Electric freight mobility specialist Einride has opened its first Smartcharger station in the US, launching as the largest operational charging site for heavy-duty EVs on the continent. The new station is strategically located in a busy freight corridor, providing electric truck drivers with 65 charging piles powered by Voltera.
Einride is a developer of all-electric trucks, fleet management software, and autonomous vehicles that has expanded well beyond its Swedish roots, especially in the US. Operating out of a second headquarters established in New York, we’ve seen Einride’s all-electric and autonomous heavy-duty vehicles navigate corridors via remote operators based in Texas and, most recently, operations in Selmer, Tennessee, as part of a partnership with GE Appliances.
During a Release Event streamed in November 2022, Einride shared an upgraded version of its Pod autonomous truck alongside plans for a new network of charging stations. At the time, we learned these Einride branded charging stations would be erected in Sweden and Los Angeles to begin.
Einride also intends to implement additional charging stations at strategic on-road locations in North America that are easily accessible to fleets of electric trucks while also providing a relaxing lounge area for drivers to recharge while their vehicles do the same.
Today, Einride shared that construction of its first station in the US is now complete and operational, a process that took a mere 18 months from start to finish. Today’s milestone kicks off a new vision for heavy-duty freight that is expected to expand throughout the country.
Einride opens new EV charging station in California
Einride’s first Smartcharger Station in North America is now open in Lynwood, California, near the Ports of Los Angeles and Long Beach, which combine to receive 29% of all containerized international waterborne trade for the country.
The site was erected with the help of charging infrastructure developer Voltera, who installed 65 charging piles to deliver up to 200 electric truck charging sessions daily. This new Einride charging station was part of a recent $150 million investment by Voltera to expand the footprint of its commercial electric vehicle charging infrastructure, with plans to double its number of managed charging depots this year.
Einride says its new EV charging station will serve its connected fleet customers like Maersk while offering a robust site for future freight customers to recharge conveniently around Los Angeles County. Einride founder and CEO Robert Falck elaborated:
The launch of Einride’s first Smartcharger station in the U.S. marks a momentous stride in establishing digital, electric freight as an important enabler to a more resilient U.S. freight system. This facility will enable a key region to fast track to electric, given its proximity to the Port of LA, one of the world’s busiest container ports and a driver of the US economy
The Smartcharger station has been integrated with the company’s proprietary fleet management software, Einride Saga, offering fleet drivers real-time charging metrics such as charge status, remaining time, power output, and performance. All of which can be monitored from a driver lounge complete with “key amenities.”
According to Einride, additional charging stations are in the works on both coasts of the US, and construction will begin later this year. While the first Smartcharger Station is operational, Einride shared that it will not be officially open to the public until April but plans to hold a grand opening celebration to mark the milestone.
FTC: We use income earning auto affiliate links.More.
Ford is jumping into the battery energy storage business, betting that booming demand from data centers and the electric grid can absorb the EV battery capacity it says it’s not using.
To achieve this, Ford plans to repurpose its existing EV battery manufacturing capacity in Glendale, Kentucky, into a dedicated hub for manufacturing battery energy storage systems.
Ford pivots from EVs to battery storage for data centers
Ford says it will invest about $2 billion over the next two years to scale the new business. The Kentucky site will be converted to build advanced battery energy storage systems larger than 5 megawatt-hours, including LFP prismatic cells, BESS modules, and 20-foot DC container systems — the kind of hardware increasingly used by data centers, utilities, and large-scale industrial companies.
The company plans to bring initial production online within 18 months, leaning on its manufacturing experience and licensed battery technology. By late 2027, Ford expects the business to deploy at least 20 gigawatt-hours of energy storage annually.
Advertisement – scroll for more content
The move follows a joint venture disposition agreement reached last week between Ford, SK On, SK Battery America, and BlueOval SK. Under the agreement, a Ford subsidiary will independently own and operate the Kentucky battery plants, while SK On will fully own and operate the Tennessee battery plant.
Ford is also planning a separate energy storage play in Michigan. At BlueOval Battery Park Michigan in Marshall, the company will produce smaller amp-hour LFP prismatic cells for residential energy storage systems. That plant is on track to begin manufacturing in 2026, and it will also supply batteries for Ford’s upcoming midsize electric truck — the first model built on the company’s new Universal EV Platform.
Electrek’s Take
Overall, the shift reflects Ford’s broader push toward what it calls “higher-return opportunities.” Alongside taking a step backward to add more gas-powered trucks and vans to its US manufacturing footprint, Ford says it will no longer produce some larger EVs, such as the Lightning F-150, where softer demand and higher costs are resulting from the lack of support for EVs by the Trump administration. (Batteries produced at the Glendale plant were for the all-electric Ford F-150 Lightning. The best-selling electric truck in the US in Q3, before the federal tax credit expired, was the Ford F-150 Lightning, with 10,005 EVs sold, a 39.7% year-over-year increase.)
With tax credits eliminated and regulatory uncertainty, Ford is pivoting to adjacent markets, including grid-scale and residential energy storage, to keep its battery plants running and justify billions in sunk investment.
If you’re looking to replace your old HVAC equipment, it’s always a good idea to get quotes from a few installers. To make sure you’re finding a trusted, reliable HVAC installer near you that offers competitive pricing on heat pumps, check out EnergySage. EnergySage is a free service that makes it easy for you to get a heat pump. They have pre-vetted heat pump installers competing for your business, ensuring you get high quality solutions. Plus, it’s free to use!
Your personalized heat pump quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here. – *ad
FTC: We use income earning auto affiliate links.More.
Stellantis may have backed away from planned EVs like the all-electric Ram REV and range-topping Dodge Charger Daytona R/T EV, but the company isn’t standing still. A newly awarded patent outlines an innovative, foam-based thermal runaway suppression system that’s built into an EV’s battery pack.
The indisputable fact of the matter is that electric vehicles catch fire far less often — and far less frequently — than their combustion-powered brethren. Still, a number of highly-publicized early Tesla fires and poorly managed recall on the first-gen Chevy Bolt have linked “electric car” and “fire” in the minds of many Americans, and the ones who have been waiting to test the EV waters until a better safety solution came along are going to absolutely love this latest setup from Chrysler parent company Stellantis.
MoparInsiders is reporting on a new Stellantis patent awarded on a proactive battery safety system that’s designed to stop thermal runaway (read: fire) before it can cascade through an entire EV battery pack.
Rather than relying solely on passive barriers or post-event containment, Stellantis’ freshly patented system uses strategically placed foam channels and deployment mechanisms that can flood the affected cells with high insulation foam when abnormal heat is detected in a cell, isolating the problem area and dramatically slowing (if not outright stopping) the chain reaction that leads to catastrophic battery failure.
Advertisement – scroll for more content
The patent describes an electric car battery that, on the outside, will look familiar to EV enthusiasts, but there are some key differences “layered in” around the familiar bits. These include:
A bladder filled with a fire-retardant chemical; located close to the battery cells, typically between the cells and the top of the pack. It’s made from a flexible polymer, so it can be punctured when needed
Two sets of blades; the first aimed at the bladder, ready to pierce it and release the fire-retardant chemical while the second targets specific points on the coolant inlet line, outlet line, or heat sinks to rupture them and release cooling foam directly where it’s needed
Special coolant line sections; designed with small sealed apertures that closed off with a soft plug material that’s easy for the blades to pierce but strong enough to maintain pressure during normal operation
Actuation devices tied to a controller; that push the blades into the bladder and coolant components when a thermal event is detected
Special coolant lines
Fire suppressant cooling lines; via Stellantis.
The system relies on a suite of existing temperature sensors throughout the battery pack, and seems like a viable enough solution to a problem that, while rare, certainly exists — and which looms large over America’s Early Majority tech adopters.
