3717 Kilometer in 24 Stunden: Kein Elektroauto kam bislang weiter als der Mercedes-Benz CLA auf seiner Fahrt in Nardò. Im Windkanal wurde die Fahrzeugtarnung an den Zielwert der Serienfahrzeugs angeglichen. // 3717 kilometers in 24 hours: No electric car has ever gone further than the Mercedes-Benz CLA on its journey in Nardò. In the wind tunnel, the vehicle camouflage was adjusted to the specified value of the production vehicle.
Mercedes released a look at the powertrain technology of its upcoming electric CLA, and it includes tons of neat EV tech and some interesting options for battery technology and what looks to be the most flexible charging system we’ve seen yet.
We’ve already learned a fair amount about the CLA after first seeing the concept last year, and Mercedes released a few new specifics today regarding its powertrain.
In keeping with previous information we knew, the CLA is targeting extremely high efficiency of 12kWh/100km, which translates to just 193Wh/mi or 5.2mi/kWh. That’s more efficient than anything else on the road today – with Lucid’s Air Pure reaching 200Wh/mi, or 5mi/kWh. And just less than what Tesla is claiming the Cybercab will be capable of, at 5.5kWh/mi.
Insight Drivetrains & Efficiency Test Bench Sindelfingen 2024
This is thanks to Mercedes’ new compact EDU 2.0 electric motor, which is part of its new Mercedes Modular Architecture (MMA) which will underpin its upcoming electric vehicles. The drive motor will be 200kW on the rear axle, though all-wheel drive models will be available with an additional 80kW unit on the front axle. A two-speed transmission will ensure efficiency at high speeds and low.
For more efficiency in cold weather, the CLA will use an air-to-air heat pump which is able to capture heat from the motor, battery, and ambient air to heat the cabin. While batteries and motors don’t make nearly as much waste heat as inefficient ICE engines, it’s still good to be able to channel heat to wherever you need it.
Mercedes says that the CLA will come equipped with a choice of two different batteries, each with different chemistries.
The larger 85kWh model will be capable of an unnecessarily-high 750km (466mi) of WLTP range – though WLTP numbers are always higher than EPA numbers, so expect something in the high-300s in EPA parlance. This battery will add silicon oxide to the anode for higher energy density, a technology that has been pioneered by Sila Nanotechnologies, a company which Mercedes is a lead investor in.
The smaller battery will be 58kWh, and will use lithium iron phosphate (LFP) chemistry. LFP is a cheaper but lower energy density technology, with higher long-term durability and simpler sourcing of minerals (it uses no cobalt, whereas Mercedes says cobalt has been “reduced” in the larger batteries). However, LFP generally has slower fast charging and cold weather performance.
On charging: the “premium” battery will have an 800V configuration capable of up to 320kW charging speeds. Mercedes says this can add 300km (186mi) of range in 10 minutes, and also says that the car will have a broad charging curve, which means you’ll get high charge rates even if the battery isn’t close to empty. It didn’t specify if the smaller LFP battery will have the same charge rate.
This high charging rate allowed Mercedes to set a record traveling 3,717km (2,309mi) in 24 hours at the Nardo test track in Italy in a pre-production CLA. That’s an average travel rate of 96mph – including time spent charging.
We also learned something about Mercedes’ NACS adoption plans. While just about everyone has committed to transitioning cars to NACS, it has taken longer than expected (largely due to Tesla’s chaotic CEO firing the whole supercharger team for little reason), and few cars have native NACS inlets yet. Some brands can already charge at Superchargers with adapters, but Mercedes is still on Tesla’s “coming soon” page.
Mercedes’ skateboard platform – EU charging port shown
As a result of delays in onbaording automakers, some seem to have pulled back on their plans, pushing NACS ports to later model years. But Mercedes has a new and unique solution – it will just put both CCS and NACS ports on the CLA, right on top of each other.
Mercedes says “in the future, new entry-level models will be capable of bidirectional charging,” but isn’t clear whether this model will be capable of that.
Electrek’s Take
While this is short of a full release of specs, we’re excited by what we see here. Mercedes seems to confirm that they’re meeting the efficiency goals they set out, and we like that they’re offering a variety of options and taking advantage of some newer EV tech like 800V charging infrastructure.
The inclusion of both NACS and CCS is very interesting, again offering options to owners during the transition. That seems to be the big message from Mercedes here – we’re not going to just pick one tool, we’re going to use all of them.
But pricing and availability are obviously big questions, as is design.
The concept looks fantastic, but concepts always change on their way into production. The shape of the camouflaged test vehicle is very different – but looks to have some shrouding on the front and back to hide its shape, so we’ll have to wait until we see this thing unveiled for more.
And as for pricing – Mercedes says the CLA will be an “entry-level” car, but who knows what that means anymore these days. The base ICE CLA starts at around $44k currently, so lets see if they can hit that number.
Charge your electric vehicle at home using rooftop solar panels. Find a reliable and competitively priced solar installer near you on EnergySage, for free. They have pre-vetted installers competing for your business, ensuring high-quality solutions and 20-30% savings. It’s free, with no sales calls until you choose an installer. Compare personalized solar quotes online and receive guidance from unbiased Energy Advisers. Get started here. – ad*
FTC: We use income earning auto affiliate links.More.
Annealed neodymium iron boron magnets sit in a barrel at a Neo Material Technologies Inc. factory in Tianjin, China on June 11, 2010.
Bloomberg | Bloomberg | Getty Images
Rare earth magnet makers are having a moment as Western nations scramble to build domestic “mine-to-magnet” supply chains and reduce their dependence on China.
A turbulent year of supply restrictions and tariff threats has thrust the strategic importance of magnet manufacturers firmly into the spotlight, with rare earths surging toward the top of the agenda amid the U.S. and China’s ongoing geopolitical rivalry.
Magnets made from rare earths are vital components for everything from electric vehicles, wind turbines, and smartphones to medical equipment, artificial intelligence applications, and precision weaponry.
It’s in this context that the U.S., European Union and Australia, among others, have sought to break China’s mineral dominance by taking a series of strategic measures to support magnet makers, including heavily investing in factories, supporting the buildout of new plants, and boosting processing capacity.
The U.S. and Europe, in particular, are expected to emerge as key growth markets for rare earth magnet production over the next decade. Analysts, however, remain skeptical that Western nations will be able to escape China’s mineral orbit anytime soon.
“Frankly, we were the solution to the problem that the world didn’t know it had,” Rahim Suleman, CEO of Canadian group Neo Performance Materials, told CNBC by video call.
Photo taken on Sept. 19, 2025 shows rare-earth magnetic bars at NEO magnetic plant in Narva, a city in northeastern Estonia.
“The end-market is growing from the point of physics, not software, so therefore it has to grow in this way,” he continued. “And it’s not dependent on any single end market, so it’s not dependent on automotive or battery electric vehicles or drones or wind farms. It’s any energy-efficient motor across the spectrum,” Suleman said, referring to the demand for magnets from fast-growing industries such as robotics.
His comments came around three months after Neo launched the grand opening of its rare earth magnet factory in Narva, Estonia.
Situated directly on Russia’s doorstep, the facility is widely expected to play an integral role in Europe’s plan to reduce its dependence on China. European Union industry chief Stéphane Séjourné, for example, lauded the plant’s strategic importance, saying at an event in early December that the project marked “a high point of Europe’s sovereignty.”
Neo’s Suleman said the Estonian facility is on track to produce 2,000 metric tons of rare earth magnets this year, before scaling up to 5,000 tons and beyond.
“Globally, the market is 250,000 tons and going to 600,000 tons, so more than doubling in ten years,” Suleman said. “And more importantly, our concentration is 93% in a single jurisdiction, so when you put those two factors together, I think you’ll find an enormously quick growing market.”
‘Skyrocketing demand’
To be sure, the global supply of rare earths has long been dominated by Beijing. China is responsible for nearly 60% of the world’s rare earths mining and more than 90% of magnet manufacturing, according to the International Energy Agency.
A recent report from consultancy IDTechEx estimated that rare earth magnet capacity in the U.S. is on track to grow nearly six times by 2036, with the expansion driven by strategic support and funding from the Department of Defense, as well as increasing midstream activity.
Magnet production in Europe, meanwhile, was forecast to grow 3.1 times over the same time period, bolstered by the EU’s Critical Raw Materials Act, which aims for domestic production to satisfy 40% of the region’s demand by 2030.
Regional composition of rare earths and permanent magnet production in 2024, according to data compiled by the International Energy Agency.
IEA
John Maslin, CEO of Vulcan Elements, a North Carolina-based rare earth magnet producer, told CNBC that the company is seeking to scale up as fast as possible “so that this fundamental supply chain doesn’t hold America back.”
Vulcan Elements is one of the companies to have received direct funding from the Trump administration. The magnet maker received a $620 million direct federal loan last month from the Department of Defense to support domestic magnet production.
“Rare earth magnets convert electricity into motion, which means that virtually all advanced machines and technologies—the innovations that shape our daily lives and keep us safe—require them in order to be operational,” Maslin told CNBC by email.
