I drove the next-generation R1S and R1T electric vehicles from Rivian, and my main takeaway is that the company is getting better at making electric vehicles.
Not that it wasn’t good before, but it clearly needs to keep getting better to get to profitability.
I already shared all the main changes, which are primarily aimed at reducing Rivian’s manufacturing costs, but here I am going to share my first driving impressions.
Electrek’s Seth Weintraub was supposed to go to the drive, and he would have been a better reviewer, considering he owns a first-gen Rivian R1S and has much more experience than I do behind a Rivian wheel to highlight the differences in this new generation.
However, some scheduling conflicts mean you are stuck with me, who has little to no experience with Rivian vehicles. I’ll do my best.
Again, the main goal of this update was clearly cost reduction. Rivian needs to roughly half its production costs in order to turn its gross margin positive and achieve profitability to support its expanding infrastructure, like service centers, charging stations, and more.
As I wrote in my previous post, the concern was that as Rivian cuts costs, it would damage its premium customer experience by making its vehicles “cheaper,” so to speak. I have been reassured on that front.
Most of the changes have to do with improving the manufacturability of Rivian’s vehicles, which will have no direct impact on the driver experience. However, in order to achieve higher manufacturability, Rivian did things like bring more motor engineering and manufacturing in-house.
That has allowed the company to get more out of its many motor and battery combinations – resulting in impressive improvements in specs:
I love all these options. There’s something for everyone… who can afford a $80,000+ vehicle.
You have the same options on the R1S, the SUV version, but it is a bit slower than its pickup counterpart, and has a third-row.
During my day of driving the next-gen R1s, I got to spend a little bit of time in the R1T Quad Max to do a few launches on a drag strip:
The Rivian R1T second-gen accelerates to 60 mph in 2.5 seconds with the quad motor config.
I’m not sure why you’d want to bring your pickup truck to the drag strip, but it’s nice to have that power when you can use it.
I couldn’t get the 2.5-second advertised 0 to 60 mph time, but I came close at 2.7-second, and I saw some other media people get it while on the drag strip.
Rivian also brought us to DirtFish to do a bit of rally, in a 6,000-lbs vehicle, yes, and some off-roading.
I was particularly impressed by the ability to control many different levels of traction controls and regenerative braking in rally and off-road modes.
Now, that’s all fun and games, and the R1s are both very capable off-road, but let’s be honest, most people are going to use these vehicles on road, and for good reasons.
Both the R1S and R1T have a great balance of premium luxury experience and utilitarian capabilities.
First off, the interior is absolutely splendid. I love the aesthetics. It’s like a nice compromise between Tesla’s ultra-minimalist software-based approach and the crowded luxury of some of the legacy luxury automakers.
I am a big fan of the new Plaid package in this particular version and the seats are super comfortable both in front and back.
There are a few software features that I’m jealous not to have in my Tesla, like Chromecast from your phone. That’s pretty cool.
On the road, the R1S was a smooth drive. I never drove the previous generation, but I know it was using the same suspension as the R1T tuned differently and that means some compromises. With the second generation, Rivian decided to go with some hardware changes between the R1S and R1T’s suspensions.
I was driving with Quinn from Snazzy Labs, who owns a R1S, and therefore, he was able to note a significant improvement.
Even with this improvement that I can’t quantify, I have to say that I preferred driving the R1T. You don’t feel the weight of either vehicle, thanks to the extremely responsive electric drivetrain, but I liked the slightly more dynamic driving of the pickup.
As a Tesla driver on the highway, I got so used to ADAS that I quickly missed it for any decent-distance travel.
I was happy to see that Rivian has updated its autonomy system with the next-generation R1 platform. The autonomy hardware suite now includes 11 cameras all around the vehicles with 8 times the number of megapixels. There are also 5 radars and ultrasonics all around:
Rivian has done a big upgrade to its autonomy hardware suite in the next-gen R1 platform.
11 cameras with 8x more megapixels, five radars, ultrasonics all around the vehicle, and a new compute platform to handle all the data coming from these sensors. pic.twitter.com/pzi94Hg9dk
You need a powerful onboard computer to handle all the data coming from all these sensors, and Rivian is partnering with Nvidia on that front. The automaker is now using a much more powerful autonomy computer:
With this suite, Rivian is aiming for level 3 autonomous driving, but the automaker is not sharing a timeline for that goal.
In the meantime, the company plans to release more and better ADAS features through over-the-air software updates.
I got to try the lane change feature on the highway in a R1S and it worked very well:
However, Rivian still has plenty of room to improve when it comes to lane centering, especially at higher speeds and in curves.
With this new next-generation, for the higher-end versions, Rivian is offering a new “Dynamic Glass Roof” that can change color and opacity at the touch of a button:
But the utilitarian aspects of these vehicles is really where Rivian shines. Obviously, you have the 7-seater third row in the R1S with still plenty of storage space thanks to the giant frunk:
Speaking of the frunk, you also have it on the R1T. Frunks are really great for electric pickup trucks since your trunk is replaced by a bed, which you tend not to keep as clean as the rest of the truck.
That means that you run low in clean cargo space, and that’s what a frunk provides. The R1T’s frunk is great for that, but Rivian goes a step further with its gear tunnel:
The gear tunnel is exactly what it sounds like, a tunnel for gear that runs behind the cabin and in front of the rear wheel.
Between that, the frunk, and the bed, I think it makes the R1T the most utilitarian pickup of its size, electric or not.
Electrek’s Take
Rivian is getting better at making electric vehicles without compromising on its owner experience.
Whether it will be enough to get to a positive gross margin, I don’t know. CEO RJ Scaringe warned that Q2 won’t be representative of the changes since the switch to the next-gen happened in the middle of the quarter, but we should have a much better picture of the situation in Q3.
Based on all the changes, I’m sure that it will result in significant improvements in gross margins, but I don’t know if it will be enough to erase completely the $36,000 in losses for every vehicle delivered. We will see.
In the meantime, this next-generation should also help Rivian continue selling its R1 vehicles with enough updates and upgrades to continue making them a unique offering in the premium SUV and pickup segment.
Now with Supercharger access and improving ADAS system, it is increasingly becoming an interesting option.
I’m seriously considering a R1T for my first electric pickup truck. My Cybertruck review is coming soon, and I’ll do a comparison.
FTC: We use income earning auto affiliate links.More.
CASE arrived at bauma 2025 with an innovative new electric wheel loader with a striking, sharp-edged design that ditches the traditional operator cab in favor of remote or autonomous operation for improved accessibility and safety.
CASE says the cabin-less design of the Impact electric wheel loader enhances operational flexibility by enabling operations in extreme environments and adverse weather conditions. It also means that job site, disaster recovery, or even rescue operations can continue 24/7, with operators in different time zones logging in for their shifts.
More important – and more practical – is CASE’s claim that the new Impact concept, “marks a significant advancement in accessibility, as operators with motor impairments and other disabilities can now operate the machine without physical limitations, representing an important step toward inclusivity in the industry.”
Advertisement – scroll for more content
Along with integrated AI, a full suite of sensors, and autonomous operation built in, CASE says the Impact is a glimpse into a smarter, safer, and more sustainable working future.
Electrek’s Take
Driven by an aging workforce and not enough new talent entering the field, virtually every industrial field is struggling with an international equipment operator shortage. The concept of automation addresses some of that, but remote operation open up the field significantly, and I could easily older operators forced out of work due to injury getting back into it or younger operators halfway around the world who would give anything for an opportunity – and paycheck – like this could provide.
Smart move from CASE, and it’s great to hear them call that out specifically.
Electricity grid demands are on the rise in part due to energy-hungry technology like AI, and while experts believe renewable energy alone is not enough, it is essential to a broader supply equation. But with funding freezes, subsidy walk backs and tariffs on key components all on the table, solar, wind, and hydrogen companies are working harder than ever to make their business models work, even if they never intended to rely on federal support for the long term.
“One of the hats I used to wear was planning for the City of New York. For the longest time, there was decreasing [energy] demand,” said Aseem Kapur, chief revenue officer of GM Energy, an arm of General Motors that the company introduced in 2022. “Over the course of the last five or so years, that equation has changed. Utilities are facing unprecedented demand.”
Beyond New York City, U.S. energy demand is poised to grow upwards of 16% in the next five years, a big difference from the 0.5%it grew each year on average from 2001 to 2024, according to the Center for Strategic & International Studies.
For the renewable energy companies looking to break into the mainstream, subsidies have helped them get through their early days of growth. But President Trump has targeted these solutions from the first day of his presidency. In an executive order from Jan. 20, the Trump administration promised to “unleash” an era of fossil fuels exploration and production while also eliminating “unfair subsidies and other ill-conceived government-imposed market distortions that favor EVs over other technologies.” Last week, Trump issued an EO pushing for more coal production.
In a six-year study breaking down energy subsidies from the U.S. Energy Information Administration from 2022 (the most recent edition), 46% of federal energy subsidies were associated with renewable energy, making them the largest slice of the energy pie. At the same time, natural gas and petroleum subsidies became a net cost to the government in 2022, reversing what had been a source of revenue inflows.
“Every company I’ve talked to recognizes that subsidies were required to help them through an R&D cycle, but they all believed they had to get to a cost parity point,” said Ross Meyercord, CEO of Propel Software (and former Salesforce CIO), whose manufacturing software solution serves energy clients like Invinity Energy Systems and Eos Energy Storage. “Every company had that baked into their business model. It may happen faster than they were planning on, and obviously that creates challenges.”
