Published
9 months agoon
By
adminThis article was featured in the One Story to Read Today newsletter. Sign up for it here.I. Supply and Demand
Here, in the third decade of the 21st century, the most sought-after ammunition in the U.S. arsenal reaches the vital stage of its manufacturethe process tended by a young woman on a metal platform on the second story of an old factory in rural Iowa, leaning over a giant kettle where tan flakes of trinitrotoluene, better known as the explosive TNT, are stirred slowly into a brown slurry.
She wears a baggy blue jumpsuit, safety glasses, and a hairnet. Her job is to monitor the viscosity and temperature of the mixan exacting task. The brown slurry must be just the right thickness before it oozes down metal tubes to the ground floor and into waiting rows of empty 155-millimeter howitzer shells, each fitted at the top with a funnel. The whole production line, of which she is a part, is labor-intensive, messy, and dangerous. At this step of the process, both the steel shells and the TNT must be kept warm. The temperature in the building induces a full-body sweat in a matter of minutes.
This is essentially the way artillery rounds were made a century ago. Each shell is about two feet high and six inches wide, and will weigh 100 pounds when filled with the explosive. At the far end of the production line, after the shells are filled and fitted with a fuseor, as the military has it, a fuzethe rounds, hundreds of them, are loaded on railcars for the first step in their journey to war. Each train carries such a large concentration of TNT that theres a solid concrete barrier, 20 feet high and 20 feet wide, between the rails and the building. The finished shells are delivered from plant to port by rail and by truck, under satellite surveillance.
The young woman works in the melt-pour building. It is the tallest structure on the grounds of the Iowa Army Ammunition Plant, which sits on 30 square miles of prairie, forest, and brush in the southeastern corner of the state, not far from the Mississippi River. Built in 1940, its a relic. Its also currently the only place in America for high-volume production of 155-millimeter artillery shells, the key step of which is known as LAP (for loading, assembling, packing)turning empty shells into live ordnance. The building looks perfectly mundane, like many old factories in rural towns. Theres only one clue to whats going on inside: giant chutes, like water slides, slope down to the ground from the upper floors. These are for escape, although one doubts that anyone could clear the blast radius of a building where TNT is stored in tons. There hasnt been a serious accident at the Iowa plant in years, but 70 names are inscribed on a memorial at the entrance for men and women killed on the job, most of them by explosions.
The Iowa production line is at once essential and an exemplar of industrial atrophy. It illustrates why the richest military on Earth could not keep up with the demand for artillery ammunition after Russia invaded Ukraine in February 2022. At that time, the U.S. was manufacturing about 14,000 shells a month. By 2023, the Ukrainians were firing as many as 8,000 shells a day. It has taken two years and billions of dollars for the U.S. to ramp up production to 40,000 shells a monthstill well short of Ukraines needs. A big part of the reason is that we still make howitzer rounds the way our great-grandparents did. There are better, faster, safer ways. You can watch videos online of automated plants, for example, operating in Europe. Some new American facilities are starting up, but they are not yet at capacity.
The problem isnt just howitzer shells. And it isnt only that the U.S. cant build drones, rockets, and missiles fast enough to meet the needs of Ukraine. America itself lacks stockpiles of the necessary components. A massive rebuilding effort is now under way, the largest in almost a century, but it will notcannothappen fast. And even the expanded capacity would not come close to meeting requests the size of Ukraines, much less restore our own depleted reserves. Take drones, for instance. In December 2023, Ukraines president, Volodymyr Zelensky, called for the domestic production of 1 million annually to meet war needsand Ukraine has met that goal. In the meantime, the supply of drones provided by the U.S. to Ukraine has numbered in the thousands, and many of those have not fared as well on the battlefield as Ukraines homemade, often jerry-rigged models and off-the-shelf Chinese drones. Other allies have stepped up with materiel of many kindsartillery, armored vehicles, aircraftbut fighters in Ukraine are still coping with disabling shortages.Its a miracle the U.S. military has anything that blows up, ever.
At stake here is more than the fate of Ukraine. As a new administration prepares to take powerled by a man, Donald Trump, who has been hostile to Zelensky and his countrys cause, and who admires Russia and Vladimir Putinthe future of American aid to Ukraine is at best uncertain. It could very well diminish or even come to an end. But the obstacles the U.S. has faced in trying to supply Ukraine during the past two years have revealed a systemic, gaping national-security weakness. It is a weakness that afflicts the U.S. military at all levels, and about which the public is largely unaware. The vaunted American war machine is in disarray and disrepair.
Shocking is not overstating the condition of some of our facilities, said Representative Donald Norcross, chairing a House Armed Services subcommittee hearing on munitions manufacture a month after the Russian invasion of Ukraine. Ted Anderson, a retired Army officer who is now a principal partner of Forward Global, a defense consultancy, told me, You would stay awake all night if you had any idea how short we are of artillery ammo.
In 2023, the U.S. Army Science Board expressed concern that the nations industrial base may be incapable of meeting the munitions demand created by a potential future fight against a peer adversary. Mackenzie Eaglen, a defense analyst at the American Enterprise Institute (AEI) and one of the authors of the Science Boards report, immersed herself in this world of procurement and manufacturing for nearly a year. When I was done, she told me, the only thing I could think was Its a miracle the U.S. military has anything that blows up, ever.II. What Happened?
This is not just a bump in the road, and it is not just about munitions. The U.S. military, the richest in the world, confronts a deep, institutional deficiency. If that truth is hard to accept, its partly because the reality is so profoundly at odds with our history. In December 1940, President Franklin D. Roosevelt called on America to become the arsenal of democracy. He had the foresight to gear up the arms industry almost a year before the Japanese attacked Pearl Harbor. The war machine then performed astonishing feats. The Navy outbuilt every other country in the world combined, launching more than 1,000 new warships along with fleets of cargo vessels, troop carriers, and tankers. Production of aircraft was even more astonishing. In all the years prior to 1939, only about 6,000 aircraft had been manufactured in America. Over the next five years, American factories rolled out 300,000. They also built 86,000 tanks and more than 2 million trucks. Production of ammunition accelerated so fast that by 1943, there were 2.5 billion rounds on hand, and the volume was creating storage problems. American arms won the war.A Chrysler factory in Detroit producing M3 tanks rather than cars or trucks, 1941 (Library of Congress)
That mighty manufactory was scaled back markedly when the war ended, then geared up once more during the Korean conflict and the Cold War. By 1961, it was again such a colossus that President Dwight Eisenhower warned about the growing influence of the military-industrial complex. This is how many of us think of it still: menacingly big, cutting-edge, professional, vigilant, lethal, and outrageously expensive. The Pentagons nearly $1 trillion annual buget is more than the defense spending of the next nine biggest militaries combined. It is a preposterous sum that pays for an industrial infrastructure that includes mining operations, chemical plants, factories, storage depots, arsenals, ships, trains, aircraft, launching pads, and research labs. It is less an industry than an ecosystem. Today it is global and so complex and mutable that it has become nearly impossible to map.
From the April 2023 issue: Jerry Hendrix on the end of American naval dominance
Leaving aside an enormous privatized service sector that supports government operations, the militarys industrial infrastructure has three overlapping parts. The first and oldest is the militarys own organic industrial base: factories, depots, and arsenals scattered all over America. Some of these, particularly those considered most vital or secret, are owned and operated by the military itself. Most, like the Iowa plant, are so-called GOCOs (government owned, contractor operated). This organic industrial base supplies the basics: ammo, vehicles, equipment.
The second part of the industrial war machine is the corporate manufacturing sector, dominated today by the Big Five contractors: Lockheed Martin, Northrop Grumman, Boeing, General Dynamics, and Raytheon. These companies enjoy profitable deals to develop and build sophisticated weapons systems.
The third, and newest, part of the war machine is the tech sector, including Microsoft, Google, Amazon, Palantir, SpaceX, Anduril, and a large number of smaller firms. These are responsible for the software and hardware that have become a crucial element of modern wardrones and associated technology, as well as AI and systems for electronic surveillance, communications, data analysis, and guidance. The rapid evolution of drones in the Russia-Ukraine war, where automated attack and defense strategies change almost daily, illustrates how vital the tech sector has become.