“The need for high-performance magnets is accelerating exponentially amid a surge in demand and production of advanced technologies, including hard disk drives, semiconductor fabrication equipment, hybrid/electric motors, satellites, aircraft, drones, and almost every military capability,” he added.
Separately, Wade Senti, president of Florida-based magnet maker Advanced Magnet Lab, said the only way to deliver on alternative supply chains is to be innovative.
“The demand for non-China sourced rare earth permanent magnets is skyrocketing,” Senti told CNBC by email.
“The challenge is can United States magnet producers create a fully domestic (non-China) supply chain for these magnets. This requires the magnet manufacturer to take the lead and bring the supply chain together – from mine to magnet to customers,” he added.
BYD is closing the gap between gas pumps and EV chargers. A new video shows one of its EVs gaining nearly 250 miles (400 km) of range in just five minutes.
BYD’s 5-minute EV charging matches refuel speeds
“The ultimate solution is to make charging as quick as refueling a gasoline car,” BYD’s CEO, Wang Chuanfu, said after unveiling its new Super e-Platform in March.
Chuanfu was referring to the so-called “charging anxiety” that’s holding some drivers back from going electric. BYD’s Super e-Platform is the first mass-produced “full-domain 1000V high-voltage architecture” for passenger vehicles.
BYD also launched its Flash Charging Battery during the event, with charging currents of 1000A and a charging rate of 10C, both new records.
Advertisement – scroll for more content
The ultra-fast charging battery can deliver 1 megawatt (1,000 kW) of charging power, which BYD claims enables EVs equipped with the setup to regain 400 km (248 miles) of CLTC driving range in just 5 minutes of charging.
BYD CEO Wang Chuanfu unveils Super e-Platform with Flash Charging Battery enabling EVs to add 400 km of range in 5 minutes (Source: BYD)
With the new models rolling out across China, we are getting a look at the ultra-fast charging speeds in action. A video posted on X by user Dominic Lee shows BYD’s EV charging at up to 746 kW, with an estimated charging time to 70% of around 4 minutes and 40 seconds.
BYD’s charging station in China, 400km in 5 minutes!
In just six minutes, BYD said the Han L, based on its Super e-Platform, can recharge from 10% to 70%, and in 20 minutes, the battery can be fully charged.
The Tang L SUV, also based on BYD’s 1000V architecture, can add 370 km (230 miles) of range in 5 minutes, while a full charge takes about 30 minutes.
BYD said its Flash Charging Battery enables EVs to gain the same range as a gas-powered vehicle would at the pump, “ultimately making the charging time as short as refueling time.”
Although 400 km (250 miles) is more than enough range for most drivers, BYD is out to make gas stations a thing of the past. And it’s not just in China, BYD plans to bring its Flash Charging system to Europe and likely other overseas markets.
FTC: We use income earning auto affiliate links.More.
A Tesla drove in the wrong direction, resulting in a head-on collision with another vehicle, during a livestream, demonstrating Tesla’s ‘Full Self-Driving’ features.
Earlier this year, Tesla launched its Level 2 driver-assist system, ‘Full Self-Driving’ (FSD), in China.
Like in the US, despite its name, the system requires constant driver supervision. Unlike in the US, China quickly made Tesla change the name of the system as it was judged not representative of its capabilities.
Many Tesla owners in China have been enthusiastically livestreaming their drives using FSD on platforms such as Douyin (TikTok).
Advertisement – scroll for more content
They try to demonstrate that Tesla FSD is able to operate the vehicle by itself and compare it to other similar systems from other automakers in China.
Last week, a Douyin user going by 切安好 was livestreaming a Tesla FSD drive in his Model 3 when the vehicle went into the left lane, which was for the opposing traffic, and collided head-on with another car.
The livestream itself wasn’t widely popular, but the Tesla owner posted video captures of the aftermath, which quickly went viral:
Fortunately, no one was critically hurt during the crash.
Many questioned whether FSD was active during the incident, and the driver initially didn’t release the crash footage as he claimed to be seeking direct compensation from Tesla, which isn’t likely.
The automaker always states that it is not responsible for its FSD or Autopilot systems.
The Tesla driver has now released the footage, which clearly shows that FSD was active during the crash and initiated the lane change into the wrong direction:
The crash highlights the dangers of being overconfident in Tesla’s autonomous driving features.
Electrek’s Take
Be safe out there. Some people are abusing driver assistance features and are a danger to all road users.
Tesla isn’t helping with its own marketing, encouraging abuse with claims that FSD “gives you time back” as if you don’t have to be supervising the system all the time.