Connect with us

Published

4 months ago

on

Astronomers are watching two unusual black holes, each presenting phenomena that challenge current understanding of these cosmic giants. One, a “serial killer” black hole, is about to devour its second star within five years, while the other, part of the newly discovered triple system V404 Cygni, has disrupted long-held theories of black hole formation.

The Black Hole “Serial Killer” Reaches for Another Star

Located 215 million light-years from Earth, this supermassive black hole first caught scientists’ attention five years ago with a bright flare. The flare came from a star that had drifted too close to it, sparking what astronomers call a tidal disruption event, or AT1910qix. Gravitational forces stretched and tore apart the star, leaving part of its remains around the black hole and launching the rest into space.

Led by Dr Matt Nicholl of Queen’s University Belfast, a team of astronomers has tracked this remnant disc over several years using high-powered telescopes such as the Chandra X-ray Observatory and the Hubble Space Telescope. Recently, another star has started passing through this disc every 48 hours, creating bright X-ray bursts with each collision. Dr Nicholl describes it as similar to a diver creating splashes in a pool each time they hit the water, with the star as the diver and the disc as the pool.

“What’s uncertain is what will ultimately happen to this star,” Dr Nicholl said. “It could be pulled into the black hole, or it may eventually disintegrate from these repeated impacts.”

A Rare Triple Black Hole System in Cygnus

Meanwhile, in the constellation Cygnus, a rare triple system is raising questions about black hole origins. Known as V404 Cygni, this system includes a nine-solar-mass black hole and two orbiting stars, one much farther away than astronomers had thought possible. Kevin Burdge, an MIT research fellow, notes that a supernova typically pushes any distant companions too far to remain gravitationally bound. But in this system, a distant star orbits at a staggering 300 billion miles.

In their Nature paper, Dr Burdge and his team proposed that this black hole may have formed without a supernova explosion, possibly “quietly” collapsing without ejecting its nearby companions. This hypothesis has sparked interest among scientists, as it hints at new black hole formation processes yet to be fully understood.

Daniel Holz, an astrophysicist at the University of Chicago, noted that while unlikely, nature often defies assumptions. This discovery could open a new chapter in black hole research.

Related Topics:
Continue Reading

Science

NASA’s New Missions Will Map the Sun and the Cosmos

Published

12 hours ago

on

March 4, 2025

By

NASA’s New Missions Will Map the Sun and the Cosmos

Two NASA missions aimed at advancing space research are scheduled for launch aboard a SpaceX Falcon 9 rocket on March 2 from Launch Complex 4E at Vandenberg Space Force Base in California. The spacecraft, PUNCH and SPHEREx, have been designed for separate but complementary scientific objectives. While PUNCH will focus on the dynamics of the Sun’s corona and solar wind, SPHEREx will survey the broader universe using infrared observations. This dual launch, facilitated under NASA’s Launch Services Program, is expected to enhance understanding of cosmic evolution and space weather phenomena.

PUNCH to Study Solar Wind and Space Weather

As reported by Space.com, according to NASA, the Polarimeter to Unify the Corona and Heliosphere (PUNCH) mission consists of four small satellites designed to create three-dimensional images of the Sun’s outer atmosphere. These satellites will use polarized light to track solar events such as coronal mass ejections (CMEs), helping scientists determine their trajectories and potential impacts on Earth. Speaking to Space.com, Nicholeen Viall, PUNCH mission scientist at NASA’s Goddard Space Flight Center, stated that the mission is expected to provide significantly improved resolution compared to previous heliophysics missions like STEREO.

SPHEREx to Map the Universe in Infrared

As per NASA, the Spectro-Photometer for the History of the Universe, Epoch of Reionisation, and Ices Explorer (SPHEREx) will conduct an extensive infrared survey of the entire sky every six months. Unlike the James Webb Space Telescope, which captures highly detailed images of specific regions, SPHEREx is designed to generate broad cosmic maps in 102 wavelengths. In a statement to Space.com, Phil Korngut, SPHEREx instrument scientist at the California Institute of Technology, noted that the data will contribute to research on cosmic inflation, galaxy formation, and the origins of water in planetary systems.

Both missions are expected to play a crucial role in expanding current knowledge of space phenomena, with their launch anticipated to provide valuable insights into both solar and cosmic environments.

For details of the latest launches and news from Samsung, Xiaomi, Realme, OnePlus, Oppo and other companies at the Mobile World Congress in Barcelona, visit our MWC 2025 hub.