Together these sectors support what remains the most potent fighting force on the planet. But the foundation is crumbling. Much has been written about the Pentagons devotion to big, expensive, and arguably outdated weapons platforms: fighter jets, bombers, guided missiles, aircraft carriers. Little notice has been paid to the deterioration of its industrial base, which underpins everything. There are plenty of reasons for what has happened. Strategic planning failed to foresee a sudden demand for conventional arms. The postCold War peace dividend put most military contractors out of business. Budget wars in Congress have created funding uncertainty that dissuades long-term investment in arms manufacture. As for munitions, much of the dirty and dangerous work of making them has been outsourced overseas, to countries where labor is cheap and regulationsenvironmental, safetyare few. Meanwhile, in every kind of military manufacture, from the most to the least sophisticated, we depend for raw materials and componentsuranium, chemicals, explosives, computer chips, spare parts, expertiseon an expansive global supply chain, in some cases involving the very countries (China, Russia) we are most likely to fight.III. A Case Study
The howitzer round , a relatively simple munition, illustrates the problems we face. The howitzer itself is a centuries-old weapon, a mobile firing tube bigger than a mortar and smaller than a cannon. It is often mounted on wheels and is usually used in groups. It is convenient for throwing substantial shells over an armys own forces and into the ranks of a nearby enemy. A 155-millimeter howitzer shell has a blast radius of more than 150 feet, sends fragments even farther, and can damage or destroy vehicles and fortified positions.
Todays howitzer round has a variety of parts, each requiring its own production process. The steel casing is made with a specially formulated alloy called HF-1 (the initials stand for high fragmentation), designed to withstand the tremendous pressure of being shot out of a cannon but also frangible enough to shatter into shards when it explodes at the target. Most of this kind of steel is imported from Japan and Germany, but some of it also comes from China. Into each steel casing is poured explosive materialwhat the military calls energeticsthat today is generally TNT: 24 pounds of it per round. Currently, no TNT is manufactured in the U.S. Nearly all of what we use is imported from Poland and is made with chemical precursors from other countriesincluding, again, China. To increase U.S. production tenfold would require 2.4 million pounds of TNT monthly, which is why the military is shifting to a newer explosive, IMX, that will ultimately replace TNT entirely, but not anytime soon. The U.S. already has stockpiles of this material, and more of it is being made: The Army has nearly tripled its IMX order from the Holston Army Ammunition Plant, in Tennessee.
Then theres the need for copper, a band of which is wrapped around the base of each shell to seal it tightly inside the firing chamber; this enables the shell to spin out of the rifled tube, improving its accuracy. To propel the round, there is another energetic at its base, nitrocellulose, which is manufactured at the Radford Army Ammunition Plant, in Virginia. Its chemical ingredients are imported from all over the world. To ignite the propellant, each round has a primer, essentially a small brass cup and a copper pin with its own small amount of explosive powder. At the tip of the round is the fuze, which contains a battery that is activated when the round begins spinning. The small mechanical and electronic components of the fuze determine when and where the round explodes, whether on impact or in the air above the target. Each of these components must be mass-produced, and each has its own complex manufacturing story.Rolls of steel (left) stored at the Scranton Army Ammunition Plant (right) (Hannah Beier / Getty; Aimee Dilger / SOPA / Getty)At the Scranton facility, 155-millimeter howitzer shells drying on a conveyor belt (Aimee Dilger / SOPA / Getty)
Making energetics, in particular, is expensive, difficult, and, traditionally, a major source of pollution. In the U.S., old Army-ammunition plants figure prominently in the more than 600 military facilities the EPA has designated as Superfund sitespriority cleanup areas. Today the Iowa plant is clean enough that the land around it is used for recreational hunting and fishing and is considered a haven for some endangered species. But in years past, after the plant was steam cleaned to prevent the buildup of explosive dust and residue, the streams in nearby Burlington ran pink, which is the color TNT turns when exposed to sunlight. The plant is still regularly steam cleaned, but with strict and expensive runoff controlsthe cost of environmental stewardship is steep. So, on top of other obstacles that stand in the way of a rapid surge in productionnot just of howitzer shells but of any military ordnance and equipmentyou can add the legitimate demands of good government: environmental regulations, safety regulations, and all the built-in safeguards against waste and fraud.
One more thing: Workers capable of handling jobs at the militarys industrial plants dont just walk in off the street. Generally, it takes two years for an average line worker in munitions to be effective, the Science Board report noted. For energetics, that timeline is extended to seven years.
Ramping up existing plants, like the one in Scranton that forges the steel casings for howitzer shells, is done by doubling and then tripling the number of eight-hour work shifts. This has been accomplished in the two years since the invasion of Ukraine; generous overtime benefits and new hires keep plants running around the clock. But the facilities themselves are antiques. A small fire broke out at the Scranton Army Ammunition Plant in September, forcing the evacuation of the affected building. No one was injured, but the incident raised concerns about vulnerability. Portions of the plant date back to the 19th century. Originally built to maintain rais and railcarsit still sits astride a rail line in the city centerit became a giant steel foundry during the Korean War. Today many of its union workers are long-tenured and are second- and third-generation employees. Its dark and cavernous interiors could be sets for a Hollywood horror movie. Inside are giant vats where heavy billets of HF-1 steel are melted down and stretched into elongated cylinders. Glowing bright orange, they descend on metal rollers one by one to a noisy production line as they gradually cool to a dull gray. Each is then reheated until malleable inside a large device that pounds and tapers the top, creating an aerodynamic, bulletlike contour. To work as intended, the casings must exactly fit the firing tubes, so they are inspected and measured repeatedly along the line. The casings are then buffed to a high sheen. Much of this is hands-on work. Suspended from a wire, each shell passes through a spray-paint station, where the bright surface is coated a dull, army-issue green.
In Iowa, where the casings go for the LAP stage, shells are hoisted one by one onto an assembly line. Workers engrave ID numbers and the initials TNT on each. The shells are then stacked in neat rows on carts that hold about 50. A funnel is placed atop each, and workers guide the carts into a long wooden shed that stretches a few hundred yards to the melt-pour building. On the way, the shells are heated and cooled repeatedly, curing the metal for the TNT pour. One at a time, the carts are rolled into position beneath the melt-pour kettle, two stories above. The slurry flows down through the steel tubes to completely fill each shell. From there, the shells are rolled through a covered walkway to a building where each round is separately X-rayed. Technicians behind computer screens scan each image for imperfections in the pour.When American ships began striking Houthi targets in Yemen in January, they fired more Tomahawks on the first day than were purchased in all of last year.
This painstaking process is eliminated in newer plants in other countries, where TNT is inserted with a more efficient method called screw extrusion, one very thin layer at a time. The process virtually eliminates imperfections. It is not new. The modern form of the process was developed in the 1960s, and is yet another example of how static U.S. production methods have remained. The Army opened part of its first automated shell-production facility in Mesquite, Texas, early this year, and a new LAP plant is under construction in Camden, Arkansas. Crucial expansion of energetics production is under way at Holston, and of propellant production at Radford. Most of these projects are years from being completed. They will require skilled workers and customized new equipment. And once they are all fully operational, which could take years, they will need a lot of energetics. For that, in September 2023, the Army signed $1.5 billion in new contracts. Some of the contracts have gone to companies in the U.S., but others have gone to firms in Canada, India, and Poland.
The Pentagon hopes that this expansion will bring production of 155-millimeter howitzer shells to 100,000 rounds a month by 2026up from the current level of 40,000 a month. NATO countries are also expanding production. All of this will help, but it will also increase competition for scarce minerals and explosives. Poland, for instance, has its own 144-mile border with Russia, and is engaged in its own military buildup. It may be one of the worlds largest manufacturers of TNT, but it isnt going to sell all of it.
Ukraine is also desperately in need of missiles (Javelins, Stingers), anti-missile systems, and rocket-launching platforms such as the High Mobility Artillery Rocket System, better known by its acronym, HIMARS. These are far more sophisticated weapons, and for most of them, American manufacture has been at an all-time low. Production of Stingers, chiefly an anti-aircraft weapon, was off and on until 2023, when the manufacturer, Raytheon, called in retired engineers and production was fully resumed. Production of Tomahawks, the Navys premier cruise missile, is anemic. When American ships began striking Houthi targets in Yemen in January, they fired more Tomahawks on the first day than were purchased in all of last year. The Navy has stockpiles, but clearly that rate of use is unsustainable. And missiles are far more complex than artillery rounds. They require a greater variety of scarce explosives as well as highly intricate electronics. While one howitzer round draws on about 50 different suppliers, a single missile depends on as many as 500, from dozens of countries.
