Connect with us

Published

on

Hyundai’s low-cost Casper Electric (also known overseas as the Inster EV) is getting a rugged new XRT variant. The new Casper EV XRT trim was spotted for the first time in Korea ahead of its official debut.

Hyundai unveiled the Casper Electric in June at the Busan International Mobility Show in South Korea.

The new low-cost EV stole the show with a compact but still functional design. Despite its small size, Hyundai expects it to have a significant impact with its “potential to accelerate the popularization of electric vehicles.”

Hyundai opened Casper EV pre-orders in its home market with starting prices at just $22,800 (31.5 million won).

With government incentives, Hyundai said the entry-level “Inspiration” model can be bought for as little as $14,500 (20 million won).

The new EV is “the most attractive choice” for many buyers looking to go electric, according to Hyundai. With a 49 kWh battery, Hyundai’s Casper Electric has up to 195 miles (315 km) range on a single charge.

Hyundai's-Casper-EV-XRT
Hyundai Casper Electric (Source: Hyundai)

Hyundai’s Casper EV is getting the XRT treatment

At 3,825 mm long, the all-electric Casper is even smaller than the Chevy Bolt EV, but Hyundai says it’s perfect for city travel. It’s actually bigger than the gas-powered Casper (230 mm longer and 15 mm wider), with more room for rear passengers.

Hyundai’s Casper EV is already getting a new XRT variant. The off-road-focused model was spotted in Korea ahead of its official launch.

Hyundai Casper Electric XRT trim spotted (Source: HealerTV)

Despite the camouflage, the video from HealerTV reveals aggressive new design elements. The reporter notes Hyundai’s new trim “felt a bit strong” and gives “a hint like the GT.”

The turn signals and headlights remain the same, but the front bumper appears completely redesigned.

Hyundai's-Casper-EV
Hyundai Casper EV interior (Source: Hyundai)

Hyundai’s Casper Electric is being shipped overseas as the Inster EV. In Europe, the Inster starts at $27,000 (25,000 euros) and has a WLTP range of up to 220 miles (355 km).

Launching in the US?

For those in the US, There’s good and bad news. The bad news is that Hyundai is not expected to launch the Casper (Inster) EV in the US. However, the good news is that the upgraded 2025 IONIQ 5 will begin arriving at US dealerships this fall.

Hyundai-IONIQ-5-XRT
2025 Hyundai IONIQ 5 XRT (Source: Hyundai)

The US-built 2025 IONIQ 5 has more range and features, and it comes with an NACS port to access Tesla’s Supercharger network. It will also be available in a new XRT trim.

Hyundai-2025-IONIQ-5-XRT
2025 Hyundai IONIQ 5 XRT (Source: Hyundai)

Hyundai’s IONIQ 5 XRT was spotted out in public for the first time this week, revealing aggressive new design elements (see the video here).

What do you think of the new XRT variants? Will Hyundai’s rugged new EVs live up to the hype? Let us know your thoughts below.

Source: HealerTV

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Trump approves U.S. Steel merger with Japan’s Nippon after companies sign national security agreement

Published

on

By

Trump approves U.S. Steel merger with Japan’s Nippon after companies sign national security agreement

US President Donald Trump receives a gold helmet with his name on it during a visit to US Steel – Irvin Works in West Mifflin, Pennsylvania, May 30, 2025, to mark the ‘partnership’ between Nippon Steel and US Steel.

Saul Loeb | AFP | Getty Images

President Donald Trump issued an executive order on Friday approving U.S. Steel’s merger with Japan’s Nippon Steel, after the companies signed a national security agreement with the U.S. government.

U.S. Steel and Nippon said the national security agreement will give the U.S. government a “golden share” and makes certain commitments related to governance, domestic production, and trade. The companies did not elaborate on what powers the U.S. government will wield with its golden share.

“All necessary regulatory approvals for the partnership have now been received, and the partnership is expected to be finalized promptly,” U.S. Steel and Nippon said in a statement.

