports of EVs built in China.
Meanwhile, in the US, the Biden administration took action before any Chinese EVs even entered its market, raising tariffs on goods originating from China, including solar panels, batteries, medical supplies, and EVs, from 25% to 100%.
Feeling the heat from the US and a looming threat of EV tariffs in the EU, China has threatened its own fees on vehicle imports from both regions and has demanded the EU Commission share the results of its probe and its decision on whether or not to impose said tariffs.
That decision was due publicly on June 5, but new reports state the EU is now keeping those details close to its chest a tad longer so the hot topic does not distract voters in the upcoming Parliament elections.
China calls for end of EV probe as EU mulls tariff decision
Per a recent report by Reuters, the European Commission has delayed its decision on whether or not to impose tariffs on Chinese EVs until after its upcoming Parliament election on June 6-9. That said, a spokesperson for the European Commission said the decision date (possibly June 10) has yet to be confirmed.
Either way, China will have to wait at least five extra days to learn the fate of its place in the EU automotive market, and it is not pleased. China has urged the EU Commission to nix the EV subsidy probe altogether, describing the investigation as “unreasonable” and a stray from international rules.
In addition to its focus on Parliament campaigns, the European Commission continues to argue that three Chinese EV automakers still need to supply adequate information to the anti-subsidy probe, offering potential reasoning for further delays in sharing its results.
The investigation began on October 4, 2023, and can last as long as 13 months. The EU Commission has the power to impose (provisional) anti-subsidy repercussions up to nine months after the start of the probe. So, in theory, we may not hear the EU’s findings or its decision on whether or not to impose EV tariffs until July 4, 2024.
The saga continues. Check back with Electrek soon for the latest updates.
FTC: We use income earning auto affiliate links.More.
Owner-operators are a huge part of the heavy truck market, and they’ve been among the most hesitant groups to transition from diesel to electric semi trucks. That may be changing, however, as Saldivar’s Trucking becomes first independent owner-operator in the US to deploy a Volvo VNR Electric Class 8 truck.
The higher up-front cost of electric semi trucks has been a huge obstacle for smaller fleets. That’s there are incentives from governments, utilities, and even non-profits to help overcome that initial obstacle. And the smart dealers are the ones who are putting in the hours to learn about those incentives, educate their customers, and ultimately sell more vehicles.
TEC Equipment is a smart dealer, and they worked closely with South Coast Air Quality Management District to secure the CARB funding and ensure Saldivar’s was able to ssecure $410,000 in funding from CARB’s On-Road Heavy-Duty Voucher Incentive Program (HVIP), which provides funding to replace older, heavy-duty trucks with zero-emission vehicles. The program is directed exclusively to small fleets with 10 vehicles or less that operate in California and aims to bridge the gap between the regulatory push for clean transportation and the financial realities faced by small business owners.
“TEC Equipment has been instrumental in supporting owner-operators like Saldivar’s Trucking through the transition to battery-electric vehicles,” explains Peter Voorhoeve, president of Volvo Trucks North America. “Their dedication to providing comprehensive support and securing necessary funding demonstrates how crucial dealer partners are in turning the vision of owning a battery-electric vehicle into a reality for fleets of all sizes.”
Saldivar’s Volvo VNR Electric features a six-battery configuration, with 565 kWh of storage capacity and a 250 kW charging capability. The zero-tailpipe emission truck can charge to 80% in 90 minutes to provide a range of up to 275 miles.
“While large fleets often make headlines for their ambitious investments in battery-electric vehicles, nearly half of the 3.5 million professional truck drivers in the U.S. are owner-operators running their businesses with just one truck,” adds Voorhoeve. “These small operations face unique challenges, from the initial capital investment to securing adequate charging infrastructure … this collaboration is a perfect example of the important role to be played by truck dealers and why stakeholders need to work together to succeed in this new era of sustainable transportation.” We need solutions that work for different fleets of all sizes in the marketplace,” added Voorhoeve.”
Electrek’s Take
Electrifying America’s commercial trucking fleet can’t happen soon enough – for the health of the people who live and work near these vehicles, the health of the planet they drive on, and (thanks to their substantially lower operating costs) the health of the businesses that deploy them. TEC is doing a great job advancing the cause, and acting as true expert partners for their customers.
Mercedes released a look at the powertrain technology of its upcoming electric CLA, and it includes tons of neat EV tech and some interesting options for battery technology and what looks to be the most flexible charging system we’ve seen yet.
We’ve already learned a fair amount about the CLA after first seeing the concept last year, and Mercedes released a few new specifics today regarding its powertrain.
In keeping with previous information we knew, the CLA is targeting extremely high efficiency of 12kWh/100km, which translates to just 193Wh/mi or 5.2mi/kWh. That’s more efficient than anything else on the road today – with Lucid’s Air Pure reaching 200Wh/mi, or 5mi/kWh. And just less than what Tesla is claiming the Cybercab will be capable of, at 5.5kWh/mi.
This is thanks to Mercedes’ new compact EDU 2.0 electric motor, which is part of its new Mercedes Modular Architecture (MMA) which will underpin its upcoming electric vehicles. The drive motor will be 200kW on the rear axle, though all-wheel drive models will be available with an additional 80kW unit on the front axle. A two-speed transmission will ensure efficiency at high speeds and low.