From the June 2023 issue: Anne Applebaum and Jeffrey Goldberg on Ukraines fight against Russia and the future of the democratic world
Imagine, as the Science Board did, that America was drawn unexpectedly into another significant war. If we are years behind meeting the demands of Ukraine, how would we fare if we had to provide naval support and ground troops to defend Taiwan? Or if a NATO country was invaded by Putins Russia? Or if an expanding Middle East conflict draws the U.S. in more deeply? Worried about possible abandonment of Ukraine by Donald Trump, the Biden administration has stepped up deliveries of weapons and equipmentinevitably prompting concerns about the adequacy of our own stockpiles.A Ukrainian soldier fires a howitzer against Russian troops, 2024. (Tyler Hicks / The New York Times / Redux)
Americas lack of preparedness crept up on the country gradually. Ammo production reached a low after 2001, when the 9/11 attacks shifted the militarys focus to al-Qaeda and other nonstate enemies. Arms manufacture had already slowed. Factories were closing. The brevity of the Gulf War, in 1991, when Saddam Husseins army was swept from Kuwait in five days, had reinforced a belief that stocking and maintaining prodigious supplies of weapons and ammunition was no longer needed. Even the years of fighting in Afghanistan and Iraq, after 9/11, mostly involved intelligence, surveillance, and the small mobile infantry units of Special Forces. There was a brief upsurge in the production of heavily armored vehicles to counter mines and roadside bombs in Iraq, but even that long war did not halt the overall downward trend. An official Army history of the American weapons industry, completed in 2010, noted that the current industrial base is the smallest it has been. And it has continued to shrink.
IV. The Last Supper
The hollowing-out of Americas arms-manufacturing capacity is partly a granular story about factories and supply chains and the labor force. The size and complexity of the industrial base are important to understand. But the forces that shape manufacturing efforts in Iowa and Pennsylvania and elsewhere trace back to Washington, D.C. They involve politics, policy debates, military doctrine, expert predictions, taxpayer money, and, ultimately, the application of national will.
The way weve envisagedand planned forfuture wars has led us down a dangerous path. There were always voices warning of the need to anticipate the possibility of a protracted ground war somewhereand warning, too, of the strain that such a war would place on U.S. arms production. For instance, in his 2020 book, The Kill Chain, Christian Brose, a former staff director of the Senate Armed Services Committee, considered how a U.S. clash with China over Taiwanpeer competitors fighting with most, if not all, of the same weaponscould easily erode into a brutal stalemate. Testifying before Congress in 2021, Admiral Philip Davidson, then the retiring head of the U.S. Indo-Pacific Command, cautioned that such a conflict could occur within the next six yearsthe so-called Davidson window.
But U.S. military doctrine emphatically was not focused on fighting or supporting a major ground war, and the prospect of such a war in Europe in the 21st century seemed especially unlikely. So did the potential need for millions of conventional artillery rounds in an age of missiles. It would be as if, after World War II, ther had been a sudden call for mounted cavalry. There was always some bit of a protracted-conflict scenario, Bill LaPlante, the undersecretary of defense for acquisition and sustainment, told me, using strategic jargon for bloody fighting on a massive scale with no end in sight. But the idea that we would be spending or sending to another country 2 million rounds of 155the howitzer shellsI dont think was really thought through. And if someone had raised the possibility, the response would have been: I dont see that scenario.
It is part of the Pentagons job to imagine unlikely scenarios.
War always upends expectations. Generals plot for surprise. And once wars begin, they evolve in unexpected ways. Strategic judgments about future environments are often, one might say predictably, wrong, wrote Richard Danzig, a former secretary of the Navy, in his influential 2011 monograph, Driving in the Dark. Today hes an adjunct senior fellow at the Center for a New American Security (CNAS), a Washington think tank. He was previously a member of the Pentagons Defense Policy Board.
At the Ukraine wars outset, most analysts in the defense community believed that it would last only days or weeks. Russia would roll over its smaller neighbor, oust Zelensky, and install a compliant regime. Instead, the invasion triggered a valiant defense that rallied the Western world. Two years later, the war has evolved into a stalemate, one that has been called World War I with technology. Ukraines army has mounted an effective defense in part by the heavy use of artillery, especially howitzers. LaPlante described a recent tour of World War I battlefields and the immediate resonance he felt with the war in Ukrainethe men dug into trenches, the continual bombardment, the relentless attrition. There had been an assumption, LaPlante said, that stealth and precision weaponry would somehow preclude this type of warfare, but it turns out it didnt.
War planning occurs in a political and strategic context bigger than the Pentagon, which is another reason the U.S. finds itself where it is. Much of the reduction in Americas arms-manufacturing capacity was deliberatea consequence of the collapse of the Soviet Union and the end of the Cold War. In 1993, the heads of some two dozen of the militarys biggest contractors were invited to a dinner at the Pentagon by thenDefense Secretary Les Aspin. Details of the meeting eventually emerged in press accounts. Such a gathering was unusual, and no agenda was announced, so the executives were understandably curious as they were shown into a plain, white-walled dining room off Aspins office.
As a representative from Wisconsin, Aspin had, in 1990, led efforts in Congress to begin shrinking defense spending. The Berlin Wall had come down in 1989. The Soviet Union was fracturing. It was a heady time. The U.S. was no longer squared off against another superpower. Aspin had called for a new kind of defense, and now, with Bill Clinton in the White House, he was charged with shaping it. Everyone at the dinner knew change was coming. No one was sure exactly what it would look like.
Norm Augustine, then the CEO of Martin Marietta and a onetime undersecretary of the Army, was seated next to Aspin at the dinner table. He asked what was going on.
Well, in about 15 minutes youre going to find out, Aspin replied, and you probably arent going to like it.
After the meal, the group was led to a briefing room, where William Perry, Aspins deputy, stood beside a screen and presented the plan: a dramatic reduction in defense spending. Perry explained that there were too many private contractors, and the Pentagon could no longer afford them all. The fallout would be drastic, he said. Charts showed various categories of purchasing. In some, only one contractor would likely be left with enough business to survive.
Augustine paid particular attention to the forecast for the aerospace industry. It showed that out of more than a dozen existing contractors in his field, perhaps only two or three would remain viable. He was stunned. For many of those in the room, it meant their companies were doomed. They would either go out of business or be sold or absorbed by a competitor. Augustine came to refer to the meeting as the Last Supper.
Perry, who would succeed his boss as defense secretary, was not wrong. Within a decade, the number of prime defense contractorslarge companies that typically employ scores of subcontractors on big projectsfell from 51 to five. In terms of personnel, the military shrank by 15 percent. The effect on defense manufacturing was drastic: According to Augustine, the aerospace industry alone lost 40 percent of its employees in the 1990s. Of course, Pentagon spending cuts were not the only factorAmerican manufacturing in general had been in a long decline as lower wages overseas and the effect of free-trade agreements drained jobs away. But the impact of spending cuts was deep.
For the past three decades, the U.S. war machines private sector has been dominated by the Big Five, confirming a 1997 prediction by John Mintz of The Washington Post: By the end of his second term, it may emerge that President Clintons most enduring legacy in national security will be his role in creating a handful of extraordinarily powerful defense contractors. Fewer players meant less competition, and because the five were so big, they undermined one of Americas greatest strengthsits seemingly inexhaustible bounty of bright entrepreneurs with new ideas. The Big Five spent a lot on research and development and had the capacity to rapidly expand if a product took hold, but the galaxy of small entrepreneurial players was diminished. It became harder for start-ups to compete and thus to remain alive.
Some held on by gaming the system. Bill Greenwalt, a defense analyst with AEI, explained to me that many companies became experts at just getting a couple million dollars doing a science project floated by the Pentagon, and then, when that speculative R&D project was done, raising their hand for another. They were accustomed to the concepts they developed going no further. If they did, the next step, turning the idea into a prototype, needed a steeper level of funding. If the concept cleared that hurdle, an even bigger one loomed: winning the funds to expand production. These obstacles became known as the valley of death, because so many promising ideas and even proven prototypes died trying to make the leaps. The Big Five were better positioned to succeed than were smaller upstarts. And the Pentagon, like all large bureaucracies, is inherently cautious. Bigness meant being able to underwrite prototypes and expand production lines quickly. The upshot was both to curtail innovation and to deflect attention away from basic needs.
One of the most famous examples of this dynamic was an unmanned aircraft invented by the Israeli aerospace engineer Abe Karem originally called Albatross, then Amber, and finally the GNAT-750. He won a Pentagon contract in the 1980s to design something better than the drone prototype offered by Lockheed Martin, known as the Aquila. And he delivered, building a machine that cost far less, required just three operators instead of 30, and could stay aloft much longer than the Aquila could. Everyone was impressed. But his prototype vanished into the valley of death. Although it was a better drone, Aquila looked good enough, and Lockheed Martin was a familiar quantity. But Aquila didnt work out. Neither did alternatives, including the Condor, from another of the Big Five, Boeing. Only after years of expensive trial and error was Karems idea resurrected. It became the Predator, the first hugely successful military drone. By then, Karems company had been absorbed into General Atomicsand Karem lost what would have been his biggest payday.
There are hundreds of Abe Karems out there in America today, and they get frustrated by the department, Greenwalt said. They move out to the commercial sector. Every one of those companies, I would argue, has probably got smeone there who met the valley of death in DoD and is now doing something crazy in the commercial marketplace because thats where the money is.
The flow of defense dollars to the Big Five didnt just stifle innovation. It also concentrated a growing share of available dollars into weapons systems of the costliest and least ordinary kind. If there is one major lesson to be drawn from the war in Ukraine, apart from the need for an ability to produce drones, munitions, and missiles fast, its that small and cheap beats big and expensivewhich is the opposite of the assumptions that underlie much of Americas military spending. Drone warfare continues to teach that lesson.
The Pentagon has launched expensive programs, still unfolding, to design and build small drone fleets. Meanwhile, Ukraine and Russia have both been using drones that can be bought off the shelf and adapted to military use, all for a tiny fraction of what the U.S. has spent. With its vibrant tech sector, Ukraine has excelled in configuring commercial drones for the rapidly changing conditions of the battlefield. For instance, the Ukrainians have recently made great strides in autonomous terminal guidancepreprogramming drones with target information so that if the weapon encounters electronic jamming, it will remain on course. Stacie Pettyjohn, the director of the defense program at CNAS, explained that the Pentagon has been working on this technology, toobut with a project that has been years in development and has cost hundreds of millions of dollars. The Ukrainians are doing it for a few thousand dollars in some guys garage, she said.
The same cost disparity is evident in defending against drone attackswhat LaPlante has called the problem of our time. Patriot missiles, which cost $1 million apiece, were not intended for this. The Pentagon is pouring millions into developing countermeasures. But the answers are more likely to come from a tech start-upfrom someone like Abe Karem. Over the past half century, the Pentagon has become more of a buyer than an inventor, but it remains a notoriously deliberate customer. Acquisition procedures, legal requirements, and funding issues slow to a crawl on the path from concept to production.A bulletin board near the furnace area of Scrantons production floor (Michael S. Williamson / The Washington Post / Getty)V. A Loss of Will
As shocking as the Last Supper may have been to industry leaders, the larger policy impulse made senseas much sense as a drawdown did when World War II ended. It was painful, but defense spending has always been a roller coaster. The problem was not the drawdown itself but the structure left in placeheavily corporate in terms of major weapons systems, and yet astonishingly thin in terms of basic manufacturing. If some disasteran accident, an attackbefell the Holston Army Ammunition Plant, the Army would quickly run out of bombs. All American aircraft carriers and submarines today are powered by small nuclear reactors. A single company makes them: BWX Technologies, in Lynchburg, Virginia.
Less money is only part of the issue. Congress controls the funding, and its dysfunction has had a profoundly negative effect on the militarys manufacturing capacity. The decline of the American war machine reflects both corrosive partisanship and a loss of direction and will.
Most of the defense budgetmore than 80 percent of itis essentially allocated before the generals get their hands on it. The budget has, in effect, calcified. Its main expense categories have barely shifted in years. Personnel is the biggest fixed cost, at about 40 percent. The million-person-plus military earns pay and benefits, health first among them. Keeping pace with inflation, those costs steadily grow. More money is spent on health care for military members and their families each year than is spent on building ships. And then theres competition from private employers. Skilled welders, for instance, who have learned their craft in the Navy, can find ready employment in private shipyards when their tour of service endsfor higher pay and greater benefits. Staying competitive with the private sector, Mackenzie Eaglen wrote in a 2022 AEI paper, means the mandatory spending bills get larger every yearwhether the overall budget grows or not. The Pentagon, she reported, spends almost ten billion more on Medicare than on new tactical vehicles, and more on environmental restoration and running schools than on microelectronics and space launches combined. The growth in personnel costs is so large that even when the Army has trimmed its ranks, the budget percentage has not gone down.
From the May 2018 issue: Phil Klay on the eroding morale of Americas troops
Another huge chunk of the budget goes to operations and maintenance, which also increases as equipment ages. Keeping aircraft, ships, tanks, and troop carriers combat-ready is not optional.
The relatively small slice of the Pentagon budget available for other kinds of spendingat most 15 percent, and possibly half that amountis still a lot of money, but competition for it is fierce. The manufacture of munitions, arguably the least sexy budget item, falls prey to the infighting. Would the Pentagon brass rather build a new generation of jets and ships and missiles, or instead notch up production of artillery shells that, under scenarios seen as likely, would never be used? Munitions have become known inside the Pentagon as a bill payersomething that can always be cut in order to make the budget balance.
Meanwhile, timely, coherent federal budgeting is no more. Congress routinely fails to pass appropriations bills on schedule, resorting to continuing resolutions. This keeps defense dollars coming but limits their use to existing projects. That would not be a problem if it happened only occasionally, but Congress has given the defense department a fully authorized budget on time only once in the past 15 years. This helter-skelter process constrains the Pentagon from adapting quickly to changing circumstances. New projects are put on hold, and theres no guarantee that money will eventually come. Private contractors need predictable dollar commitments to invest in new product lines, so they simply dont invest. As one senior Pentagon official described it to me, the phenomenon is an own goal that we do to ourselves every year.The U.S. today could not replicate the achievement of World War II. It could not build trucks and tanks and ships and airplanes in such volume.
When the demand for conventional ammo soared in 2022, established players in private industryskeptical that the war in Ukraine would last long enough to make investment profitablewere reluctant to gear up. Some smaller companies have been tempted to step in but are also nervous about the risk. John Coffman, who owns a small munitions company called Armada Ammunition, based in Greensboro, Florida, is currently eyeing an opportunity to begin manufacturing howitzer ammo. He has hedge funds offering millions for him to begin making the rounds. He knows how to do it and has even lined up suppliers for the raw materials. The demand is clearly therefor the moment. But what happens if it suddenly isnt? Wars do end, or at least subside. Then you have all this machinery and all this product that you just ordered, he says. And no guarantee that Washington will keep your company whole.
Coffmans situation is a microcosm of the one faced by any private manufacturer with military contracts. If Congress wanted to get serious about sustaining the military-industrial base, measures could be devised to give companies a cushion, a guarantee of security. Manufacturers nationwide faced the same dynamic during World War II, and the federal government stepped in and smothered the problem with dollarsefficiency or penny-pinching was not as important as getting the job done. The problem today is not the scale of global war. The way Congress works today would not just cripple arms and ammunition supply in a global war; it would cripple it in war on any scale.VI. Driving in the Dark
Joh Quirk , a former Army officer who is now a senior staffer with the Senate Armed Services Committee, has been tracking the shortage of howitzer shells in particular. He told me that the military has made some progress: What they have done, I would say with large success in the Army and the acquisition community, is the work of a guy by the name of Doug Bush.
Bush appears to be, in the words of one of his friends, the perfect nerd for the job. Slender, prim, graying hair gone white at the temples, he is obsessively smart about abstruse thingsa bureaucrats bureaucrat. He is also the official who made that own goal remark.
Bush is the assistant secretary of the Army for acquisitions, logistics, and technology. It is a mouthful of a title that is usually dispensed with in favor of the spoken acronym ASA(ALT)rhymes with basaltan important but little-known position in the upper echelons of the Pentagon hierarchy. Bush is also the Armys science adviser and senior research and development official. The job is more than just building or buying what he is ordered to supply. It also means obtaining funding from Congress, which is hardly automatic.
Bush knows the Army (he is a West Point graduate and served for five years as an army officer in an infantry unit), andperhaps more importanthe knows Congress (he was a longtime staff member of the House Armed Services Committee). He became ASA(ALT) two weeks before Russia invaded Ukraine. When war came, he and his team began asking the basic questions: How much ammo would Ukraine need? Of what we had, how much would we need to hold back? Could we make more? How fast? Could we keep up with the demand? The answer to every one of these questions was either We dont know or, simply, No.