The national security agreement calls for Nippon to make $11 billion in new investments by 2028, including initial spending on a greenfield project that will be completed after 2028, the companies said.

Trump said Thursday that the golden share gives the president “total control” without elaborating. Pennsylvania Sen. Dave McCormick told CNBC last month that the golden share will effectively allow the government to control a number of board seats.

Trump opposed U.S. Steel‘s controversial sale to Nippon in the runup to the 2024 president election, as Republicans and Democrats have leaned into protecting U.S. companies against foreign competitors.

But Trump started softening his opposition to the takeover after assuming office, ordering a new review of the deal in April. President Joe Biden had blocked U.S. Steel’s sale to Nippon during his final days in office, citing national security concerns, despite Japan being a close ally.

Trump has avoided calling the deal an acquisition or merger, describing it as a “partnership” in a May 23 post on his social media platform Truth Social. He insisted that U.S. Steel will remain “controlled by the USA” during a speech to workers at one of the company’s plants outside Pittsburgh on May 30.

U.S. Steel made clear it would become a “wholly owned subsidiary” of Nippon North America under the terms of the merger agreement in an April 8 filing with the Securities and Exchange Commission. Trump’s description of the deal as a “partnership” caused confusion among investors and union leadership.

The president told U.S. Steel workers that Nippon will be a “great partner.” The Trump administration is currently engaged in trade talks with Japan as investors eagerly await signs that the U.S. will strike deals with key partners that avoid steep tariffs.

Trump told the steelworkers that Nippon had agreed to keep U.S. Steel’s blast furnaces operating at full capacity for a minimum of 10 years. The president said the deal would not result in layoffs and promised there would be “no outsourcing whatsoever.” He said workers will receive a $5,000 bonus.

Trump announced that he was doubling U.S. tariffs on steel imports to 50% during his remarks to U.S. Steel workers. Those tariffs went into effect on June 4.

Continue Reading

Environment

This new EV charging feature could make apps and cards obsolete

Published

on

By

This new EV charging feature could make apps and cards obsolete

European EV charging provider Allego has launched what is says is Europe’s first rollout of the “world’s safest and most secure” Plug & Charge technology. 

The new tech is based on the open industry standard OCPP 2.0.1 and promises to make EV charging as easy as, well, plugging in your car. Forget apps, cards, and complicated sign-ins. If your EV is compatible, all you have to do is pull up and plug in.

Jean Gadrat, Allego’s CMO, said, “By removing digital friction points, apps, and cards, we give drivers the confidence to travel further and charge more conveniently. Whether in the city, on the highway, or abroad, Plug & Charge delivers the same secure, one-step charging experience.”

Here’s how Allego’s Plug & Charge works

Plug & Charge is an ISO 15118-based authentication and payment method built by Allego on OCPP 2.0.1, standardizing communication between OCPP-compliant chargers and networks.

Advertisement – scroll for more content

Once your car is enabled for Plug & Charge, the process is completely hands-off. You plug in, and your EV and the charger swap secure digital certificates to authenticate your account. There’s no need to tap an RFID card, open an app, or even press a button.

Allego’s system supports Mutual TLS encryption and certificate-based authentication, so only authorized vehicles can charge. That means no billing mistakes or fraudulent access, which has been a big concern with some older public charging setups.

Available across Europe now

Allego’s Plug & Charge functionality is at more than 5,000 fast and ultra-fast chargers across Europe, and it also works across partner networks, deploying a truly cross-network Plug & Charge experience.

It’s a future-ready platform, too. Thanks to OCPP 2.0.1, the protocol supports remote firmware updates, advanced security, and new features as they become available. So your charger can grow along with your EV.

“As new vehicle models and charging technologies emerge, OCPP 2.0.1 ensures your car always ‘speaks the same language’ as the charger,” said Manuel Trotta, Allego’s head of mobility solutions.

Allego partnered with Alpitronic, Hubject, and Ford to bring its cross-network Plug & Charge to life.