Meyercord believes that clean energy companies can handle either a subsidy decrease or a rise in tariffs, but both at the same time will add substantial stress to the market, which could have negative downstream effects on the grid — and the people who rely on it.
‘Not going to get rid of fossil fuels overnight’
Like any energy source, Kapur says success always comes down to economics. In the current environment, with interest rates, and fears that inflation will reignite, he said, “it’s going to come down to, ‘What are the most cost-effective solutions that can be brought to market?'” That may vary by region, he added, but notes that solar and energy storage have already reached parity in many cases and, in some instances, are below the cost of producing energy from natural gas or coal-powered resources.
This economics equation is true even in Texas, where the state’s Attorney General Ken Paxton has voiced anti-renewables sentiment in favor of the coal market (his lawsuit against major investment firm BlackRock and others in late November claims these firms sought to “weaponize their shares to pressure the coal companies to accommodate ‘green energy’ goals”). Wind accounts for 24% of the state’s energy profile, according to the Texas Comptroller, suggesting a penchant for any energy source that’s viable and cost-effective.
“The reality is, we’re not going to get rid of fossil fuels overnight,” said Whit Irvin Jr., CEO of hydrogen energy company Q Hydrogen. “They are going to have a very significant piece in our energy ecosystem for decades, and as new technologies come out on a larger scale, the use of fossil fuels will be curtailed, but we need to continue research, development and innovation in a way that makes sense.”
Irvin emphasizes the need for innovation from all sides, including creating new technologies that have a massive impact on large scalability and carbon reduction. “We don’t want to turn off that spigot. We just want to make sure that it’s going to the right places,” he said.
Hydrogen energy itself is one such source of innovation. Hydrogen ranges in sustainability depending on the fuel it uses to source its hydrogen. For example, green hydrogen — the only climate-neutral form of hydrogen energy — stems from renewable energy surplus. Grey hydrogen stems from natural gas methane. Q Hydrogen is working to open the world’s first renewable hydrogen power plant that will be economically viable without a subsidy. Irvin Jr. says the company, which produces hydrogen using water, plans to launch its New Hampshire facility this year.
“Hydrogen fuel cells are a really good way to provide backup power or even prime power to a data center that would be considered essentially off grid,” said Irvin, likening hydrogen fuel cell production to a form of battery storage. While hydrogen is not the most economical because of its comparative immaturity, Irvin said heightened energy demand will outcompete cost sensitivity for tech companies requiring more and more data storage.
While hydrogen projects continue to reap federal incentives to propel the industry forward, Irvin said subsidies were never part of his company’s business equation. “If they do exist, we’ll be able to take advantage of them,” he said. “If they don’t exist, that will still be fine for us.”
But that might not be true for every alternative energy company depending on where they’re at in the R&D cycle. Changes in federal incentives have real power to shift the progression of renewable energy in the U.S., especially when combined with tariffs that could stifle companies’ international relationships and supply chains. Meyercord, Kapur and Irvin all foresee private industry partnerships making a huge impact for the future of the grid, but recognize that the strain is increasing as energy tech of all kinds becomes smarter and more grid-dependent.
Based on the excellent Hyundai IONIQ 5 N platform, Vanwall gives its Vandervell H-GT a high-performance aesthetic makeover inspired by the classic Lancia Delta HF Integrale. But what makes this body kit a genuine “high-performance” upgrade isn’t the way it makes the car look: it’s the 500 lb. weight savings!
Developed by Austrian racing team ByKOLLES Racing and invoking the name of a 1950s Formula 1 team, the Vandervell H-GT is essentially a new Hyundai IONIQ 5 N in aggressive, Lancia Delta-inspired carbon-fiber bodywork that the company claims gives the car an, “unprecedented weight optimization in this vehicle category.”
The H-GT’s new “thin wall” carbon fiber body slashes the car’s weight by over 230 kg (507 lbs.), which means ByKOLLES’ new Vandervell can do anything that Hyundai’s “special” IONIQ 5 N hot hatch can do. Only faster.
The car was first announced in 2023 (along with the renderings shown, below), when ByKOLLES was competing in the World Endurance Championship (WEC) with what used to be called an LMP car – but they keep changing the names of these things so it could be a Daytona Prototype, Hypercar, or even a 24 Hour LeMans Wonkavator by now.
The important part, however, is that a few of these cars have now broken cover, with ex-Formula 1 supremo, Bernie Ecclestone, having been seen trying the new-age Lancia on for size.
The Vanwall Vandervell website still shows the same €128,000 ($145,405, as I type this) price tag and specs it did in 2023, which either means they haven’t updated it in a while, were really, really good at pricing the thing in the first place, or both.
That’s presumably on top of the IONIQ N’s already hefty $66,100 price tag.