Bush worked with Congress on special authorities for emergency contracts and helped persuade his old colleagues on Capitol Hill to pass, rapid-fire, a series of supplemental funding bills. One of the biggest challenges was just finding enough explosives. Were going to use all the TNT capacity in the world we can get access to, Bush told me when we spoke at length this summer. But that addresses only short-term requirements. For the longer term, there needs to be major new energetics productionprimarily of TNT and IMXhere in the United States. So thats going to be hundreds of millions of dollars worth of investment that we are going to build out as fast as we can, he said. In November, the Army awarded a contract to build a TNT plant in Kentucky. The U.S. has promised Ukraine more than 5 million artillery rounds, 500 million small-caliber ammo rounds, and much more. It has also committed billions of dollars to replenishing stockpiles for American forces. For all their accomplishments, what Bush and others have done is merely stabilize the patient in the ER. Systemic dysfunction remains.
Bill LaPlante, looking at the future from a different angle than Bush does, sees even more to be concerned about. If the U.S. finds itself on a back foot when it comes to 19th- and 20th-century technology, how will it confront challenges that are even more sophisticated? In his role as undersecretary of defense, he is tasked with making the kinds of predictions he knows not to trust. How does a huge institution that spends billions and employs millions make sound plans if its assumptions are consistently wrong? How do you prepare to be unprepared?
Today the most obvious threat is high-volume firelarge numbers of small, cheap kamikaze drones attacking all at once, swarming and overwhelming defenses. This isnt some futuristic scenario. It is happening in Ukraine. Imagine if the Iranians or Houthis could send 300 drones and missiles against one or two American ships in the Persian Gulf. The Defense Department is at work on ways to defeat such attacksby means of AI-assisted targeting for rapid-fire weapons, for instance, or by directing a strong electromagnetic pulse to destroy the drones robotic controls. Other potential threats include hypersonic missiles, electronic warfare, and cyberattacksand these are only the threats that are known. Just get over the fact that youre not going to predict everything, LaPlante told me. Rather, he advised, we need to plan for adaptability.
LaPlante cited Danzigs Driving in the Dark as a blueprint. He said that its prescriptions for coping with uncertainty are guiding the Pentagons thinking, at least for now. Metaphorically, Danzigs approach departs from the traditional fortress concepta hardened wall of defensesto embrace a more immunological strategy, more like the way the body defends itself against pathogens. New viruses appear, and the body adapts to counter them. Translating that into national defense means preparing to be surprised and prioritizing weapons systems that can, like antibodies, be altered and mass-produced swiftly. It means leaning on software, particularly AI, that can weigh alternatives and repurpose existing assets faster than people can. To counter the effects of the Last Supper, it means emphasizing shorter-term contracts with a more numerous variety of smaller companies, thereby encouraging both competition and innovation. (Cellphones offer an example of this dynamic; theyre designed for the short term because they can so quickly become outmoded.) It means adopting manufacturing methods that can be rapidly repurposed when the need for some product suddenly ends. All of this, taken together, would radically alter the Pentagons status quo and redraw the military-industrial map. Doing so will not be easy. It will require extraordinary cooperation among Congress, the Pentagon, and the private sector.
I think we could, I really do, said General Randy George, the Armys chief of staff, and the person charged with making these decisions, when I asked him this spring if the U.S. was truly capable of pursuing a new strategy and way of doing business. I think it would be painful. People would feel it. But I still am a believer in American ingenuity.General Randy George (center, seated) at the Army National Training Center, Fort Irwin, California, 2024 (Eric Thayer / The Washington Post / Getty)
One experiment George mentioned is the Replicator initiative, which is as much an innovation in process as it is in war-fighting. It draws significantly upon what military experts have learned from Ukraine. As Deputy Defense Secretary Kathleen Hicks explains, it will rapidly produce multiple thousands of autonomous systems, including relatively small, inexpensive drones. These will also have a modular structure capable of being adapted in the field to a variety of ends. Using existing and planned Pentagon funds, the project will rely on a number of small producers to achieve the volume needed. The idea is to enable a faster jump over the steepest obstacle in the valley of death, the one from proven prototype to mass production.
Creating a more varied and competitive field of military contractors means investing in many that will faila high-risk game. Anyone who spends big on arms production needs predictable budgets and certainty of sales. So the Pentagon will have to shoulder some of that risk. And if the government is underwriting the effort, a lot will ride on who is leading the government.
The current push will take a decade or more to become fully functional, and will cost a lot more than even the generous sums Congress has been shelling out piecemeal over the past few years. The costs and risks of the direction LaPlante defines will meet resistance. The Big Five are a powerful lobbying force and will have allies in Congress and possibly in the new administration, whose plans and ambitions, and basic competence, are question marks. As always, there will be a strong penchant to stick with the familiar.VII. The Choice
Even if the current experiments do morph into something permanent, they will represent a change in only one part of the procurement system. They will do nothing to address the fact that our national politics, which traditionally have united around issues of national defense, dont reliably doso any longer. They will not cure congressional dysfunction. They will not change our reliance on foreign supply chains. They will not obviate the need for environmental and safety regulations that add costs and slow down manufacturing. They will not alter the fact that war always confounds expectations, or that people will continue to balk at spending billions based on the proposition What if?
Absent a screaming national emergency, the U.S. has never been good at steering steadily in a clear strategic direction. The system for equipping the war machine is peacetime designed, Douglas Bush explained. The basis of it is not built for war.
One thing the U.S. should definitely do, he believes, is to stop thinking of America as the arsenal of democracy. Perhaps in theory we could go it alonecould press whats left of our manufacturing capacity to the single end of self-sufficient military production. But going it alone is not really an option. The task of supplying, running, and maintaining a modern war machine is beyond the capacity of any one nation. Starting from scratch and given three years to do it, the U.S. today could not replicate the achievement of World War IIcould not build trucks and tanks and ships and airplanes in such volume. When we spoke, Bush suggested that it might be better to start thinking about an arsenal of democraciesthat is, multinational partnerships among the major democracies, with America playing the major role. It would be maddening and messy and require immense energy devoted just to muddling through.
He didnt mention the underlying premise: For the idea to work, we need to have democracies. And they need to stick together.

You may like
Sports
Week 3 takeaways: Texas A&M’s off to a hot start; UCLA … not so much
Published
7 mins agoon
September 15, 2025By
admin
Week 3 brought exhilarating last-minute wins, disappointing losses and two coaches getting fired Sunday.
Notre Dame dropped 16 spots to No. 24 in this week’s AP poll following a 41-40 loss to Texas A&M, which rose six spots to No. 10 on the strength of a 3-0 start. No. 2 Penn State has gone through the first three weeks with ease as it faced non-Power 4 opponents, and No. 4 Miami quarterback Carson Beck showed just how fun it is to play for the Hurricanes.
After starting the season 0-2, do the Fighting Irish stand a chance to make the 12-team College Football Playoff? After years of not getting the results it had hoped for, is Texas A&M reaping the benefits of its transfer portal additions? What does Penn State have to look forward to after its bye week in Week 4?
Our college football experts break down key takeaways from Week 3 performances.
Jump to:
Notre Dame’s CFP hopes | Texas A&M
UCLA | Beck having fun again
Penn State’s road | Stockton delivers
Vols’ QB swap
Could Notre Dame still make the playoff?
Notre Dame has lost control of its playoff path. Following an 0-2 start, the Irish are out of the playoff conversation and need perfection — and help — to get back into it. This is where being an independent hurts Notre Dame in the playoff era. The five highest-ranked conference champions are guaranteed spots in the playoff, which is why three-loss ACC champion Clemson was able to sneak in last season. Without the chance at a conference title, Notre Dame has 12 games to impress the selection committee — and its best opportunities to do that are already gone.
Even if Notre Dame were able to run the table — the way it did last year following the shocking home loss to Northern Illinois in Week 2 — it’s going to have a difficult time winning a debate against other two-loss teams with better résumés. And if Texas A&M and Miami don’t win their respective conferences, they would have the head-to-head edge on the Irish in one of several tiebreakers the committee uses to determine its at-large teams. — Heather Dinich
Texas A&M’s starting to cash in where it counts
Texas A&M often gets knocked for the contrast between its deep pockets and its mostly empty trophy case. No major program has spent more and reaped less over the decades. The Jimbo Fisher hire and subsequent firing and record payout — after no CFP appearances, SEC titles or 10-win seasons — is emblematic of the program’s financial failures.
But Texas A&M’s investments, both in coaches and players, are starting to pay off, and the program could finally start approaching its potential. The Aggies kicked down one important door, as coach Mike Elko put it, by stunning Notre Dame 41-40 on Saturday night. They did so largely with the help of transfers, including wide receivers Mario Craver (Mississippi State) and KC Concepcion (NC State), and tight end Nate Boerkircher, who had one touchdown catch in four seasons at Nebraska but hauled in the winner at Notre Dame on fourth-and-goal from the 11-yard line.
Craver, who had 368 receiving yards at Mississippi State and has a slight build at 165 pounds, wasn’t seen as a major pickup but has 443 receiving yards and four touchdowns through the first three games. He had 207 yards against Notre Dame, while Concepcion, ranked as ESPN’s No. 25 transfer, added 82 yards on four receptions.
“We felt like we would win outside,” Elko said.
The transfers also have brought a different mentality.
“One thing I said on the sideline, second-and goal or third, even, I looked at [tight ends coach Christian Ellsworth] and said, ‘I have no doubt we’re going to win this game,'” Boerkircher said.
Elko shared the belief. Although the end of his first season resembled so many at Texas A&M, there are signs things are shifting in Aggieland.
“Hopefully, what they’ll take from the game is, if they find a way to execute better, they can be something really special,” he said. — Adam Rittenberg
UCLA is a disaster
When UCLA opted to leave the Pac-12 and head to the greener pastures of the Big Ten, it was a decision rooted in money and football. At the time, maybe it was possible to reason that with a full share of the Big Ten media deal, there would be enough money to help the Bruins at least be competitive in their new conference. Keep in mind, they had not won a conference title in the Pac-12 since 1988. What has played out since then has been nothing short of an embarrassment for the school.
The Bruins’ latest setback came Friday night as they were demoralized in a near-empty Rose Bowl by New Mexico — a school that wasn’t even invited to the new-look Pac-12. It was UCLA’s second straight loss to a Mountain West team and delivered a clear verdict that DeShaun Foster was not fit to continue as the head coach. His firing became official Sunday morning.
According to ESPN Analytics, UCLA will be a heavy underdog in all 10 of its Big Ten games this season, with ESPN’s matchup predictor identifying its game against Maryland as the best shot at a win (34%). Under Chip Kelly in 2018, UCLA equaled its record for losses in a season (nine). This team has a chance to sail past that number. — Kyle Bonagura
Beck having fun again
South Florida quarterback Byrum Brown came into the Miami game as the dual-threat quarterback with the ability to make big plays in a variety of ways.
But what if we told you it was Miami quarterback Carson Beck who ended up finishing with more rushing yards? Miami ran Beck on designed runs more often Saturday than the first two games this season. In all, Beck had six runs for 28 yards and a score, becoming the first Miami player in the past 30 seasons to have three passing touchdowns and one rushing touchdown against an AP-ranked opponent.
The Miami defense, meanwhile, keyed on Brown and made his day far more difficult in a 49-12 win. Brown had 13 carries for 2 yards. If you don’t count the two times he was sacked and lost 16 yards, he had 11 carries for only 18 yards. In his first two games, Brown had 109 yards rushing and two scores.
Beck said during the week, coaches noticed that there would be opportunities for him to run more based on what the USF defense showed on tape.
“We knew that they were going to blitz the edges, try to defeat our run game, so [that] created some opportunities for me to be able to use my legs a little bit,” Beck said. “It’s just what was called for, and whatever coach needs me to do, I’m going to do, so glad I was able to showcase that a little bit tonight.”
Headed into the season, there were questions about Beck coming off an elbow injury that required surgery last December. Though he did not start throwing again until June, he has a comfort level in the offense and a chemistry with his receivers that has made his first three games look seamless.
Against USF, he threw for a season-high 340 yards, and for the season he has completed 78.3% of his passes, with seven touchdowns to two interceptions. Both picks came against USF — though one was the result of a miscommunication with his receivers. Still, for a quarterback who was largely written off after the season he had at Georgia in 2024, watching Beck take command of the Hurricanes and have fun again has been one of the biggest stories of the young season for the Hurricanes.
“I’m a Florida boy at heart, and just being here with these guys, I really fit in,” said Beck, who is from Jacksonville. “We have good people on this team that care and are genuine and it’s real love and brotherhood. A lot of teams across the country say that, but they don’t live it. And I really, truly believe that we live that, and it allows you to just be free and have fun on the field.” — Andrea Adelson
Penn State’s real season about to begin
The Penn State Nittany Lions, ESPN’s preseason No. 1 team, have flown under the radar through the first three weeks of the season. But that’s only because they’ve faced three non-Power 4 opponents (Nevada, Florida International, Villanova) and defeated them by a combined score of 132-17.
Now comes a bye — followed by a white-out, prime-time clash at Beaver Stadium against No. 6 Oregon on Sept. 27. A month later, on Nov. 1, the Nittany Lions travel to Columbus to face top-ranked Ohio State. The Ducks have been dominant. The defending national champion Buckeyes already have a win over Texas under their belt. And those two games will reveal whether Penn State looks the part of a true national championship contender.
So far, it has been smooth sailing for the Nittany Lions. The talented defense looks legit under new coordinator Jim Knowles. The running game remains awesome behind veteran backs Kaytron Allen and Nicholas Singleton. Even transfer receivers Trebor Pena (Syracuse) and Kyron Hudson (USC) have impressed.
But the Nittany Lions are about to be tested — and their chance is coming to make a statement. — Jake Trotter
Stockton proving he was the right choice
Kirby Smart was in a tough spot in late December. His Georgia squad was preparing for the Allstate Sugar Bowl against Notre Dame. Carson Beck was out for the season and hadn’t yet announced whether he’d go pro. Gunner Stockton was preparing for his first career start leading the SEC champs. Cal transfer quarterback Fernando Mendoza was still available in the transfer portal.
Do you stick with the QB2 who has been in your program for three years or go get the proven starter with early-round NFL draft pick potential?
Smart was feeling pretty darn good about his decision Saturday afternoon. Stockton’s first SEC road start was as tough as it gets, but he didn’t flinch in the 44-41 overtime triumph over Tennessee. He put up 304 passing yards and 48 rushing yards (excluding sacks) and answered any doubts by leading a comeback win in a hostile environment. His 75-yard drive in the fourth quarter, rallying the Bulldogs back from an 8-point deficit with a perfectly thrown touchdown to London Humphreys on fourth-and-6, told everybody he was ready for the moment.
“I thought he grew up tonight,” Smart said. “He grew up a lot.”
We’re watching plenty of first-year starters, such as Arch Manning, Ty Simpson, CJ Carr and Austin Simmons, go through the ups, downs and growing pains of attempting to play and lead at a consistently high level. Stockton is going to have those moments too, with five more games on the schedule against teams currently in the AP Top 25. But if this is what he’s capable of after only four career starts, it’s hard not to be optimistic about the trajectory of Stockton and the Bulldogs’ offense moving forward. — Max Olson
QB swap looking good for Vols
Tennessee might owe UCLA a few players to be named later from its offseason quarterback trade. Vols quarterback Joey Aguilar, who left UCLA after former UT starter Nico Iamaleava enrolled there, has emerged as one of the top passers in the SEC.
While the Volunteers were on the short end of a 44-41 loss in overtime to Georgia on Saturday, Aguilar more than proved himself against what was supposed to be one of the SEC’s best defenses. He completed 24 of 36 passes for 371 yards with four touchdowns and two interceptions. Aguilar became the first SEC player in the past 20 seasons to have four passing touchdowns and a running score in his conference debut, according to ESPN Research. He threw three long touchdowns to receiver Chris Brazzell II and ran for another score. In three games, Aguilar has completed 66.3% of his attempts for 906 yards with nine touchdowns and two interceptions.
Meanwhile, Iamaleava continues to struggle with the Bruins, who fired coach DeShaun Foster on Sunday. He threw for 217 yards with one touchdown and one interception on 22-for-34 passing in a 35-10 loss to New Mexico on Friday night. – Mark Schlabach
Sports
Who are MLB’s teams to beat this October — and who could take them down? Execs, insiders weigh in
Published
7 mins agoon
September 15, 2025By
admin
-
Jesse RogersSep 15, 2025, 07:00 AM ET
Close- Jesse joined ESPN Chicago in September 2009 and covers MLB for ESPN.com.
The MLB playoffs are just around the corner and shaping up to be a wide-open affair. For the second consecutive season, there is not a single team on pace to win 100 or more games. That means there is plenty of parity across the majors, which is bound to carry over to October.
With that in mind, we asked 19 baseball players, executives and scouts: Who is the team to beat in the National League? And who is the team to beat in the American League?
There was little uniformity to their answers, though most agreed on one thing: a sleeper team that people in both leagues agreed could make a run in October. Here’s how those in the game view the upcoming postseason.
The NL’s team to beat is …
(Phillies, 5; Dodgers, 4; Padres, 2; Mets, 1)
Voting was as tight as you might imagine, considering the Brewers are mixed in with the defending champion Dodgers and high-priced Phillies. Those teams dominated our poll, leaving few votes for anyone else.
All three teams can slug their way to the World Series, but the Dodgers have a distinct advantage in the power game, outhomering both Philadelphia and Milwaukee by a wide margin this regular season. However, Philly employs easily the best closer of the three — a crucial element that could help finish off those tight October games.
Still, it was the Brewers who won our poll because they’ve played at such a high level in all areas while also possessing a deep and healthy starting staff.
Why the Brewers
NL player: “They seem like a team that has a really solid plan and cohesive approach. And they seem like they’re on the same page. I just like how they play. And they’ve done it all year; why can’t they keep it going?”
NL scout: “They still have to figure out the back end of their pen, but in a short series, they have the luxury of sending one of their good starters to the bullpen. And they might just run into enough home runs to keep pace in October.”
NL exec: “Getting the bye will be huge for them. They’ve been knocked out in those short series several times; this will let them breathe a bit. Plus, their starting staff is so good. If I’m Milwaukee, I want the longer series.”
Biggest threats to Brewers
NL player: “It’s simple for me. They still have good pitching, and they’ve been there before. Playoffs are about home runs, and they can hit them.”
NL player: “Their lineup is a little top-heavy, but they have enough at the bottom that can do the job. If those guys show up, then that lineup is really good. Their pen is incredible with [Jhoan] Duran.”
NL exec: “It’s their last hurrah, right? They have older players, some of whom will be free agents at the end of the season. I just can’t see [Bryce] Harper going his career without a ring, and this is their best chance, even without [Zack] Wheeler.”
NL player: “When we played them, they didn’t have a good series, but they seem to turn it on when they need to. That’s the sign of a champion. I think their offense will have a big October and lead them like it did last year.”
NL exec: “Talent will win out, and they have the potential for healthiest pitching staff all year in October.”
If not Milwaukee, Philadelphia or Los Angeles, then who?
Truth be told, these insiders responded before the latest Mets free fall became so dramatic — New York was on an eight-game losing streak that ended with an extra-innings win over Texas on Sunday. But, hey, anyone can get hot at the right time, right? The Mets proved that last year. But they have to prove they can even get into the October party before they can think about making a deep run.
The Padres are hard to figure out, but that doesn’t make them less dangerous than any other contender. Some days, their offense goes into hibernation, but they can shut anyone down in the late innings. Their bullpen is that good and could take them far despite the loss of Jason Adam.
NL player: “I like San Diego. They’re hungry. They made all the right deadline moves. And they have the experience of getting close but not going all the way.”
NL exec: “There’s a lot to like about San Diego, but they can still be pitched to even with their deadline additions. It’s like they disappear sometimes. If they survive a wild-card round and get some home games, Petco [Park]’s energy could wake them up. Still a great bullpen.”
NL player: “The Mets are really good. I know they’ve struggled, but I’m banking on them getting hot like they did last postseason. Sometimes you get your worst baseball behind you, then find your groove. I like the Mets to do that.”
NL scout: “Their lineup 1-9 has to carry them. I’m not sure how they’ll piece it together on the mound, but sometimes you find rookie magic in an arm or two. If two of [Nolan] McLean, [Jonah] Tong and [Brandon] Sproat can come through, why not the Mets?
The AL’s team to beat is …
(Tigers, 5; Yankees, 3; Red Sox, 3; Astros, 2)
The voting was even tighter in the AL than in the NL — four teams received three or more votes — but it was the Blue Jays who edged out the competition with just one more vote than Detroit.
Home-field advantage could make the difference for the AL’s top two teams, both of whom dominate at home but hover around .500 on the road. The Tigers play so well at Comerica Park, where they are able to run rampant on the bases and go first to third on teams. And, of course, they feature Tarik Skubal at the top of their rotation. Meanwhile, the Blue Jays can get the newly renovated Rogers Centre rocking as hard as any stadium in the majors. That top seed in the AL is up for grabs down the stretch — and one of these two teams is highly likely to get it.
Why the Blue Jays
AL player: “They’re one of the most rounded teams in the AL. They have some experience, especially in the rotation, and have a little bit of everything in the lineup. That’s tough to contend with in a series. I just think they have the most complete team.”
AL scout: “As good as [Bo] Bichette, Vlad [Guerrero Jr.] and [George] Springer have been, it’s the contributions from guys from the left side of the plate like [Nathan] Lukes and [Addison] Barger which make Toronto really dangerous. They have some balance, which has eluded them.”
AL exec: “I love their team, but I question their bullpen. It hasn’t been very stout in the second half. Tommy Nance might be a guy to lean on.”
Biggest threat to Blue Jays: Detroit Tigers
AL player: “Detroit is high up on that list [of teams to beat]. They know how to win. That’s the biggest thing. They proved that last offseason. And they’ve turned that park into a nice home-field advantage. I know they go first to third better than anyone. That’s a key, playing in that ballpark.”
AL scout: “Sometimes seeing a team play a lot you can get a more negative opinion than what their record is, and sometimes it can be a more positive opinion than their record. With the Tigers, it’s the latter. And they already have a pretty good record.”
AL exec: “I’ve tried to fill out playoff rotations without a true ace. It’s really tough. So having Tarik Skubal makes all the difference for me. Unless he runs out of gas, Detroit is my pick.”
If not Toronto or Detroit, then who?
A case can be made for any of the wild-card entrants — depending on where Houston finishes, as it remains in a tight division battle with Seattle — to pull off an October upset with big game experience oozing from the Astros and Yankees lineups. New York can also slug, of course, while the return of Yordan Alvarez makes Houston’s offense ever so dangerous again.
The Red Sox, on the other hand, have made the postseason only once (2021) since winning the World Series in 2018. However, they feature a balanced lineup with playoff leadership in the form of Alex Bregman. Plus, Aroldis Chapman is about as good as it gets on the closer front.
AL exec: “I think their bullpen will get hot, and [they] have enough power bats to get through a weaker field in the AL.”
AL player: “It’s the Red Sox. They are playing good baseball. They have formidable pitching starting with [Garrett] Crochet and their lineup is cohesive and looks like they have a good time together. They know how to win with Bregman there.”
AL player: “Everyone is forgetting that Yordan Alvarez missed most of the season. He’s a difference-maker. And when we played them, Framber Valdez and Hunter Brown were as good as any two pitchers. Houston is my pick.”
Everyone’s October sleeper pick: Seattle Mariners
Until recently, the Mariners hadn’t shown the league their best hand, ending up in the sleeper category because of it. Those we spoke to said Seattle simply has more upside available to it than any other team.
AL player: “A team that can get really hot that isn’t playing its best baseball is Seattle. That pitching staff is legit. [Cal] Raleigh hit 50 [home runs] but they have other guys that are built for that moment — the spotlight moment. Randy Arozarena and [Eugenio] Suarez are two of them. They’re built to win late.”
NL player: “It’s one of those lineups where everyone is waiting for them to put it all together. Their rotation is very talented, and they have one of the best closers in the league. I think they’re one of those teams that, if they get hot at the right time, no one can beat them.”
AL exec: “Seattle has one of its best teams we’ve seen there in years. If there is a real sleeper in this entire playoff field, it’s the Seattle Mariners.”
AL exec: “Seattle is my ‘surprise’ team. I think a bad year for pitching in Seattle could get flipped on its head in the postseason with their starters picking it up.”
Environment
5+ year review: The e-bike gear that’s lasted me half a decade or more
Published
44 mins agoon
September 15, 2025By
admin

When it comes to e-bike gear, most of us have been burned before. That “waterproof” pannier that started leaking after the first storm, the multitool that rounded out on its tenth bolt, the lights that faded faster than a dying AA battery. I’ve had my share of disappointments. But over the past decade of nearly daily riding, there’s a small handful of e-bike tools and accessories that have stood the test of time. I’m talking half a decade or more of constant use, surviving rain, dust, sun, and the occasional crash, and still going strong.
As an e-bike reviewer who tests an untold number of new, shiny bikes and gadgets each year, I often share my early experiences with a new product. But rarely do I get to do a long-term review – and I mean years. So here’s a chance for me to look back at the gear I’ve incorporated into my car-free life for over half a decade.
These aren’t just “pretty good” products. These are the pieces of gear that have earned a permanent spot on my bike or in my toolkit. They’ve been with me through countless commutes, late-night rides, weekend tours, international trips, and enough roadside repairs to fill a small notebook. And even after years of abuse, they still do their job without complaint.
So, whether you’re building your first e-bike setup or replacing gear that gave up the ghost too soon, here’s my long-term, battle-tested list of e-bike products that have survived five years of heavy use and are still worth every penny.
Advertisement – scroll for more content
Topeak Ratchet Stick
The Topeak Ratchet Stick might just be my all-time favorite bike tool.
It doesn’t cover every possible repair, but it includes the hex driver sizes you’ll use for most routine jobs, like adjusting brakes, saddles, racks, and so on. There’s also a second plastic holder with extra bits, mostly Torx drivers, but I rarely need them. In fact, I’m not even sure where that holder is anymore. I haven’t seen it in years and I’d guess it’s probably buried somewhere in my parts bin. The five bits stored in the handle of the tool are all I use regularly (2, 3, 4, 5, and 6mm).

Even without the extras, the core tool is a game-changer. All your most-used bits are right there, ready to pop into the compact ratchet, which makes tightening bolts far faster than fiddling with a standard Allen key. No more lifting and resetting every partial turn – the ratchet lets you work continuously, and the quick direction lever flips between tightening and loosening instantly. Especially for bolts with Loctite that require spending a minute or two to slowly drive down a dozen threads a half turn at a time with an Allen key, the ratchet stick takes care of it in 10 seconds.
And for cases where you don’t want the ratchet part, the end of the tool holds the bits like a typical Allen key, so you get the quick turning feature for fast bolt driving, then the ratchet action for quick tightening.
At $45, it’s not cheap, and is in fact quite a bit more expensive than the free set of Allen wrenches that came with your bike. But if you work on bikes as much as I do, it’s worth every penny. Saving the skin on your knuckles is worth it, alone.

This tool isn’t as nice and time-saving as the Topeak Ratchet Stick above, but it is significantly cheaper at $12, and it has some advantages. While you still have to take it out, turn it 180 degrees, put it back in, tighten, and repeat, it’s also a lot shorter which make it better for carrying.
My go-to tool for riding, this one slips easily in my jeans pocket-watch pocket and that also keeps it riding higher so it doesn’t drop down near my thigh. As much as I love my Topeak Ratchet Stick, that one is awkward to carry in a pocket because of its length, so I find it spends more time on my tool shelf for stationary work like repairs and bike building than mobile work like trail-side adjustments.
The AWS tool, on the other hand, is the perfect grab-and-go Allen key set. It’s small, it’s well-made, and it just simply works.

I’ve got a few of these, but the longest-lived one has been with me for over five years. It’s the tool I reach for first when I’m heading out on a ride and want to make sure I have a tool in my hand.
AfterShockz Trekz Air bone conduction headphones
I refuse to wear earbuds or “normal” headphones on a bike under basically any scenario. It started in the military when we weren’t allowed to wear earbuds when off-base for situational awareness reasons, and the sensibility stuck with me.
There’s no situation where I’d be on a bike and think, “You know what would make this experience better? Not being able to hear dangers around me.” Whether commuting in the city or enjoying a nature ride, I either need to hear potential threats or I just want to be able to take in the sounds of my environment.
And yet, it can still be nice to listen to a podcast or music on a long fitness ride or run. So I prefer bone conduction headphones. These leave your ears open for ambient noises, and instead conduct the sound right through your skull. Is the audio quality as good as over-the-ear noise-cancelling headphones? Of course not. But I’d rather be alive while listening to moderate quality audio than get those deep bases right up to the moment I’m being pancaked by an Isuzu.


I’ve had these headphones since 2019, and they are still going strong. I don’t only use them for riding – in fact I use them even more often for running. I can get around five or six 45-minute running sessions in before they need a charge, so the battery is obviously worn down from when they were new, but the darn things just continue to work. Other than needing to charge more frequently, they’re as good as new.
I’m not sure they even make this exact model anymore, but Aftershockz seems to have many different models now, and this one looks close.
Cotopaxi Allpa 35 backpack
If I could have only one backpack in my life (I shudder at the thought), it would be this one. Cotopaxi is a great brand for a lot of reasons, chief among them the build quality and their commitment to sustainability, but the Allpa 35L is the creme de la creme for me.
This is more of a travel bag, and I’ve used it a ton that way. I’ve had this thing on countless trips to countless countries (I lost track at around 11 or 12) and I’ve beaten the hell out of it. I’ve taken it on jarring bikes rides, I’ve lashed it to the pillion seat on 100 MPH electric motorcycles, I’ve dragged it across airport floors, I’ve tossed it by the zipper pulls on the rare occasion that I’m in a rush and that’s the closest thing I can grab… Basically, it’s lived a hard life with me full of use and abuse. And yet, here we are, six years later.
The only wear it’s really showing is the rubberized coating on the front (and I’d even recommend getting the version without the rubberized front for that reason), but it’s merely aesthetic wear that doesn’t impact its functionality. The bag still works as well as the day I got it, which was nearly 2,000 days ago. Over $200 isn’t cheap for a bag, but when it lasts as long as this one, it’s a lot cheaper than buying a $45 bag every year.
This big boy probably isn’t the bag you want for a quick bike ride, but for longer trips like bikepacking and travel, it’s the only bag I take. Plus it also comes in smaller sizes if you don’t carry as much gear as I sometimes do.
See it in action on a motorcycle trip I took a few years ago, below.
Elite Borson bicycle travel bag
This Elite Borson bike bag has carried bikes internationally for me since 2020. It’s gotten tossed around. It’s gotten beat up. A few years ago it arrived at one international airport with one of its four wheels mysteriously missing. And yet, here we are. It keeps on trucking, and so I keep abusing it.
I’ve never once had a bike that I shipped in it arrive damaged. It’s hard where it needs to be, soft where it should be, and just gets the job done.
I love that despite all of its protection, it also packs down to around 1/4 of its size when not in use (which is good since this bag is HUGE). The only big downside to it is having to always go to the oversize bag drop/baggage claim belt at airports, but such is the life of a destination bike rider.
I’ve seen lots of cheaper bicycle bags out there, but if you’re going to travel with a heavy e-bike and you don’t want it getting damaged, this beast of a bike bag will get it there.

Oh yea, and about that wheel. It’s a bummer that I lost a caster wheel somewhere along the way. But the bag is so strong and the bottom of the bag is so tough that I have used it for years now with just three wheels. That corner of the bag simply drags along the ground.
I guess eventually it will wear down there, but who knows how long that will take. Maybe we will have hoverbikes by then.
Mirrycle bar-end mirror
There are a lot of bicycle mirrors out there, but the Mirrycle bar end mirror has long been a favorite of mine. I’ve got several, but the oldest is from around 2013. That’s a darn long time!
These are no-nonsense mirrors that don’t shake, don’t vibrate, and lock in strongly to just about any bike handlebar.
I can’t stop wobbly mirrors or models that you have to readjust after every big bump. The Mirrycle bar end mirror always stays where I put it unless I smack it into something, and I can’t really blame it in that case.
There’s not much else to say about it. It just works. It shows you what’s behind you. And it’s been doing so for me over the last 12 years. I’d say that’s a solid value for $15.

The takeaway
In a world where most products seem designed to fail just after the warranty expires, finding gear that lasts this long feels like discovering a secret. These tools and accessories are beyond reliable; they’ve become trusted companions on many of my daily rides.
Of course, nothing lasts forever. But if these items can survive my daily abuse for over half a decade, they’ve got a fighting chance of lasting through whatever you throw at them. And in my book, that makes them worth not just buying, but keeping for the long haul.
Here’s to fewer broken parts, fewer replacements, and more gear that’s built to ride as far and as long as we do.
FTC: We use income earning auto affiliate links. More.
Trending
-
Sports3 years ago
‘Storybook stuff’: Inside the night Bryce Harper sent the Phillies to the World Series
-
Sports1 year ago
Story injured on diving stop, exits Red Sox game
-
Sports2 years ago
Game 1 of WS least-watched in recorded history
-
Sports2 years ago
MLB Rank 2023: Ranking baseball’s top 100 players
-
Sports2 years ago
Button battles heat exhaustion in NASCAR debut
-
Sports4 years ago
Team Europe easily wins 4th straight Laver Cup
-
Environment2 years ago
Japan and South Korea have a lot at stake in a free and open South China Sea
-
Environment11 months ago
Here are the best electric bikes you can buy at every price level in October 2024