California Governor Gavin Newsom signed a new law directing the state to upgrade its electrical transmission system through use of new smart grid technologies and by replacing old wires with newer, high-tech ones in order to get the state ready for increased renewable electricity generation.
In recent years, there’s been a lot of noise regarding the difficulties of integrating renewable electricity into the grid, and upgrading grid capacity to deal with increased demand from electric vehicles.
These problems are real, but are often overstated by entities who want to keep things how they are – a grid and transportation network that are driven by fossil fuels, rather than renewables.
The issue is that, as renewables make up a larger percentage of grid electricity, there will be more fluctuations in supply due to the intermittent nature of solar and wind generation (and the distributed nature of rooftop solar). The two do complement each other to some extent – the wind tends to blow harder when the sun is down – but there needs to be some sort of backup in the form of consistent base-load generation, and dispatchable electricity to make up for peaks and troughs.
Batteries can help with that dispatchability by being tied to the grid and ready to smooth out those peaks and troughs. And, even when they’re not equipped with vehicle-to-grid technology, electric cars can be charged at times when there is excess electricity available, which means they won’t strain the grid too much during times of peak demand.
But all of this back-and-forth still results in increased congestion on the grid, and with our current “dumb” grid, there’s a prospect of needing to build huge new transmission lines in order to move all this electricity around. That’s expensive, but worse than that, it takes forever to do – beyond the permitting issues involved with construction, there’s always the issue of local NIMBYs who want the infrastructure built, they just want it built somewhere else.
Fortunately, there are solutions to these problems, and California’s new law directs the state to implement those solutions.
California law will upgrade the grid – for cheap
California’s new law, SB 1006, just signed by Governor Gavin Newsom, directs the state to use “grid-enhancing technologies” (GETs) and “reconductoring” to solve these growing pains with the grid.
GETs is just a catch-all term for smart grid solutions that make the grid more capable of managing loads efficiently. These include “advanced power flow control systems” which can channel power to where its needed, “dynamic line rating systems” which monitor local weather conditions to make the grid more responsive, and “topology optimization software” which helps to reroute traffic on a grid much like your phone’s traffic app might do for cars.
Combined, these technologies can reduce grid congestion by 40% or more, and reduce the need for curtailment, which is when renewable resources are available but not transferred to the grid due to congestion. And these can be built quickly and at low cost, without needing to wait for more transmission lines.
In addition to this smart grid tech, a very simple solution goes by the name “reconductoring,” which means simply replacing old wires with newer, lighter ones.
Old transmission wires use heavy steel cores, necessary to hold up the cables over the hundreds of yards they hang between electrical transmission towers. Around these cores, aluminum conductors are used to transmit the electricity.
Due to the weight of the steel, this means that you can only have so much aluminum in the wire. But if we used more modern, lighter, and stronger materials, that means we can add more conductive material and transfer more electricity through the same transmission lines.
So “reconductored” cables use structural materials like carbon fiber, which is much stronger and lighter than steel, and advanced materials that have less electrical resistance than aluminum. And while we’re at it, we can build sensors into the lines to enable the dynamic line rating systems mentioned above.
While carbon fiber is expensive, it’s a lot cheaper than building a new transmission line – adding new capacity through reconductoring is thought to cost less than half as much as adding it through building new transmission lines (California recently got a $600 million grant from the feds for these purposes). And, again, it happens faster too.
All of this should not only increase California’s grid capabilities and make it more ready for the future, it should also lower electricity prices. By reducing congestion and enabling more use of cheaper, cleaner alternatives like solar and wind generation, these upgrades should offer downward pressure on rates.
And, if these upgrades prove to be successful, California could once again provide a model to the country on how to get ready for the electrification future. A report from April said that widespread use of advanced conductors could increase the pace of new transmission capacity by 4x by 2035.
To limit power outages and make your home more resilient, consider going solar with a battery storage system. In order to find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and you share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. – ad*
FTC: We use income earning auto affiliate links.More.
Honda’s patent filings offer a clear glimpse into the company’s plans for an ultra-affordable electric motorcycle, integrating a proven chassis with a simple electric powertrain. It’s a clear glimpse into how the world’s most prolific motorcycle maker plans to challenge the nascent electric motorcycle market.
The filings in Honda’s new patent show a bike built around the familiar platform of the Honda Shine 100, a best-selling commuter in India, reimagined in electric form for a cost-effective future of urban mobility.
According to Cycle World’s Ben Purvis, Honda’s patent sketches outline a design that repurposes the Shine’s sturdy frame and chassis mounting points to house an electric motor and compact battery setup. Positioned where the engine once sat, a mid-motor drives the rear wheel via a single-speed reduction gear and chain – mirroring the essentials of the original gasoline-powered commuter bike.