As for me, I think Stellantis should focus on bringing more compelling products to market and stop looking for ways to blame the customer, market, and government for its inability to sell Jeep products that, apparently, have enough markup to cover nearly $30,000 in discounts to help dealers move their metal. I look forward to hearing about your take in the comments.
If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.
FTC: We use income earning auto affiliate links.More.
It’s official. The all-electric pickup is dead, but Ford is promising the F-150 Lightning EREV will be “every bit as revolutionary” as it shakes up EV plans once again.
Ford reveals next-gen F-150 Lightning EREV
Ford confirmed production of the current F-150 Lightning has ended as part of its updated Ford+ plan, which the company revealed on Monday.
The changes come as part of a broader shift from larger EVs, like the Lightning, to smaller, more affordable models.
While Ford still plans to launch lower-cost EVs based on its Universal EV Platform, the company is expanding its hybrid and extended range electric vehicle (EREV) lineup. By 2030, Ford expects 50% of its global volume to be hybrids, EREVs, and EVs, up from 17% in 2025.
Advertisement – scroll for more content
As part of its new plans, Ford said the next-generation F-150 Lightning will switch to an EREV powertrain. It will be assembled at the Rouge EV Center in Dearborn, Michigan, replacing the current all-electric pickup.
Ford F-150 Lightning production (Source: Ford)
With production of the current-generation Lightning now concluded, Ford is sending workers from the Rouge EV Center to its Dearborn Truck Plant as it doubles down on gas and hybrids.
During its Q3 earnings call last month, Ford said the electric pickup would remain paused following a fire at Novelis’ plant in New York that disrupted aluminum supply.
(Source: Ford)
The F-150 Lightning is a “groundbreaking” vehicle, according to Doug Field, Ford’s chief EV, digital, and design officer, that showed an electric pickup can be a great F-Series.
Field claims the “next-generation Lightning EREV is every bit as revolutionary.” It will still offer 100% electric power delivery, sub-5-second acceleration, an estimated combined range of 700+ miles, and it “tows like a locomotive.”
Ford also plans to replace its electric commercial van for North America with affordable gas- and hybrid-powered versions. It will be assembled at Ford’s Ohio Assembly Plant.
Ford F-150 Lightning production at the Rouge EV Center (Source: Ford)
The move comes as part of Ford’s plans to launch five new affordable vehicles by the end of the decade, four of which will be assembled in the US. Ford also plans to offer gas, hybrid, and EREV options across nearly every vehicle in its lineup by then.
The first vehicle based on Ford’s new Universal EV Platform will be a midsize electric pickup, starting at around $30,000. It’s expected to be about the size of the Ranger or Maverick.
CEO Jim Farley presents the Ford Universal EV Platform in Kentucky (Source: Ford)
The news comes after SK On announced last week that it planned to end its joint venture with Ford to build EV batteries at three US gigafactories.
Ford is now planning to use the wholly owned EV battery plants in Kentucky and Michigan to launch a new battery energy storage business. The company plans to begin shipping BESS systems in 2027, with an annual capacity of 20 GWh.
“The operating reality has changed, and we are redeploying capital into higher-return growth opportunities: Ford Pro, our market-leading trucks and vans, hybrids, and high-margin opportunities like our new battery energy storage business,” CEO Jim Farley said on Monday.
The changes are designed to improve profitability and returns. Ford’s EV business, Model e, is now expected to reach profitability by 2029 with improvements in 2026.
Model e lost another $1.4 billion in Q3, bringing the total to $3.6 billion through September. Around $3 billion was due to its current EVs, while the other $600 million was spent on its next-gen models.
Although sales of the F-150 Lightning dropped 60.8% last month following the expiration of the $7,500 federal EV tax credit, Ford’s electric pickup remained the best-selling pickup in the US through September.
FTC: We use income earning auto affiliate links.More.