Continue Reading

Science

SpaceX Falcon 9 Launches Athena Lander, NASA’s Lunar Trailblazer to Moon

Published

13 hours ago

on

March 4, 2025

By

SpaceX Falcon 9 Launches Athena Lander, NASA's Lunar Trailblazer to Moon

A SpaceX Falcon 9 rocket lifted off from Kennedy Space Center on February 26, 2025, carrying the Athena lunar lander and NASA’s Lunar Trailblazer orbiter. The launch, which took place at 7:16 p.m. EST from Launch Complex-39A, marked a significant step in lunar exploration. Athena, developed by Intuitive Machines, is designed to investigate lunar water ice deposits, while Lunar Trailblazer will study similar phenomena from orbit.

Scientific Goals and Technology

As per reports, according to NASA, Athena is equipped with ten scientific instruments, including the Polar Resources Ice Mining Experiment 1 (PRIME-1). The experiment consists of the Regolith Ice Drill for Exploring New Terrain (TRIDENT) and the Mass Spectrometer observing lunar operations (MSolo), both of which will work to extract and analyse samples from beneath the lunar surface. These investigations aim to provide critical data on the presence of water ice, supporting future in-situ resource utilisation (ISRU) efforts.

Lunar Trailblazer, an orbiter developed by NASA, will complement Athena’s findings by mapping water ice deposits across the lunar surface. Scientists have stated that its data will enhance the understanding of lunar ice distribution, particularly in the Mons Mouton region, where Athena is expected to land.

Landing Plans and Exploration Vehicles

Reports indicate that Athena will reach lunar orbit in four to five days and attempt a landing between 1.5 and three days after that. The mission will last approximately ten Earth days. To extend its exploration capabilities, Athena carries two secondary vehicles: MAPP, a rover designed by Lunar Outpost, and Grace, a hopping robot developed by Intuitive Machines. Grace will explore shadowed craters inaccessible to wheeled vehicles, while MAPP will establish a lunar cellular network using the Lunar Surface Communications System (LSCS) developed by Nokia Bell Labs.

Challenges and Expectations

This mission follows Intuitive Machines’ IM-1 mission, which achieved the first soft lunar landing by a private company but encountered a landing issue that affected data transmission. Trent Martin, Senior Vice President of Space Systems at Intuitive Machines, stated to Space.com that improved landing accuracy is a primary focus for IM-2.

NASA’s contract for IM-2 was initially valued at $47 million but increased to $62.5 million due to additional requirements, including temperature data collection. Reports suggest that Athena and Lunar Trailblazer are part of a broader lunar exploration effort, joining missions such as Firefly Aerospace’s Ghost Riders in the Sky and ispace’s Resilience lander, both launched earlier in 2025.

For details of the latest launches and news from Samsung, Xiaomi, Realme, OnePlus, Oppo and other companies at the Mobile World Congress in Barcelona, visit our MWC 2025 hub.

Continue Reading

Science

Scientists Find a New Way To Turn Stale Bread Into Carbon Electrodes

Published

14 hours ago

on

March 4, 2025

By

Scientists Find a New Way To Turn Stale Bread Into Carbon Electrodes

A team of engineers has introduced two innovative techniques for shaping carbon electrodes derived from bread. The methods, which build upon previous research, enable the formation of electrodes in precise and sturdy forms. These advancements could enhance the sustainability of electrode production by utilising stale bread, a commonly wasted food item. The process involves heating bread at high temperatures in an oxygen-free environment, converting it into a carbon-based material suitable for applications such as desalination systems. The research aims to refine this process for potential large-scale production, offering an eco-friendly alternative for carbon electrode manufacturing.

New Techniques for Molding Carbon Electrodes

According to the study published in Royal Society Open Science, the research was conducted by David Bujdos, Zachary Kuzel and Adam Wood from Saint Vincent College and the University of Pittsburgh. The team built upon earlier efforts by Adam Wood, who had previously demonstrated that stale bread could be used to produce carbon electrodes due to its high carbon content.

The latest development introduces two techniques that allow for shaping the electrodes into desired forms. The first method involves compressing bread using a 3D-printed mold before subjecting it to the heating process. This technique enables the formation of precise electrode shapes. In a test, a zigzag mold was used to demonstrate its effectiveness.

The second method requires blending bread with water before shaping it manually. Once formed, the material is dried and carbonised in an oven. While this approach provides less precision, the resulting electrodes are reportedly more durable.

Potential for Sustainable Electrode Production

As per reports, the researchers believe these methods could contribute to the development of a low-cost capacitive desalination system. The aim is to create an environmentally friendly solution that reduces food waste while addressing water purification challenges. Efforts are underway to refine the process and explore possibilities for large-scale implementation.

For details of the latest launches and news from Samsung, Xiaomi, Realme, OnePlus, Oppo and other companies at the Mobile World Congress in Barcelona, visit our MWC 2025 hub.


People in Modern Societies Sleep More but Have Irregular Sleep Cycles



Microsoft Copilot App for macOS Released; iPhone and iPad Apps Get Updates

Continue Reading

Trending