Instead of a traditional fuel tank, the design features two lithium-ion battery packs, angled forward on either side of the spine frame and fitting neatly into the existing geometry.
Advertisement – scroll for more content
What makes the bike revealed in this patent even more interesting isn’t just its clever packaging, but rather the platform. By leveraging the proven Shine chassis, Honda can significantly cut development costs, manufacturing complexity, and market price. That’s a big statement given that surviving in price-sensitive markets like India demands simplicity and reliability. And by piggybacking off a proven platform, Honda can dramatically reduce the time to market from the time the boardroom bigwigs give the project the final green light.
Honda’s patent images show an electric motorcycle built on the same platform as the Honda Shine 100
The design still seems to feature styling that would be fairly consistent with the Shine 100, even down to a gas cap-like circular protrusion likely on top of a faux-tank. Some electric motorcycles in the past have used this location to hide a charging port, keeping similar form and function to outdated fuel tanks and fill ports, though it’s not clear if that is Honda’s intention.
It’s not clear what power level Honda could be targeting, but the Shine bike from which Honda’s creation draws its design inspiration could provide some clues. The Honda Shine 100 features a 99cc engine that provides around 7.3 horsepower (around 5.5 kW) and has a top speed of 85 km/h (53 mph), solidly planting it in the commuter segment of motorcycles.
The electric motorcycle in Honda’s design would be unlikely to target much higher performance as it would drastically increase the required battery capacity, and thus similar speeds of around 80-85 km/h (50-53 mph) would seem likely.
There also appears to be no active cooling, which would also limit the amount of power that Honda would be likely to draw continuously. The patent describes a channel formed by the two battery packs, leading to the speed controller and creating ducted cooling that pulls heat out of the batteries and electronics without drawing extra power.
Honda hasn’t released a final design, but I ask AI to create one based on the patent images. I’d ride that!
This emerging design is just one piece of Honda’s broader electric two-wheeler strategy. Their entry-level EM1 e: and Activa e: scooters launched with mobile battery packs and budget-friendly pricing. Meanwhile, high-tech concepts continually push the envelope. But this Shine-based bike aims squarely at the heart of mainstream affordability – a move likely to resonate with millions of new electric riders in developing regions like India where traditionally-styled small-dsiplacement motorcycles reign supreme.
Honda hasn’t revealed a timeline or pricing yet, but Honda’s patents offer real hope to fans of the brand’s electric efforts. If scaled effectively, this could be the first truly mass-market electric motorcycle from a major OEM, with a sticker price likely far below the $5,000 mark usually seen as a floor for commuter electric motorcycles from major manufacturers. That would also dramatically undercut models from brands like Zero or Harley-Davidson’s LiveWire, even as those brands rush to bring their own lower-cost models to market.
Electrek’s Take
Honda’s patent reveals a clever, no-frills EV designed to democratize electric two-wheeling, especially in developing markets that are even more price-sensitive than Western electric motorcycle customers.
Using a trusted frame, simple electric drive, and passive cooling, I’d say it definitely prioritizes cost over complexity, which is exactly what urban commuters need. If Honda can bring this to market, it would not just add another electric bike to the mix… it could create a new baseline for affordability in affordable electric mobility. Now we’re just waiting for the rubber to hit the road!
FTC: We use income earning auto affiliate links.More.
And today, Musk made it official that he will seek greater collaboration between three of his companies: Tesla, xAI, and twitter, in the form of an investment into xAI by Tesla.
The situation is a little more complicated than that, though.
Advertisement – scroll for more content
Tesla is a public company, owned by shareholders. Musk is the largest shareholder, but only owns around 12% of the company himself.
This is a different situation than xAI, which is a private company, owned by Musk. While there are other investors, he can exercise much more direct control over the company, and doesn’t have to put big decisions up to a vote.
One of the recent decisions he made with xAI was to purchase twitter in March. You may say, “wait, I thought he bought twitter back in 2022?,” and you’d be correct. Musk purchased twitter for $44 billion in 2022, which was widely agreed to be far too high a price, and then rapidly saw the company’s valuation drop to under $10 billion.
Then, in March 2025, Musk had xAI purchase twitter in an all-stock deal, valuing twitter company at $45 billion – again, far too high of a valuation, but considering he purchased the company from himself, he could set the price at whatever he wanted.
The move was widely considered to be a bailout of twitter, and the numbers involved considered arbitrary, perhaps partially to help save face for Musk after he made one of the worst business deals of all time.
Now the two are the same entity, and it seems clear that he would like to bring Tesla into the fold, in some way or another.
Musk has already improperly used resources from Tesla, a public company, to boost xAI and twitter, his private companies. Last year, he gave up Tesla’s priority position for highly sought-after NVIDIA H100 GPUs, instead shipping those GPUs to xAI and twitter. Tesla could have used these GPUs for training its FSD/Robotaxi systems, which Musk has claimed is the most important thing to Tesla’s future, but instead graciously sent them to his other company that used them to, uh, train a bot to say Nazi stuff apparently.
xAI has also poached talent from Tesla, multiple times, showing how Musk is using Tesla as a farm team for his private company.
So it hasn’t been a secret that Musk would like to use public money to bail out his private companies, as he’s been setting the stage for for a while now.
Musk has previously “discussed” getting Tesla to invest in xAI in the past, but the idea was never made official until today, when Musk said that he will put the idea to a shareholder vote.
In response to one of his superfans asking for the the opportunity to waste money on an overvalued social media app (which would mark the third time it has been overpaid for in as many years), and the backend fueling “MechaHitler,” Musk said this:
Tesla traditionally holds its annual shareholder meeting around the middle of the year, so if it were a normal year, this shareholder vote might be imminent.
But it’s not a normal year, as just last week Tesla announced an exceptionally late shareholder meeting, pushing it back to November, the latest it has ever held the meeting.
This means that Musk will have around four months to campaign for this idea – something that he’ll perhaps have more time to do, now that he’s no longer cosplaying as a government official.
We don’t know what the structure of the deal might look like yet, but Musk has been clear in the past that he wants more shares in Tesla. After selling many of his shares in order to buy twitter, he later complained that he doesn’t feel comfortable having less than 25% of Tesla. Given that his recent xAI/twitter deal was an all-stock deal, Musk could attempt to fund any investment of Tesla into xAI via shares, giving himself more Tesla shares in exchange for the company gaining a portion of xAI. Though to get him to 25% voting shares in Tesla, that would require either an enormous valuation for xAI, a small valuation for Tesla, or purchasing a large percentage of xAI (or, perhaps, all three, given how much higher TSLA’s valuation is than xAI’s).
We may however have a hint as to how that vote will go, because the last time Musk campaigned for a clearly terrible idea, Tesla shareholders ate it up.
In mid-2024, Musk ended his yearslong absenteeism at Tesla in a flurry of activity, hoping to persuade enough shareholders to vote for his illegal $55B pay package.
So it looks like we’ve got another campaign coming up, and if last time was any indication, expect some really bad decisions along the way. It worked last time, didn’t it?
Republicans recently killed a number of home energy efficiency credits, including the rooftop solar credit. That means you only have until the end of this year to upgrade your home before republicans raise the cost of doing so by an average of ~$10,000. So if you want to go solar, get started TODAY, because these things take time and the system needs to be active before you file for the credit.
To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here. – ad*
FTC: We use income earning auto affiliate links.More.
The off-highway equipment experts at Perkins and McElroy have teamed up to develop a plug-and-play battery electric power unit designed to help equipment OEMs and upfitters to seamlessly transition from diesel to battery electric power.
Designed to occupy the same space as the companies’ diesel-engined power units, Perkins dropped its new battery power unit into the similarly new McElroy TracStar 900i pipe fusion machine (specialized equipment used to join thermoplastic pipes like HDPE or polypropylene by heat-welding them end-to-end to form a continuous length pf pipe).
Perkins’ battery electric power unit replaces the company’s proprietary 134 hp, 3.6 liter 904 Series Tier V diesel engine, enabling units that are already deployed to be quickly upgraded to electric power – and helping trade allies and development partners to easily retrofit existing equipment in order to add zero-emission options to their operational fleet.
“We’re actively helping customers navigate the shift in power system requirements, with a range of advanced power systems including electric, diesel-electric and alternative fuel compatible engines,” says Jaz Gill, vice president, global sales, marketing at Perkins. “When it comes to the innovative fully integrated battery electric power unit, it can be ‘dropped in’ to a machine to replace a diesel engine. The system consists of a Perkins battery along with inverters, motors and on-board chargers – all packaged up into a compact drop-in system to support seamless transition from diesel to electric for our customers looking to make that move.”
Advertisement – scroll for more content
McElroy believes that an electric, emissions-free power unit like this one will open new opportunities and applications for its customers.
“Their team has done a phenomenal job of integrating their battery electric system into our TracStar 900i,” explains McElroy President and CEO Chip McElroy. “We’re really excited to see what the market thinks about this concept.”
Development of the battery electric powered pipe fusion machine was completed in about nine months. Future Perkins-powered electric equipment running the 904 diesel (small excavators, telehandlers, pumps, and gensets) could be developed even more quickly. You can find out more in the company’s promo video, below.