For more efficiency in cold weather, the CLA will use an air-to-air heat pump which is able to capture heat from the motor, battery, and ambient air to heat the cabin. While batteries and motors don’t make nearly as much waste heat as inefficient ICE engines, it’s still good to be able to channel heat to wherever you need it.
Mercedes says that the CLA will come equipped with a choice of two different batteries, each with different chemistries.
The larger 85kWh model will be capable of an unnecessarily-high 750km (466mi) of WLTP range – though WLTP numbers are always higher than EPA numbers, so expect something in the high-300s in EPA parlance. This battery will add silicon oxide to the anode for higher energy density, a technology that has been pioneered by Sila Nanotechnologies, a company which Mercedes is a lead investor in.
The smaller battery will be 58kWh, and will use lithium iron phosphate (LFP) chemistry. LFP is a cheaper but lower energy density technology, with higher long-term durability and simpler sourcing of minerals (it uses no cobalt, whereas Mercedes says cobalt has been “reduced” in the larger batteries). However, LFP generally has slower fast charging and cold weather performance.
On charging: the “premium” battery will have an 800V configuration capable of up to 320kW charging speeds. Mercedes says this can add 300km (186mi) of range in 10 minutes, and also says that the car will have a broad charging curve, which means you’ll get high charge rates even if the battery isn’t close to empty. It didn’t specify if the smaller LFP battery will have the same charge rate.
This high charging rate allowed Mercedes to set a record traveling 3,717km (2,309mi) in 24 hours at the Nardo test track in Italy in a pre-production CLA. That’s an average travel rate of 96mph – including time spent charging.
We also learned something about Mercedes’ NACS adoption plans. While just about everyone has committed to transitioning cars to NACS, it has taken longer than expected (largely due to Tesla’s chaotic CEO firing the whole supercharger team for little reason), and few cars have native NACS inlets yet. Some brands can already charge at Superchargers with adapters, but Mercedes is still on Tesla’s “coming soon” page.
As a result of delays in onbaording automakers, some seem to have pulled back on their plans, pushing NACS ports to later model years. But Mercedes has a new and unique solution – it will just put both CCS and NACS ports on the CLA, right on top of each other.
Mercedes says “in the future, new entry-level models will be capable of bidirectional charging,” but isn’t clear whether this model will be capable of that.
Electrek’s Take
While this is short of a full release of specs, we’re excited by what we see here. Mercedes seems to confirm that they’re meeting the efficiency goals they set out, and we like that they’re offering a variety of options and taking advantage of some newer EV tech like 800V charging infrastructure.
The inclusion of both NACS and CCS is very interesting, again offering options to owners during the transition. That seems to be the big message from Mercedes here – we’re not going to just pick one tool, we’re going to use all of them.
But pricing and availability are obviously big questions, as is design.
The concept looks fantastic, but concepts always change on their way into production. The shape of the camouflaged test vehicle is very different – but looks to have some shrouding on the front and back to hide its shape, so we’ll have to wait until we see this thing unveiled for more.
And as for pricing – Mercedes says the CLA will be an “entry-level” car, but who knows what that means anymore these days. The base ICE CLA starts at around $44k currently, so lets see if they can hit that number.
Charge your electric vehicle at home using rooftop solar panels. Find a reliable and competitively priced solar installer near you on EnergySage, for free. They have pre-vetted installers competing for your business, ensuring high-quality solutions and 20-30% savings. It’s free, with no sales calls until you choose an installer. Compare personalized solar quotes online and receive guidance from unbiased Energy Advisers. Get started here. – ad*
FTC: We use income earning auto affiliate links.More.
Daimler Truck North America has helped alcohol distributor Reyes Beverage Group deploy fully 29 zero-emission Freightliner eCascadia Class 8 electric semi trucks in its California delivery fleet.
Reyes Beverage Group (RGB) plans to deploy the first twenty Freightliner electric semi trucks at its Golden Brands – East Bay and Harbor Distributing – Huntington Beach warehouses, marking the first phase in the company’s transition to a fully zero emission truck fleet by 2039. An additional nine eCascadia Class 8 HDEVs are scheduled for delivery to RBG’s Gate City Beverage – San Bernardino warehouse before the end of 2024.
RBG’s decision to adopt the Freightliner eCascadia builds on its recent transition to renewable diesel and its ongoing idle-time reduction program. These electric vehicles (EVs) “go electric” will contribute significantly toward the company’s stated goal of reducing its carbon emissions 60 percent by 2030. These 2 trucks will save some 98,000 gallons of diesel fuel annually, and avoid putting nearly 700 metric tons of carbon dioxide and other harmful emissions into California’s air each year.
“We are excited to be among the first in our industry to adopt these electric vehicles,” explains Tom Reyes, President of RBG West. “This is a significant step toward our sustainability goals and ensuring compliance with state regulation as we transition our fleet to EV.”
Freightliner’s eCascadia electric semi trucks offer a number of battery and drive axle configurations with ranges between 155 and 230 miles, depending on the truck specification, to perfectly match customers’ needs without compromising on performance and load capacity. RBG’s Freightliner eCascadia tractors will rely on electric charging stations installed at each facility, allowing them to recharge to 80% capacity in as little as 90 minutes for RGB’s trucks, which feature a typical driving range of 220 miles as equipped.