Connect with us

Published

on

A canton in Switzerland commissioned a project in which solar panels were attached vertically to a roadside retaining wall.

The canton of Appenzell Ausserhoden in northeastern Switzerland is aiming to generate at least 40% of its electricity from renewables by 2035. So, it exercised a little creativity and covered a roadside retaining wall with 756 glass-glass solar panels.

The panels have an output of 325 kW and an energy yield of around 230,000 kWh annually. This is equivalent to the consumption of about 52 Swiss households. The energy will be fed into the grid of energy supplier St. Gallisch-Appenzellische Kraftwerke, and the canton will get a feed-in tariff in return.

German mounting system provider K2 Systems and Swiss contractor Solarmotion installed the vertical system on the 75-degree retaining wall. The panels were anchored on a mounting rail with HUS screw anchors, and Lichtenstein-based Hilti provided mechanical dowels. 

The PV system was anchored on and in the masonry using an adhesive technique. An anchoring depth of a maximum of 90 mm could not be exceeded so that the retaining wall would not be adversely affected.

Due to the close proximity to the asphalt, the solar panels’ components are subject to exceptional corrosion requirements and are anodized for protection. Indirect components are made of aluminum – only the screw anchors are made of stainless steel.

K2 Systems says that “especially in the winter months (when consumption and dependence on foreign electricity imports are at their highest), the vertically aligned modules will achieve a very good electricity yield.”

Electrek’s Take

This isn’t a big project, but it’s a delightfully creative one, which is why it caught my eye. A retaining wall is dead space, and snow will slide off the panels in Swiss winters.

We at Electrek love it when solar is installed in intelligent and inventive ways. Warehouse rooftops? Cover them. Highway medians? Canal covers? Box stores? Put solar on them. It just makes sense.

Read more: In a US first, California will pilot solar-panel canopies over canals

Photo: K2 Systems


To limit power outages and make your home more resilient, consider going solar with a battery storage system. In order to find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and you share your phone number with them.

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. – ad*

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

This is the first ever semi-solid-state battery going into a production e-bike

Published

on

By

This is the first ever semi-solid-state battery going into a production e-bike

Solid-state batteries have long been the holy grail of electric vehicles, especially for light EVs like electric bicycles that are usually charged indoors. They hold major safety benefits over traditional lithium-ion batteries, plus offer better energy density, making it possible to use smaller batteries or simply fit more capacity in the same-sized battery pack.

Solid-state batteries have spent decades being touted as five years away, but if you thought you’d have to keep waiting, then I’ve got news for you: yes, you still have to keep waiting.

However, in the meantime, semi-solid-state batteries are here and will be launched on their first production e-bike next month.

I had the chance to check out the batteries in person at EICMA 2025 when I visited with the company that makes them, T&D. The company was spun out of e-bike component maker Bafang (and founded by the same co-founder of Bafang, Sunny He) in order to move more in the direction of electric motorcycle component development.

Advertisement – scroll for more content

In addition to their drivetrain components, a significant portion of their R&D has also focused on semi-solid-state batteries, which contain a minimal amount of electrolyte compared to traditional lithium-ion batteries found in today’s e-bikes. With a fraction of the electrolyte material, these semi-solid-state batteries developed by T&D are more energy-dense and safer than traditional batteries. The cells can be stabbed through by a nail and won’t ignite – don’t try that with the battery on your current e-bike!

Whereas most e-bike batteries today have an energy density of around 150-250 Wh/kg, these new semi-solid-state batteries push the needle even further into the 250-350 Wh/kg ballpark, depending on the specific packaging.

The cells are also rated for long cycle lifespan, with an expected 1,500 charge cycles before reaching 70% of the original capacity. And with fast-charging support, those same cells can be recharged significantly more quickly.

T&D’s semi-solid-state batteries will roll out on their first production e-bike next month, though the company isn’t at liberty to announce which e-bike maker will land the title of first production electric bike with semi-solid-state batteries. Hopefully we’ll hear that announcement soon.

T&D is also known for its e-moto drivetrains. The company’s new Equator City commuter e-moped project, launched in collaboration with Dimentro, utilizes T&D’s swingarm-mounted motor system.

The drivetrain offers 11 kW of peak power, a 5 kWh high-capacity LFP battery, and supports a range of over 100 km (62 miles).

Other projects featuring T&D’s drivetrains at the booth included interesting examples such as a part go-kart, part tractor project that resembles a heavy-towing ATV.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Ford ‘can’t walk away from EVs’ or it risks falling even further behind China

Published

on

By

Ford 'can't walk away from EVs' or it risks falling even further behind China

Ford’s CEO Jim Farley admitted he was humbled after tearing down the first Tesla and Chinese EVs. If it wants to compete globally, Ford can’t walk away from EVs altogether, so it’s planning to shake things up.

Ford can’t walk away from EVs, or it will lose to China

After taking apart a Tesla Model 3 and several electric vehicles from China for the first time, Farley said he was “very humbled” during a new episode of the Office Hours: Business Edition podcast.