Read more: Waffle House is getting DC fast chargers – and it’s a genius move


To limit power outages and make your home more resilient, consider going solar with a battery storage system. In order to find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and you share your phone number with them.

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. –trusted affiliate link*

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

The Kia PV5 is a real-life Transformer: Here’s our first look at it as an electric truck

Published

on

By

The Kia PV5 is a real-life Transformer: Here's our first look at it as an electric truck

Kia is looking to shake things up with its new custom-tailored Platform Beyond Vehicles (PBVs). The PV5, Kia’s first electric van based on the platform, is already showing how versatile it is. After the PV5 was spotted for the first time with an open bed, Kia looks about ready to drop an electric truck variant.

Is Kia launching an electric truck PV5 variant?

At the 2024 Consumer Electronics Show (CES), Kia revealed its PBV strategy for the first time. The vehicles are designed as “total mobility solutions” that combine fit-for-purpose EVs with Hyundai’s latest software and tech.

Kia’s PBVs are based on Hyundai’s new ultra-flexible E-GMP.S EV platform, which can be custom-tailored for different uses. The first EV based on the platform, the PV5, launched earlier this year in the UK in two variations, Cargo and Passenger.

The Passenger model is fairly self-explanatory as a personal, everyday van, while the Cargo version is designed for commercial use.

Advertisement – scroll for more content

Kia said more variants were on the way, including a refrigerated truck, chassis cab, open-bed, luxury “Prime” passenger, and sliding truck models.

The open-bed variant was recently captured driving in Korea, giving us our first look at the Kia PV5 as an electric truck.

Kia-PV5-electric-truck
Kia PV5 open bed teaser (Source: Kia)

Although brief, the video from HealerTV, taken as the vehicle was driving by, reveals a few new details. It’s our closest look at the open-bed variant so far.

Like other PV5 variants, it appears to be the same up front. In fact, it’s almost identical to the first teaser Kia showed.

Kia PV5 open bed electric truck (Source: HealerTV)

It’s hard to tell from a video, but the reporter mentioned the electric truck “seemed like it was just the right size.” Since the PV5 Passenger is 4,695 mm in length, 1,895 mm in width, and 1,899 mm in height, we can expect it to be about the same size. To give you a better idea, it’s slightly smaller than the Volkswagen ID.Buzz SWB.

More variants on the way

The electric truck, or open-bed variant, comes after we saw the PV5 “Conversion,” which will feature new models, including a light camper and a camper van.

We got a preview of the camper van after Kia revealed two new “Spielraum” PV5 concepts, including one with a refrigerator, microwave oven, and even a wine cellar. And then we got a look at the PV5 “WKNDR,” an “adventure-ready” electric van concept. Kia’s electric van even has a wheelchair-friendly version, the PV5 WAV.

Kia-electric-camper-van
Kia PV5 Spielraum concept (Source: Kia)

What’s next? Kia plans to launch a full range of electric vans. Next up will be the larger PV7 in 2027, followed by the PV9 in 2029. There’s also a smaller PV1, expected to arrive in late 2026 or early 2027.

In the future, Kia plans ot launch a Robotaxi model through a collaboration with Motional. All PBV models will be built at Kia’s Hwaseong EVO plant in South Korea. The facility can build up to 150,000 vehicles annually.

Kia-PV5-electric-truck
Kia PBV models (Source: Kia)

Kia said its goal is to “design PBVs that are simple and intuitive to operate and engage with, regardless of where, when or how they are used.” In other words, Kia wants to make your life easier, “Whether the purpose of the vehicle is to transport people, move goods, or meet logistics or personal mobility needs.”

In the UK, the PV5 Passenger and Cargo models start at £32,995 ($44,000) and £27,645 ($37,000), respectively.

It’s available with two battery pack options: 51.5 kWh or 71.2 kWh, offering WLTP ranges of 179 miles and 249 miles, respectively. The Cargo version gets slightly more range with 181 miles or 247 miles, respectively.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending