It’s an exciting week for grid resiliency-lovers in California, as Governor Gavin Newsom followed up his earlier smart grid law and signed another law this week which may require bidirectional charging on EVs in the future – though the law has no hard timeline attached, so it may be a while before we see this happen.
While these applications may seem like a party trick, widespread use of bidirectional charging could lead to huge benefits for efficiency, grid resiliency, and enable much greater penetration of renewable electricity generation.
Most electric grids don’t really have trouble meeting the regular everyday needs of electricity consumers, it’s when big spikes happen that things get difficult. Either on a hot day when everyone is using air conditioning, or a day when electricity generation is curtailed for some reason or another, that’s when things get difficult.
And as climate change makes temperatures hotter, California’s grid is often overtaxed on the hottest summer days, which are becoming more numerous. Even worse, methane-burning fossil gas peaker plants are the highest-polluting form of electricity California consumes, and these are currently used at peak times in order to deal with high demand.
One solution to this problem is adding energy storage to the grid which can be dispatched when needed, and which can fill up when the grid is oversupplying electricity. This helps to balance out supply and demand of electricity and make everything a little more predictable.
This is why there has been a push for grid-based storage like Tesla megapacks, which represent a large source of rapidly-dispatchable energy storage.
But there’s another source of grid-connected batteries out there which was right under our nose the whole time: electric cars.
EVs, which are mostly connected to the internet anyway, could be used as a distributed energy storage device, and even called upon to help provide electricity when the grid needs it. We already see this happening with Virtual Power Plants based on stationary storage, but if cars had V2G, theoretically cars could contribute in a similar way – both saving the grid, and perhaps making their owners some money along the way via arbitrage (buying electricity when its cheap and selling it when its expensive).
The problem is, not many automakers have included V2G capabilities in their cars, and in the cars that do have it, not many manufacturers have made V2G-capable equipment, and the ones who have built it haven’t seen that many customers who are interested in spending the extra money to upgrade their electrical systems with V2G-capable equipment.
So there needs to be something to jumpstart all of that, and California thinks it might just have the thing.
New CA law might require bidirectional charging… eventually.
The idea started in 2023 when state Senator Nancy Skinner introduced a bill which would require EVs to have bidirectional charging by 2027.
As this bill made its way through the legislative process, it got watered down from that ambitious timeline. So the current form of the bill, which is now called SB 59, took away that timeline and instead gave the California Energy Commission (CEC) the go-ahead to issue a requirement whenever they see it fit.
The bill directs the CEC, the California Air Resources Board, and the California Public Utilities Commission to examine the use cases of bidirectional charging and give them the power to require specific weight classes of EVs to be bidirectional-capable if a compelling use case exists.
The state already estimates that integrating EVs into the grid could save $1 billion in costs annually, so there’s definitely a use case there, but the question is the cost and immediacy of building those vehicles into the grid.
The reason this can’t be done immediately is that cars take time to design, and while adding bidirectional charging to an EV isn’t the most difficult process, it also only really becomes useful with a whole ecosystem of services around the vehicle.
A recent chat Electrek had with DCBEL, making bidirectional chargers simpler for consumers
Even Tesla, which for years has touted itself a tech/energy company and sold powerwalls, inverters, solar panels and so on, is still only gradually trickling its bidirectional Powershare feature out onto its vehicles.
And that ecosystem has been a bit of a hard sell so far. It’s all well and good to tell someone they can make $500/year by selling energy to the grid, but then you have to convince them to buy a more expensive charging unit and keep their car plugged in all the time, with someone else managing its energy storage. Some consumers might push back against that, so part of CEC’s job is to wait to pull the trigger until it becomes apparent that people are actually interested in the end-user use case for V2G – otherwise, no sense in requiring a feature that nobody is going to use.
Electrek’s Take
Given all of these influences, we wouldn’t expect CA to require bidirectional charging any time soon. But it still gives the state a powerful trigger to pull if other efforts, like the recently-signed smart grid law, turn out not to be enough as California works to, grow, clean up, and make its grid more affordable all at the same time.
But having the force of law behind it could turn V2G into less of a parlor trick and more into something that actually makes a difference the way us EV nerds have been dreaming of for decades now (true story: Electrek once turned down Margot Robbie for an interview and instead talked to some engineers about V2G for an hour).
So, telling manufacturers that California may start mandating bidirectional charging soon means that those manufacturers will perhaps start taking V2G more seriously, particularly given the size and influence of CA’s car market. Even if the CEC doesn’t make it a requirement, the threat of it eventually becoming one means that EV-makers will probably start getting ready for it regardless.
There’s no real point to a single person discharging their car into the grid, but when millions of cars are involved, you could work to flatten out the famous “duck curve,” which describes the imbalance between electricity supply and demand. We hear a lot about “intermittency” as the problem with wind and solar, and grid storage as the solution to that, so being able to immediately switch on gigawatt-hours worth of installed storage capacity would certainly help to solve that problem. And we hope this law helps us get just a little closer to that potential future.
And if you want to sell power back to the grid today, you can already do that with home solar panels! In order to find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and you share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. – ad*
FTC: We use income earning auto affiliate links.More.
Texas-based tuning firm Vigilante 4×4 is known for its wild, high-horsepower Jeep SJ Hemi restomods – but they’re more than just a hot rod shop. To prove it, they’ve developed a bespoke, all-electric skateboard chassis designed to turn the classic Jeep Grand Wagoneer into a modern, desirable electric SUV.
The scope of the Vigilante 4×4 electric chassis project is truly impressive. More than just a Jeep SJ frame with an electric drive train bolted in, the chassis is a completely fresh design that utilizes precise 3D scans of the original SJ Wagoneers, Grand Wagoneers, and J-Trucks to establish hard points, then fitted with low-slung battery packs to give the electric restomods superior weight balance, a lower center of gravity, and objectively improved ride and handling compared to its classic, ICE-powered forefathers.
The result is a purpose-built platform that delivers power to the wheels through a dual-motor system – one mounted in the front, and one at the rear – to provide a permanent, infinitely variable four-wheel drive system that offers both on-road performance and the kind of off-road capability that made the Grand Wagoneer famous in the first place.
Vigilante 4×4 electric Jeep SJ
“This isn’t a replacement for our Vigilante HEMI offerings,” reads the official copy. “It’s a total revisit of the Vigilante platform under electric power.”
Advertisement – scroll for more content
The company emphasizes that its new chassis is still in the prototype stages. As such, there are no specs, there is no pricing, there are no range estimates. Despite it all, the response from Jeep enthusiasts has already been strong. “Keep in mind this is our first prototype,” a spokesperson said. “There’s still a lot of work to be done – but the journey has begun.”
Electrek’s Take
Electric SJ chassis; Vigilante 4×4.
Retro done wrong – think the Dodge Charger Daytona EV or VW ID.Buzz – is a disaster. Always. If that nostalgic tone is just a little bit off, the song doesn’t work. The heartstrings don’t pull. Done right, however, the siren song of nostalgia will have you putting a second mortgage on your house to put a Singer Porsche or ICON Bronco in your garage.
If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.
FTC: We use income earning auto affiliate links.More.
EQORE, a distributed battery storage startup based in Somerville, Massachusetts, has raised $1.7 million in seed funding to help industrial buildings tackle rising electricity costs. The round was oversubscribed and includes backing from the Massachusetts Clean Energy Center (MassCEC), Henry Ford III of Ford Motor Company, and Jonathan Kraft of The Kraft Group.
The timing couldn’t be more relevant. Data centers are booming, and that demand is slamming an already stressed grid. Big, utility-scale batteries help at the grid level, but they can’t fix the bottlenecks happening on local distribution networks. That’s where onsite storage steps in — storing energy when demand is low and discharging it when demand spikes, which helps stabilize costs for both the grid and the businesses using it.
MassCEC’s head of investments, Susan Stewart, said, “What excites us the most about EQORE’s technology is the dual impact: grid support and customer savings.” She noted that commercial and industrial buildings are ideal hosts for battery storage, but haven’t gotten much attention until now. “EQORE is closing that gap.”
Investor Randolph Mann highlighted what makes the company stand out: “By uniting advanced controls with high‑resolution metering and true end‑to‑end service, EQORE finally makes commercial behind-the-meter storage effortless and financially compelling for businesses.”
Advertisement – scroll for more content
EQORE comes out of MIT’s Sandbox program and delta v accelerator and is currently part of the Harvard Climate Entrepreneurs Circle incubator. CEO and cofounder Valeriia Tyshchenko, a third‑generation engineer from Ukraine and MIT graduate, said the new funding will help the company scale alongside its existing revenue.
With the seed round closed, EQORE plans to grow its team and ramp up battery deployments at energy-intensive manufacturing facilities. The company doesn’t just install batteries; it operates them. Its autonomous software shifts when a facility uses power based on market conditions and utility incentives, reshaping load in real-time without disrupting operations.
If you’re looking to replace your old HVAC equipment, it’s always a good idea to get quotes from a few installers. To make sure you’re finding a trusted, reliable HVAC installer near you that offers competitive pricing on heat pumps, check out EnergySage. EnergySage is a free service that makes it easy for you to get a heat pump. They have pre-vetted heat pump installers competing for your business, ensuring you get high quality solutions. Plus, it’s free to use!
Your personalized heat pump quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here. – *ad
FTC: We use income earning auto affiliate links.More.
Hyundai took the sheets of its new off-road electric SUV, the Crater Concept, at the LA Auto Show. Here’s our first look at the compact off-roader.
Meet Hyundai’s new off-road SUV, the Crater Concept
We knew it was coming after Hyundai teased the off-road SUV earlier this week, hidden under a drape. Hyundai took the sheets off the Crater Concept at the LA Auto Show on Thursday, giving us our first real look at the rugged off-roader.
Hyundai refers to it as a compact off-road SUV that’s inspired by extreme events. The concept was brought to life at the Hyundai America Technical Center in Irvine, California.
The off-road SUV draws design elements from Hyundai’s Extra Rugged Terrain (XRT) models, such as the IONIQ 5 XRT, Santa Cruz XRT, and the new Pallisade XRT Pro.
Advertisement – scroll for more content
Although it’s a concept, Hyundai said the Crater Concept is a testament to its commitment to designing future XRT vehicles that are more functional, more capable, and more emotional.
The Hyundai Crater off-road SUV Concept (Source: Hyundai)
“CRATER began with a question: ‘What does freedom look like?’ This vehicle stands as our answer,” Hyundai’s global design boss, SangYup Lee said.
The off-road SUV features Hyundai’s new Art of Steel design theme, first showcased on the THREE concept at the Munich Motor Show in September.
The Hyundai Crater Concept (Source: Hyundai)
Hyundai said the design team was guided by one clear goal: To create a rugged and capable vehicle that’s designed to go anywhere. The Crater Concept embodies that vision with added wide skid plates, 33″ off-road tires, limb risers, rocker panels, and a roof platform.
Hyundai designed the interior for “tech-savvy adventure seekers,” with a singular design centered around a high-brow crash pad that stretches across the dashboard.
The Hyundai Crater Concept (Source: Hyundai)
The concept also swaps the traditional infotainment setup for a head-up display that spans the entire front window, which Hyundai said includes a live rearview camera.
Hyundai’s off-roader includes a new Off-Road Controller for front and rear locking differentials, as well as a terrain selector with modes including Sand, Snow, and Mud. Other off-road features include downhill brake control, trailer brake control, a compass, and an altimeter.
Although Hyundai said it was electric, it didn’t reveal any further details about the powertrain. The off-road SUV could be a battery-electric or fuel-cell-electric vehicle.
Like the new Nexo, Hyundai’s hydrogen fuel cell vehicle, the concept features “HTWO” lamps exclusive to its FCEVs.
Earlier this week, the design team at Hyundai Design North America also introduced its new design and ideation studio codenamed “The Sandbox.” The creative design studio is set to serve as a global hub for future XRT vehicles and gear.
FTC: We use income earning auto affiliate links.More.