Connect with us

Published

on

Tesla will use Samsung for as a supplier for its self-driving computer’s next-gen hardware in a $16.5 billion deal, according to Tesla CEO Elon Musk.

But despite planning two generations ahead, the company still doesn’t have a solution to bring the promised full autonomy to hardware that it’s been promising that capability to since 2016.

Earlier today, Samsung announced a 22.8 trillion won ($16.5 billion) deal that would run through 2033. In that filing, Samsung did not name the customer, only that it is a “large global company”. Later, Bloomberg reported that the customer is Tesla, and Musk confirmed this on twitter. Then in his usual bravado, he stated that the deal is “likely much more than that.”

Musk also stated that the chips will be made in Samsung’s facility in Taylor, Texas. Manufacturing is likely to start in 2026.

Advertisement – scroll for more content

Samsung makes the chips for the self-driving computers in Tesla’s current vehicles, but the next generation will be made by TSMC, first in Taiwan and then later in Arizona. Then the next-next generation will be covered by this new Samsung deal.

The new deal is significant due to TSMC’s global dominance of chipmaking. Samsung has had significant unused capacity, so the Tesla deal is a big boost for the company’s chip foundry business.

Tesla has gone through several generations of chips, previous referred to as “HW,” standing for “hardware,” with a number indicating their generation. More recently, Tesla started referring to its chips with “AI” instead of “HW,” in order to incorporate the tech buzzword du jour.

Currently Tesla is on HW4/AI4, and TSMC will make HW5, then Samsung will make HW6 again.

These generations of hardware each get successively more capable, and can handle more data and thus theoretically become better at self-driving tasks.

Current Tesla HW4 vehicles cannot drive themselves, and are only capable of SAE level 2 operation, which requires an attentive driver behind the steering wheel (though Tesla’s solution does work better than most others). Tesla’s ‘Robotaxi’ system is currently operating in Austin without anyone in the driver’s seat, but has a “safety rider” who can take control of the vehicle, blurring the line somewhat on which SAE level it is operating at.

But what about HW3?

There’s a problem with the differentiation between these generations of hardware: ever since 2016, when Tesla was on version 2 of its hardware, it has promised full self-driving capability on all of its vehicles.

This was announced in a blog post on October 19, 2016, which has since been deleted from Tesla’s website but is still available through archive.org.

Tesla stated, at the time, that every single Tesla vehicle produced after that date had the hardware that would allow for full self-driving.

It eventually became apparent that HW2 would not be capable of full self-driving tasks, and Tesla upgraded to HW3, promising all HW2 customers that they would get a free upgrade to HW3 if they bought Tesla’s Full Self-Driving system, which has varied in price over time but once cost $15,000.

However, Tesla still tried to charge owners $1,500 for that hardware upgrade, even though Tesla sold cars claiming that they had all the hardware needed for full self-driving.

One owner had to take Tesla to court to get them to deliver on this promise, and Tesla is still charging $1,000 for this hardware owners already bought. And that’s not the only one, there are a number of other self-driving false advertising cases that have gone to court, arbitration, or reached a settlement.

Now, with the change from HW3 to HW4, we’re seeing indications of a similar run-around.

We’ve already seen differing FSD software versions based on which hardware level vehicles have, with HW3 vehicles getting updates later than HW4 vehicles do. On last week’s Q2 earnings call, Tesla CFO Vaibhav Taneja said:

What we want to do is get unsupervised done on hardware four first. Once it’s done, then we’ll go back and look at what we need to do with the hardware three cars. Like I said, the focus is first to get unsupervised out and then we’ll go back and see what more work we need to do.

“Unsupervised” is Tesla’s new name for actual full self-driving, which would allow a vehicle to drive without the supervision of someone in the driver’s seat. This as opposed to “supervised FSD,” a phrase Tesla started using after about a decade of promising full self-driving without delivering it.

Here, Taneja said that HW3 cars will eventually get FSD, but Tesla hasn’t really figured out the path to that, and it’s focusing on new cars first, then will go back around to see what needs to happen.

Previously, Musk had stated that Tesla “will have to upgrade people’s hardware 3 computer,” but more recently it has become apparent that Tesla really doesn’t have a plan for that upgrade. And Taneja’s comments suggest that Tesla will still try to wedge FSD onto HW3, despite previously admitting that the system is not capable of it.

The existence of future HW5 and even HW6 chips also suggest that current systems are not capable of full self-driving. If HW4 is FSD-capable, then why would Tesla need two more generations of chip in the next two years in order to do the tasks that it promised all of its cars could do a full decade prior?

So, much more than having no solution for HW3 cars (or even HW2 cars, some of which have gotten free upgrades, but others who have been charged $1,000 to upgrade to a computer they already paid for), does this mean that Tesla is going to kick the can further down the road, and eventually have no solution for HW4 and HW5 either?

And, when will we know about these solutions? Tesla has sold millions of vehicles with the promise of self-driving which will seemingly need an upgrade at some point. And many of those vehicles are old enough, at this point, to be retired, despite spending up to $15,000 on a piece of software that has never been delivered to them.

An HW6/AI6 computer will surely have all sorts of new whizbang capabilities, but we were promised those capabilities years ago, and they’re still not delivered yet.


The 30% federal solar tax credit is ending this year. If you’ve ever considered going solar, now’s the time to act. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them.

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Oil giant Equinor backs crisis-stricken Orsted as Trump lashes out at offshore wind

Published

on

By

Oil giant Equinor backs crisis-stricken Orsted as Trump lashes out at offshore wind

Picture taken on September 4, 2023 shows windmills at the Nysted Offshore Wind Farm constructed by Danish windpower giant Orsted in 2002-2003 in the Baltic Sea near Gedser in Denmark.

Thomas Traasdahl | Afp | Getty Images

Norwegian oil giant Equinor on Monday pledged to support Denmark’s Orsted with almost $1 billion of fresh capital, backing the beleaguered company amid sustained attacks on offshore wind projects from the Trump administration.

In an apparent show of confidence in the world’s largest offshore wind developer, Equinor signaled its intention to participate in Orsted’s planned 60 billion Danish krone ($9.4 billion) rights issue and said it intended to hold on to its 10% ownership in the company.

Equinor said its strategic support of the rights issue reflects its confidence in Orsted’s underlying business and the competitiveness of offshore wind in the future energy mix. The state-backed Norwegian energy group is the second largest shareholder in Orsted, behind the Danish government.

As part of the move, Equinor said it would nominate a candidate to Orsted’s board of directors.

Shares of Orsted rose 3.6% on the news, before paring gains. The stock price, which is down nearly 90% from a 2021, peak notched a fresh record low last month after the Trump administration ordered the company to halt work on a near complete windfarm.

Equinor shares were last seen 0.2% higher on Monday morning.

Both companies have been navigating challenges around the offshore wind industry, with Equinor saying it is closely monitoring developments in the U.S., and that it intends to remain in dialogue with Orsted.

The wind industry has been a target for U.S. President Donald Trump since his first day in office. The latest blow came on Friday when the U.S. Department of Transportation canceled $679 million in federal funding for a dozen infrastructure projects that would support offshore wind power nationwide.

“Wasteful, wind projects are using resources that could otherwise go towards revitalizing America’s maritime industry,” Transportation Secretary Sean Duffy said in a statement.

Analysts at RBC Capital Markets said Equinor’s move to support Orsted could be seen as a first step for the company considering the possibility of a potential merger between the two offshore wind portfolios.

“The challenge with participating fully is that the company will effectively increase its net exposure to two 100%-owned US offshore wind projects, neither of which look likely to be farmed down in the near term, and where political support remains uncertain,” analysts at RBC Capital Markets said in a research note.

“The incremental positive is that alongside its maintained shareholding, Equinor will now be having board representation, making the most of a challenging situation,” they added.

Spokespeople for Equinor and Orsted did not immediately respond to a CNBC request for comment.

— CNBC’s Spencer Kimball & Ganesh Rao contributed to this report.

Continue Reading

Environment

E-quipment highlight: Komatsu PC20E-6 electric mini excavator

Published

on

By

E-quipment highlight: Komatsu PC20E-6 electric mini excavator

Japanese equipment giant Komatsu has added a not-so-giant electric excavator to its growing lineup of battery-powered construction equipment. The new Komatsu PC20E-6 electric mini excavator promises a full day of work from a single charge.

Komatsu says the design of its latest mini excavator was informed by data sourced from more than 40,000 working days of comparably-sized diesel excavators. The company found that, in 90% of its global customers’ mini excavator deployments, these vehicles are in active use for less than 3.5 hours per day.

“This defined the target for the required, reliable working time with the excavator,” reads the Komatsu web copy. “This result makes it possible for Komatsu to offer an attractively priced machine with a performance that exactly matches the requirements.”

Keeping costs down are relatively conservative specs. Komatsu chose to power the PC20E-6 with a 23.2 kWh battery pack sending electrons to an 11 kW (~15 hp), high-torque electric motors. Not exactly super impressive on paper, but the machine has an operating weight of 2,190 kg and enough juice for up to four (4) hours of continuous operation.

Advertisement – scroll for more content

More than enough, in other words, to have completed 90% of of those 40,000 work days the company analyzed.

Getting it done


PC20E-6 electric mini excavator; via Komatsu.

If, for some reason, that four hours’ runtime isn’t enough, an on-board charging option for 230V and 3kW charging power compatible with various plug adapters is standard, with an external DC quick charger for 400V and 12 kW charging as optional. In either case, it won’t be long before the machine is back at work.

To help the later adopters sleep well about their battery-powered investments, the PC20E-6 ships with Komatsu’s E-Support maintenance program, which includes free scheduled maintenance by a Komatsu-trained technician, a 3 year/2,000 hour warranty on the machine, plus a 5 year/10,000 hour warranty on the electric driveline. The company says the battery should last 10 years.

“The Komatsu E-Support customer program is included free of charge with every market-ready electric mini excavator and offers exclusive machine support,” said Emanuele Viel, Group Manager Utility at Komatsu Europe. “The bottom line is that the risk for the end customer is significantly reduced, especially when it comes to exploring the electrification advances in the industry.”

Komatsu hasn’t released official pricing quite yet, but has revealed that the P20E-6 will begin series production this October.

SOURCE | IMAGES: Komatsu.


If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them. 

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Tesla unexpectedly ends contract at Giga Texas, letting go 82 people

Published

on

By

Tesla unexpectedly ends contract at Giga Texas, letting go 82 people

Tesla has unexpectedly terminated a contractor’s contract at Gigafactory Texas, resulting in the layoff of 82 workers who were supporting the automaker’s production at the giant factory in Austin.

MPW Industrial Services Inc., an Ohio-based industrial service provider specializing in cleaning and facility management, has issued a new WARN notice, confirming that it will lay off 82 workers in Texas due to Tesla unexpectedly ending its contract with the company.

Here are the details from the WARN notice:

  • State / agency: Texas Workforce Commission (TWC).
  • Notice date: August 27, 2025.
  • Employees affected: 82
  • Likely effective date: September 1, 2025
  • Context from the filing/letter: layoffs tied to an unexpected termination of a major customer contract (Tesla—Gigafactory Texas, 1 Tesla Road); positions include 61 technicians, 7 team leads, 7 supervisors, 7 managers; no bumping rights; workers not union-represented.

In April 2024, Tesla initiated waves of layoffs at the plant, resulting in the dismissal of more than 2,000 employees in Austin, Texas.

Advertisement – scroll for more content

Since then, Tesla’s sales have been in a steady decline. While the automaker is expected to have a strong quarter in the US in Q3 due to the end of the tax credit, sales are expected to decline further in Q4 and the first half of 2026.

Many industry watchers have expected Tesla to initiate further layoffs due to the situation.

Electrek’s Take

We may be seeing the beginnings of a new wave of layoffs at Tesla, as the automaker typically starts with contractors.

To be fair, Tesla could also potentially end the contract unexpectedly for other reasons, but the timing does align with the need to cut costs and staff ahead of an inevitable downturn in US EV sales.

I think it’s inevitable that we start seeing some layoffs. I think Tesla will have to slow down production in the US to avoid creating an oversupply, especially in Q4-Q1.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending