Cybertruck will be waterproof enough to serve briefly as a boat, so it can cross rivers, lakes and even seas that aren’t too choppy.
The CEO added that the goal is for a Cybertruck to be able to cross the water between SpaceX’s Starbase and South Padre Island in Texas, which is about 360 meters (1,100 feet).
We have been taking the Cybertruck more seriously with water because we learned that Tesla built a ‘wade mode’ for the truck to be able to go into the water. Tesla says the mode increases the ride height to the max and “pressurizes the battery pack.”
Now, someone has tried it in the real world for the first time:
First off, I find it pretty funny that he skipped super fast over the warning that comes when activating the off-road mode.
This is the number one thing that people should communicate when talking about bringing the Cybertruck in the water.
Tesla clearly states that “damage to the vehicle while off-roading is not covered under warranty’.
Since you have to take the truck in “off-road mode” to get to “wade mode”, you don’t have much of an argument that you were “off-road” and acknowledged that you new damages wouldn’t be covered.
There’s another warning when activating “wade mode”:
It says that it can take up to 10 minutes to pressurize the battery pack and it lasts 30 minutes.
Tesla doesn’t recommend going past 2’7″ of water and again says to “proceed at your own risk”.
The first test was nothing for the Cyberturck. It appeared to be only about a foot of water and the ride height alone appears to have taken care of the problem.
The water got pretty high over the last few tests and the driver was going too fast, creating a large pressure wave, but the Cybertruck had no problem going through it.
However, it was not without some damage. Two plastic body pieces came undone, though TechRax says he popped them back in. The bigger issue is that he noted that the bottoms for the tailgate and tonneau cover were not working after his test.
FTC: We use income earning auto affiliate links.More.
A groundbreaking new Virtual Power Plant Power Purchase Agreement (VPA) provides Texans with solar panels and two 20 kWh sonnen batteries at no upfront cost.
A new sonnen storage + solar VPP for Texans
SOLRITE Energy, which finances solar and battery storage, and global battery storage manufacturer sonnen today announced the launch of their new VPA in Texas’s ERCOT market. This program offers solar and battery storage for homeowners at an affordable monthly rate, making backup power accessible for many Texans.
Here’s how it works: SOLRITE installs solar panels and sonnen batteries at eligible customer households with no upfront cost. (I’ve asked the sonnen spokesperson what the eligibility criteria are and will update this post when I hear back.) Homeowners then pay a lower-than-average rate for the solar energy they produce each month, saving them money compared to typical electricity rates in Texas.
Texans participating in the SOLRITE program pay a leading rate of 12¢ per kWh for solar energy, significantly lower than the 19-20¢ per kWh rate commonly seen in the state.
The sonnen batteries provide backup power for each home at no charge and enable Texan homeowners to join a larger virtual power plant (VPP) network. The VPP supports the Texas grid, reducing reliance on polluting power plants during times of high demand. SOLRITE and sonnen generate revenue from the energy stored in these batteries, which helps cover the cost of the equipment, and that’s what allows homeowners to use the battery systems at no cost.
Each day, the sonnen batteries in the VPP help balance the Texas grid by directing power where it’s needed most and when it’s most valuable. This reduces energy costs for everyone, whether they’re in the VPP or not, and strengthens the grid’s efficiency and resilience.
The VPP also differs from traditional solar buyback programs that send extra energy to the grid whenever it’s sunny. Instead, the sonnen battery network strategically controls when and how energy is shared with the ERCOT grid, making solar energy a more reliable power source.
Since September 2024, SOLRITE says it’s already committed over 40 megawatt-hours of residential battery power to the Texas market through this program, working with solar installers statewide.
Blake Richetta, chairman and CEO of sonnen Inc. USA said:
The bold and inventive SOLRITE introduction in the Texas market represents the most successful early-stage launch of the sonnenConnect VPP in the world.
sonnen is proud to dispatch authentic VPPs across the United States and Australia, as well as the largest behind-the-meter residential battery based VPP in the European Union – with nerve centers in Germany, Italy and Belgium, amongst other countries.
And in all of these markets, we have never seen anything like the SOLRITE Texas launch. We are so proud of the SOLRITE invention, and we are passionate to build a SOLRITE-Future for Texas.
Electrek’s Take
I belong to a virtual power plant in Vermont and have two Tesla Powerwalls, and I love being part of this program. I lease my Powerwalls for $55 a month and had to pay a couple thousand dollars to have them installed, so what sonnen and SOLRITE are offering to Texans is a really good deal.
Now is a great time to begin your solar journey so your system is installed in time for those sunny spring days. If you want to make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20 to 30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here. –trusted affiliate partner
FTC: We use income earning auto affiliate links.More.
The Joint Office of Energy and Transportation’s Communities Taking Charge Accelerator has awarded $43.7 million to 25 innovative EV charging projects across the US.
The Communities Taking Charge Accelerator was launched on April 16, 2024, and the funding comes from the Infrastructure Investment and Jobs Act.
The three main goals of the funding are to expand access to electrified mobility options for folks who don’t have access to home charging, accelerate opportunities for fleet electrification, and improve and advance managed charging systems to mitigate impacts and optimize usage of the grid.
On January 15, 25 project awardees were announced that impact 23 states, the District of Columbia, and Puerto Rico. Challenges that the projects will address include:
Solving for no-home charging. Not everyone has a driveway or garage to charge their EVs, e-bikes, or scooters. Projects are testing creative solutions like curbside chargers, multifamily charging setups, and shared community micromobility hubs. They also look at everything from rate design to building multimodal charging hubs, making it easier for people in apartments or urban areas to power up.
In this project, for example, Voltpost will install lamppost EV chargers in San Francisco using existing infrastructure.
Electrifying fleets for people and goods. Think of shared rides, carpool services, and last-mile delivery trucks. Electrifying these types of light- and medium-duty fleets could have a huge impact on reducing emissions. These projects aim to figure out how to charge fleets more efficiently, whether they’re transporting people or goods. It’s all about improving community access to clean transportation options while keeping operations smooth for fleet operators.
The Los Angeles County Metropolitan Transportation Authority’s project allows Metro Bike Share to increase access to electric bikes by implementing electrified stations with in-dock charging.
Managed charging for clean reliable energy. Managed charging is about coordinating when and how EVs charge to avoid grid strain and use renewable energy whenever possible. Projects in this area are working on open-source tools and standards to make managed charging tech accessible and easy to integrate into today’s energy systems.
The University of Alabama is running a project to develop and implement an end-to-end multi-stakeholder EV charging management framework to enhance grid reliability.
Gabe Klein, executive director of the Joint Office, said, “This investment aims to expand transportation and energy infrastructure to meet the current and anticipated demands – from how people charge and use shared vehicle fleets including e-bikes around transit hubs to a new model for more affordable multifamily housing charging – advancing a more holistic energy and transportation ecosystem.”
Electrek’s Take
The Biden administration has been rapidly doling out funds to clean energy and EV projects, and it’s great to see the Communities Taking Charge Accelerator funds reach its recipients at the 11th hour. There are some great projects, which you can check out here.
Now is a great time to begin your solar journey so your system is installed in time for those sunny spring days. If you want to make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20 to 30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here. –trusted affiliate partner
FTC: We use income earning auto affiliate links.More.
Tesla announced on X that it is working on a new way to keep the cameras clean on the Cybertruck.
Hopefully, it will make its way to other Tesla vehicles because it is a common problem with the performance of its advanced driver assist systems (ADAS).
When driving using Tesla’s Autopilot or Full Self-Driving (Supervised) suite of driver-assist features, you will often get an alert that the system might not work properly because “one or more cameras are obstructed” due to dirt or snow coming off the road and into the lenses.
For Cybertruck, that’s an even problem because the rear-view camera is the only way to look behind the vehicle when the tonneau cover is up.
It led to some owners complaining that they need to remember to clean the camera at the back of the truck almost every time they use it, especially in the winter.
Tesla responded to some of those comments through its ‘Tesla AI’ account on X. One owner specifically asked if Tesla is planning a solution for when it achieves “unsupervised self-driving” because it then can’t expect someone to always be able to clean the cameras and Tesla responded:
On a more serious note, a more comprehensive cleaning solution is being worked on.
Tesla didn’t elaborate on the solution or when it would be available.
I doubt that it will be lasers, though it would be cool, but there’s undoubtedly a need for a solution.
In my own experience with FSD in the Quebec winter, I get alerts of obstructed cameras literally every other drive.
Tesla has already implemented heaters, which help some, but other than the front-facing cameras, which benefit from the windshield wipers, there’s a need for more.
What’s interesting here is Tesla basically admits that for unsupervised self-driving, which was part of the question it answered, it needs to add extra hardware to make it work.
FTC: We use income earning auto affiliate links.More.