Connect with us

Published

on

Rivian is plowing ahead with its new midsize R2 electric SUV. As it gears up for production, Rivian’s CEO, RJ Scaringe, gave us a sneak peek at the R2 body being built with production dies.

First look at the Rivian R2 body with production dies

Starting at $45,000, the R2 will be about half the cost of Rivian’s current R1S ($77,700) and R1T ($71,700). Despite a smaller size, the company promises it will still have that “Rivian essence” that has helped get the EV maker to where it is today.

Rivian’s CFO, Claire McDonough, said the team was “working around the clock” earlier this month to prepare its Normal, IL facility for R2 production.

McDonough confirmed that the sourcing for R2 was about 95% complete, and the start of production was still scheduled for the first half of 2026.

Advertisement – scroll for more content

In the meantime, Scaringe is giving us a closer look at the R2 as it goes through development. Earlier this month, he posted a picture of the R2’s highly efficient Maximum drive unit.

The new unit uses continuous winding in the stator to reduce the total welds per stator assembly from 264 to just 24. With an integrated rotor shaft and gear, Maximum uses just two bearings, down from four on its Enduro drive unit.

As Rivian moves closer to production, we’re getting an up-close look at the R2 body being built. Rivian’s CEO shared a picture on X showing the R2 body, now built with production dies.

Although Rivian will begin building R2 models in Normal, it will significantly ramp up production at its new plant in Georgia. McDonough said the GA facility is still on track to come online in 2028.

Rivian-R2-body-EV
Rivian R2 midsize electric SUV (Source: Rivian)

Once fully up and running, it’s expected to have up to 400,000 annual vehicle production capacity. To put that into perspective, Rivian built just shy of 50,000 EVs last year.

After scaling production, Rivian will launch the R2 in Europe as it takes the brand overseas. The company promises that R2 is just the start. Next up, Rivian will launch the smaller R3 crossover and R3X, a tri-motor electric hot hatch.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Tesla (TSLA) obtains ride-hailing permit in California, no robotaxi yet

Published

on

By

Tesla (TSLA) obtains ride-hailing permit in California, no robotaxi yet

Tesla (TSLA) has officially obtained a permit in California to operate an internal fleet for a ride-hailing service, but it’s not for robotaxi yet.

In fact, the automaker hasn’t even applied for an autonomous driving permit yet.

A few weeks ago, it was reported that Tesla had applied for a ride-hailing permit in California.

Even though many linked it to Tesla’s Robotaxi effort, it was specifically for the right to operate an internal fleet of vehicles with drivers to offer a ride-hailing service.

Advertisement – scroll for more content

Tesla had already disclosed that it was offering such a service to its employees in the Bay Area.

Now, the CPUC has confirmed that it has approved Tesla’s application (via Reuters):

The California Public Utilities Commission (CPUC) said it approved Tesla’s application for a transportation charter-party carrier permit (TCP), a license typically associated with chauffeur-operated services, allowing the company to own and control a fleet of vehicles and transport employees on pre-arranged trips.

After Tesla’s stock crashed 5% today, the automaker’s stock went up 1.3% in aftermarket trading on the news.

The speculation is that this is in anticipation of Tesla launching its “robotaxi service”, but a CPUC spokesperson confirmed that the permit doesn’t allow Tesla to do that and that the automaker has yet to apply for a permit that would enable such a service.

Last year, Tesla CEO Elon Musk claimed that Tesla would launch “unsupervised self-driving in Texas and California in Q2 2025.” That’s within the next 4 months.

However, we suspected that this would not be “unsupervised self-driving’ in customer vehicles like Tesla has been promising since 2016, but an internal fleet with teleoperation support in a geo-fenced area for ride-hailing services, much like Waymo has been doing for years.

Sure enough, Musk confirmed last month that this was the plan for Austin in June. We describe this as a “moving of the goal post” for Tesla.

With the focus on Austin in June, Tesla stopped talking about California, which was announced to happen at the same time as Texas last year.

Currently, the prediction market Polymarket puts the odds of Tesla launching robotaxis in California in 2025 at 29%:

Electrek’s Take

As I previously stated, I believe Tesla will use this permit to expand its existing ride-hailing test program in California to non-employees.

It will use that to iron out the ride-hailing system while it continues to work on its self-driving system, which is obviously the hard part to solve.

That said, I wouldn’t be completely shocked if Tesla launched a “robotaxi” in California this year. It just won’t be what Tesla has been promising for years: customer vehicles built since 2016 would be capable of self-driving at a robotaxi-level (4-5 SAE levels).

Instead, it will be an internal fleet with teleoperation support in a geo-fenced area, much like Waymo has been offering in California, Arizona, and Texas for years.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

100+ US-made wind turbines are headed to 2 RWE Texas projects

Published

on

By

100+ US-made wind turbines are headed to 2 RWE Texas projects

GE Vernova is going to supply more than 100 US-made wind turbines to renewables developer RWE for 308 megawatts (MW) of wind projects in west Texas.

RWE is repowering its 127 MW Forest Creek wind farm near Big Spring, Texas, and will kick off construction of the 181 MW Honey Mesquite project in fall 2025. These two projects will deliver 308 MW of clean energy with 109 of GE Vernova’s 2.82 MW wind turbines.

Construction is now officially underway at Forest Creek, bringing some big upgrades that’ll extend the wind farm’s life, which was commissioned in 2006, by another 30 years. The original wind towers, turbines, and other gear are all being decommissioned, and 45 new GE Vernova turbines are each getting fresh foundations. Forest Creek is set to be back online by the end of 2025. RWE is teaming up with Wanzek Construction (part of MasTec Renewables) to recycle or repurpose the old blades, rotors, and nacelles.

Repowering is becoming big business – GE Vernova’s onshore wind business announced in January that it received orders in 2024 to repower over 1 gigawatt (GW) of wind turbines in the US.

Advertisement – scroll for more content

RWE’s new wind farm, Honey Mesquite, in Glasscock County will begin construction later this year and is expected to come online in late 2026.

Together, the two projects will create hundreds of construction jobs and bring in millions in new economic activity to the region. RWE, the US’s third-largest renewables company, says it’s invested $9 billion in Texas since 2007 when Forest Creek first began operations.

Scott Stalica, executive director of North American commercial operations at GE Vernova, said, “These projects are another example of how wind power can support the country’s growing energy needs while creating US jobs and bolstering energy security.”

Texas generates more wind power than any other US state. In 2023, Texas led the US in utility-scale wind-powered electricity generation, producing nearly three-tenths of the country’s total, according to the EIA.


If you live in an area that has frequent natural disaster events, and are interested in making your home more resilient to power outages, consider going solar and adding a battery storage system. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. –trusted affiliate link*

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Dodge Charger EV gets a new ‘Bludicrous’ color and up to $12,500 in discounts

Published

on

By

Dodge Charger EV gets a new 'Bludicrous' color and up to ,500 in discounts

The world’s first electric muscle car, as Dodge calls it, is now arriving at dealerships in a new “Bludicrous” color. Dodge also launched a new virtual experience that lets you create the Charger you’ve been dreaming of right on your phone. To sweeten the deal, Dodge is offering hefty discounts of up to $12,500 on the new Charger Daytona EV.

Dodge launches Charger EV Virtual and big discounts

After the first electric Chargers began arriving at dealerships in January, Dodge introduced a fun, interactive new way for you to create a custom Charger from home.

Since the electric Charger is “loaded with new tech and performance features,” Dodge wants to give you the chance to experience it before you visit the dealership.

The new Dodge Charger Virtual Experience allows you to learn more about the electric muscle car’s performance, technology, design, and more. You can access it by scanning a QR code (shown below).

Advertisement – scroll for more content

You can create your own Dodge Charger Daytona R/T or the 670 horsepower Scat Pack model, choosing from the different colors, interior themes, and package options available. The interactive experience even lets you open and close doors, fold the second-row seats, activate exterior and interior lights, and more.

Dodge-Charger-EV-discounts
Dodge Charger EV in Bludicrous Blue (Source: Stellantis)

The Dodge Charger EV has eight exterior color options, including the new “Bludicrous” blue, which costs an extra $795.

You can choose from After Dark, Destroyer Grey, Diamond Black, Peel Out, Redeye, Triple Nickel, and White Knuckle. Dodge said the new color will also be offered on the upcoming four-door Charger and gas-powered SIXPACK models later this year.

With up to 670 horsepower and 627 lb-ft of torque, the Scat Pack model has “SRT-like performance,” including a 0 to 60 mph sprint in 3.3 seconds. It starts at $73,190.

The Dodge Charger Daytona R/T starts at $59,995 with up to 496 horsepower. If you’re looking for a deal, Dodge launched a $7,500 National Consumer Cash rebate on all 2024 Charger Daytonas.

Dodge Charger Daytona EV trim Horsepower 0 to 60 mph time Starting price
Dodge Charger Daytona R/T 496 hp 4.7 seconds $59,995
Dodge Charger Daytona Scat Pack 670 hp 3.3 seconds $73,190
Dodge Charger EV prices and specs by trim

Combined with a $3,000 National Dodge Performance Days Combo Bonus Cash and a $2,000 conquest cash offer, you can save up to $12,500. Other offers include 0% interest for 72 months and a $3,000 Bonus Cash Allowance or monthly leases as low as $519.

Ready to test out the electric muscle car in real life? We’re here to help you get started. You can use our link to find offers on 2024 and 2025 Dodge Charger EV models at a deal near you.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending