![Beta Technologies founder completes first test flight in its production-intent eCTOL [Video]](https://i0.wp.com/electrek.co/wp-content/uploads/sites/3/2024/11/Beta-test-flight-eCTOL-mountains.jpg?resize=1200,628&quality=82&strip=all&ssl=1)
Beta Technologies founder completes first test flight in its production-intent eCTOL [Video]
All-electric aircraft developer BETA Technologies has shared another important milestone in bringing its first two vessels to market. Most recently, BETA’s founder, CEO, and test pilot Kyle Clark took the production version of its ALIA eCTOL up for its first flight, as seen in the video below.
BETA Technologies is a fully integrated electric aircraft and systems developer based in Vermont. Three years ago, it debuted its first electric vertical takeoff and landing (eVTOL) aircraft, the ALIA–250. That BETA vessel has since been renamed the ALIA VTOL and completed a piloted test flight transitioning mid-air this past April.
In addition to the ALIA VTOL, BETA has also been developing an electric conventional takeoff and landing (eCTOL) plane called the ALIA CTOL. To date, it has flown tens of thousands of test miles en route to evaluation flights for FAA certification. That aircraft is targeting full approval for commercial operations by 2025.
As BETA moves closer to bringing the ALIA CTOL to the public, it has completed its first bonafide production build in South Burlington. Following a Special Airworthiness Certificate from the Federal Aviation Administration (FAA), BETA has successfully taken its production-ready ALIA CTOL up for a test flight, piloted by its founder and CEO.
Watch BETA’s founder complete a CTOL test flight
BETA Technologies shared details of its first successful production CTOL test flight today alongside the images above and the full video below.
Once the production-intent build of the ALIA CTOL was complete, the FAA inspected the aircraft for safety and compliance before granting BETA a Multipurpose Special Airworthiness Certificate for Experimental Research & Development, Market Survey, and Crew Training, signing-off approval for test flights.
On November 13, BETA CEO, founder, and test pilot Kyle Clark conducted the first test flight of the ALIA CTOL aircraft, which lasted nearly an hour. The test included a conventional runway takeoff before the aircraft climbed to 7,000 feet.
While in the air, Clark tested the aircraft’s handling qualities, stability, control test points, and initial airspeed expansion before completing several approaches ahead of a normal landing. Clark spoke following the successful flight:
This start of our production CX300 flight test campaign is a result of years of hard work and focus on studying customer requirements, hard engineering, manufacturing, production, quality and test. It represents a significant milestone for BETA, and is the beginning of an exciting new phase for the business. With this, we’re one step closer to putting this technology into the hands of our customers.
We learned a lot from this first production build. We weren’t just building an aircraft company, we were building and refining a system to build high quality aircraft efficiently. This first build allowed the team to collect data and insight on manufacturing labor, tooling design, processes, yields and sequences, all of which are being used to refine our production systems.
With its production test flight campaign now underway, BETA says it will continue testing the ALIA CTOL aircraft for the standard 50 hours required before qualifying for a Market Survey and Crew Training certificate. That next certificate will enable BETA to fly outside of Burlington and Plattsburgh and continue training additional pilots on the aircraft.
The company shared it will also continue production of additional aircraft, including ALIA CTOL and ALIA VTOL configurations, the latter of which was recently teased in October. You can view footage of BETA’s CTOL flight below.
FTC: We use income earning auto affiliate links. More.
Environment
U.S. crude oil falls below $60 a barrel to lowest since 2021 on tariff-fueled recession fears
A view shows disused oil pump jacks at the Airankol oil field operated by Caspiy Neft in the Atyrau Region, Kazakhstan April 2, 2025.
Pavel Mikheyev | Reuters
U.S. oil prices dropped below $60 a barrel on Sunday on fears President Donald Trump’s global tariffs would push the U.S., and maybe the world, into a recession.
Futures tied to U.S. West Texas intermediate crude fell more than 3% to $59.74 on Sunday night. The move comes after back-to-back 6% declines last week. WTI is now at the lowest since April 2021.
Worries are mounting that tariffs could lead to higher prices for businesses, which could lead to a slowdown in economic activity that would ultimately hurt demand for oil.
Oil futures, 5 years
The tariffs, which are set to take effect this week, “would likely push the U.S. and possibly global economy into recession this year,” according to JPMorgan. The firm on Thursday raised its odds of a recession this year to 60% following the tariff rollout, up from 40%.
Fueled by incentives from the Illinois EPA and the state’s largest utility company, new EV registrations nearly quadrupled the 12% first-quarter increase in EV registrations nationally – and there are no signs the state is slowing down.
Despite the dramatic slowdown of Tesla’s US deliveries, sales of electric vehicles overall have perked up in recent months, with Illinois’ EV adoption rate well above the Q1 uptick nationally. Crain’s Chicago Business reports that the number of new EVs registered across the state totaled 9,821 January through March, compared with “just” 6,535 EVs registered in the state during the same period in 2024.
Those numbers represent more than 50% growth in EV registrations – far beyond the expected 12% first-quarter increase nationally being projected by Cox Automotive. (!)
What’s going on in Illinois?
While President Trump and Elmo were running for re-election, they campaigned on the threat promise of canceling the $7,500 federal tax credit for EVs. Along with California Governor Gavin Newsom, Illinois’ Governor JB Pritzker made countermoves – launching a $4,000 rebate for new electric cars and up to $1,500 for the purchase of a new electric motorcycle.
At the same time, the state’s largest utility, ComEd, launched a $90 million EV incentive program featuring a new Point of Purchase initiative to deliver instant discounts to qualifying business and public sector customers who make the switch to electric vehicles. That program has driven a surge in Class 3-6 medium duty commercial EVs, which are eligible fro $20-30,000 in utility rebates on top of federal tax credits and other incentives (Class 1-2 EVs are eligible for up to $7,500).
We covered the launch of those incentives when the program was announced at Chicago Drives Electric last year, but the message here is simple: incentives work.
SOURCES: Chicago Business, Ray Cunningham; featured image by the author.
FTC: We use income earning auto affiliate links. More.
The electric construction equipment experts at XCMG just released a new, 25 ton electric crawler excavator ahead of bauma 2025 – and they have their eye on the global urban construction, mine operations, and logistical material handling markets.
Powered by a high-capacity 400 kWh lithium iron phosphate battery capable of delivering up to 8 hours of continuous operation, the XE215EV electric excavator promises uninterrupted operation at a lower cost of ownership and with even less downtime than its diesel counterparts.
XCMG is delivering on part of that reduced downtime promise with the lower maintenance and easier repair needs of electric equipment, and delivering on the rest of it with lickety-quick DC fast charging that can recharge the machine’s massive battery in 1.5-2 hours … but that’s not the slick bit. The XCMG XE125EV can be powered up without leaving the job site thanks to its BYD battery swap technology.
We first covered XCMG and its battery swap technology back in January, and covered similar battery-swap tech being developed by MOOG Construction offshoot ZQUIP, as well – but while XCMG’s battery tech has been in production for several years, it’s still not widely known about in the West (even within the industry).
XCMG showed off its latest electric equipment at the December 2024 bauma China, including an updated version of its of its 85-ton autonomous electric mining truck that features a fully cab-less design – meaning there isn’t even a place for an operator to sit, let alone operate. And that’s too bad, because what operator wouldn’t want to experience an electric truck putting down 1070 hp more than 16,000 lb-ft of torque!?
Easy in, easy out
The best part? All of the company’s heavy equipment assets – from excavators to terminal tractors to dump trucks and wheel loaders – all use the same 400 kWh BYD battery packs, Milwaukee tool style. That means an equipment fleet can utilize x number of vehicles with a fraction of the total battery capacity and material needs of other asset brands. That’s not just a smart use of limited materials, it’s a smarter use of energy.
You can check out all the XE215EV’s specs at this tear sheet, and get an in-person look at the Chinese company’s latest electric excavator this week in Munich, Germany.
SOURCE | IMAGES: XCMG.
FTC: We use income earning auto affiliate links. More.
-
Sports2 years ago‘Storybook stuff’: Inside the night Bryce Harper sent the Phillies to the World Series
-
Sports1 year agoStory injured on diving stop, exits Red Sox game
-
Sports1 year agoGame 1 of WS least-watched in recorded history
-
Sports2 years agoMLB Rank 2023: Ranking baseball’s top 100 players
-
Sports4 years ago
Team Europe easily wins 4th straight Laver Cup
-
Environment2 years agoJapan and South Korea have a lot at stake in a free and open South China Sea
-
Environment2 years agoGame-changing Lectric XPedition launched as affordable electric cargo bike
-
Business3 years agoBank of England’s extraordinary response to government policy is almost unthinkable | Ed Conway