The “shocking” revelation is what pushed Ford to overhaul its EV program. Ford is shifting its focus to smaller, more affordable EVs, which require smaller batteries and fewer materials.

Ford is promising its next-generation electric vehicles will be significantly more efficient and advanced than the current Mustang Mach-E and F-150 Lightning. Farley told host Monica Langley that the Mach-E had about 1.6 km of electrical wiring, which led to a larger battery.

Advertisement – scroll for more content

Ford’s CEO has warned several times now that Chinese EV makers pose an “existential threat” to Western brands, including itself.

Ford-walk-away-EVs
Xiaomi SU7 (Source: Xiaomi)

After flying a Xiaomi SU7 from Shanghai to Chicago last year and driving it around for a few months, Farley even said he didn’t want to give it up.

“EVs are exploding in China,” Ford’s CEO said on the podcast, adding the Chinese government had its “foot on the economic scale” to promote electric vehicles.

Ford-walk-away-EVs
Xiaomi SU7 production (Source: Xiaomi)

Although the US is facing headwinds with the $7,500 federal tax credit now expired and the Trump administration shifting policies, Farley admitted, “We can’t walk away from EVs, not just for the US, but if we want to be a global company, I’m not going to just cede that to the Chinese.”

Ford, like most automakers, is bracing for slower EV sales over the next few months. Farley said on the company’s third-quarter earnings call that he expects electric vehicles to account for just 5% of the US market in the near term.

Ford-F-150-Lightning-production
The 2026 Ford F-150 Lightning STX (Source: Ford)

The “EV market in the US is totally different than we thought,” Farley explained during the podcast, adding buyers are looking for more affordable options rather than the “$70-80,000” EV.

To stay competitive, Ford is betting on its new low-cost EV platform, the Ford Universal EV Platform, which the company says will help unlock more affordable electric cars.

Ford-walk-away-EVs
CEO Jim Farley presents the Ford Universal EV Platform in Kentucky (Source: Ford)

The first vehicle Ford plans to launch on the platform is a midsize electric pickup, starting at around $30,000. It’s expected to arrive in 2027. Ford will use lower-cost LFP batteries licensed from China’s CATL. They will be manufactured at Ford’s new plant in Michigan.

According to Lisa Drake, Ford’s vice president of tech platform programs and EV systems, the company intends to match the cost structure of leading Chinese brands.

In the meantime, Ford has paused production of its current electric pickup, the F-150 Lightning. A new report from The Wall Street Journal claims it’s now considering scrapping the EV pickup altogether.

Source: Business Insider

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Mercedes gives first look at the GLB EV interior and it’s loaded with massive screens [Images]

Published

on

By

Mercedes gives first look at the GLB EV interior and it's loaded with massive screens [Images]

The Mercedes GLB EV will be here in less than a month. With its debut just around the corner, Mercedes offered a first look at the new GLB EV’s interior, and yes, it’s loaded with massive screens.

First look at the new Mercedes GLB EV interior

Mercedes is putting the new electric GLB through the paces at the Mercedes Technology Center (MTC) in Singlefingen, Germany, ahead of its world premiere on December 8.

The testing is conducted in wind tunnels that range in temperature from -40 to 104 degrees Fahrenheit. Meanwhile, snow cannons shoot various types of snow while high-powered fans generate winds up to 124 mph, simulating fierce blizzard conditions.

Although it’s covered in snow, you can still see that the new EV version maintains a similar boxy design to the current gas-powered GLB.

Advertisement – scroll for more content

If you look a little closer, it appears to have a larger grille design, like the new GLC EV, which Mercedes said “redefines” the face of the brand.

Mercedes also unveiled the new GLB EV’s interior for the first time, which looks pretty similar to the GLC’s. The optional floating MBUX Superscreen is the highlight, extending the entire width of the dash.

Mercedes-GLB-EV-first-look
The new Mercedes GLB EV during cold-weather testing (Source: Mercedes-Benz)

It also features Mercedes’ new multifunction steering wheel, which reintroduces a rocker switch for the cruise control.

Another new feature is the concave door handle design, which features a floating center panel that opens a storage space. The center console has a similar design, offering an optional wireless charging cradle and cup holders.

Mercedes-GLB-EV-interior-first-look
The interior of the new Mercedes GLB EV (Source: Mercedes-Benz)

Mercedes said the new SUV offers “noticeably more headroom for first and second row occupants” compared to its predecessor. It will offer standard seating for five, with the option to add a third row for seven.

According to Mercedes, the new GLB takes “interior climate comfort” to the next level. For example, the climate control heats up twice as fast as its predecessor during a 20-minute drive at 19 degrees Fahrenheit. Mercedes said that since it only requires half the energy of the current GLB, it helps maximize range.

We will learn more about the Mercedes GLB EV on December 8. Check back soon for updates.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending