The Anthbot Genie 3000 brings automated mowing tech to your backyard without the need for old-fashioned perimeter wires. It has GPS-grade precision and AI-powered vision, and I got to check out how well it works. With a mix of impressive strengths and a few growing pains, it’s a compelling entrant in the smart‑lawn space worth a closer look.
Setup and specs
There are a few models in the lineup, ranging from $699 to $1,399. I was testing the larger battery version since my parents have some land, and the extra battery makes quicker work of larger plots.
Unboxing the Genie, you’ll find the mower, charging base, RTK GPS station with pole (the mushroom-looking thing), power cables, spare blades, tools, and a quick‑start guide. Unlike some electronics I’ve set up, the quick start guide was actually really well laid out and useful.
The three models in the Genie line:
Advertisement – scroll for more content
600 – up to ~600 m² (0.22 acres)
1000 – up to ~2,000 m² (0.49 acres)
3000 – up to ~3,600 m² (0.89 acres)
The 3000 bumps up the battery to 10 Ah, but they all share the same core specs: a 20 cm (7.9 “) cutting width, adjustable electric deck height (30–70 mm or 1.25 to 2.75 inches), IPX6 waterproofing, and the ability to handle steep slopes, though my Florida testing didn’t exactly put the hill-climbing claims to the test.
Navigation and mapping
This is where the Genie shines. The combo of full‑band RTK GPS plus four AI‑driven cameras enables wire‑free navigation. That means no boundary cables, freeing the mower from the biggest problem with old-fashioned alternatives. Instead, GPS-based boundaries set the limits and your mower is free to do its thing without worrying about a boundary wire breaking one day and your mower making a run for the county line.
Mowing occurs in mostly clean, straight lines, avoiding the chaotic randomness older robot mowers often exhibited. It did seem to have a few areas where it missed on the first run, though it actually went back and got them (mostly), and that got better on subsequent mowing sessions.
Obstacle avoidance is solid. Within its 300° camera field, it claims to detect upwards of 1,000 common objects, sidestepping everything from garden hoses to pets. For me, the occasional potted plant or other obstruction in the yard was pretty easy for the robot to spot.
There are even headlights that seemed quite bright at night (and the very quiet electric mowing meant that it doesn’t disturb anyone when mowing at night).
It’s so cute how it just runs around doing its thing, day or night (though you can program to avoid certain times).
App and smart features
The Genie app is used for setup and lets you define many different mowing zones, draw no‑go zones, tweak cutting height, schedule operations, and monitor battery and progress live, even when you’re away. During setup, I did find that I had to move the mower closer to my router for it to successfully update its firmware, but afterwards it was fine just stealing some signal that leaked out the walls of the house. I guess for the bigger download, it wanted the stronger signal closer to the router.
There are also anti‑theft features, including device‑binding to your Wi‑Fi and account, and a PIN lock so that someone else can’t just take and use your robot. That may be a concern if you live in an area with lots of neighbors, but out in the boonies, I don’t think anyone is looking for robo-mowers.
After nearly 3.5 hours, the robot usually returns to charge, then finishes the second half of the backyard.
Performance and real-world use
The first thing that impressed me about the Genie is how quiet it is. They say it runs at about 58–66 dB, whisper-quiet under normal conditions. You can literally hear the individual grass blades being cut – something I’ve never heard before in all my gasoline-powered mowing years.
The battery seems to last for around 450 to 500 m2 of mowing, or around 3-4 hours, depending on how thick the grass is in that section. Then it returns home to recharge and starts up again where it left off. The mowing width might seem hilariously narrow, just 7.9 inches. But since you’re not actually the one mowing, it doesn’t really matter. My robotic vacuum also has a very narrow vacuum width, but I’m not the one walking around vacuuming, so what do I care? The passes all seem straight and good-looking, so you still get the nice lawn stripes look, though they’re a bit narrower.
The robot performs quite well, and it fulfills my goal which was to make it easier on my 70-year-old parents. It’s not perfect at edging, but if my dad can do 3 minutes of cleaning up along the fence line once in a while instead of an hour of lawn mowing, that’s a major improvement for him.
I don’t know how long these little razor-style blades will last, though they’re pretty cheap and easy to swap out. And I do wish the company made the cable longer between the RTK mushroom and the mower’s base station, so you can get the RTK out a bit further if you need it, but I found a spot that seemed to work for optimal signal for me.
I would say that the Genie 3000 is great for anyone who wants an easy setup process and wire-free operation. There’s no boundary wire to install or to check for breaks. It just works (as long as you have a clear view to the sky for the satellites). But if you’re trying to mow several acres, this little guy probably isn’t the one for you. Anything up to around 3/4 of an acre is where it will shine.
Now I just need to find something that can handle several acres in the pasture behind the backyard…
Sped up 7x, but you get the point.
FTC: We use income earning auto affiliate links.More.
Over the last few days, Elon Musk has been making several statements claiming that autonomous driving systems that use lidar and radar sensors are more dangerous than Tesla’s camera-only computer vision approach because the system gets confused when interpreting data from different sensors.
It’s not only false, Musk told me directly that he agreed that radar and vision could be safer than just vision, right after he had Tesla remove the radars from its vehicles.
Tesla has taken a controversial approach, using only cameras as sensors for driving inputs in its self-driving technology. In contrast, most other companies use cameras in conjunction with radar and lidar sensors.
When Tesla first announced that all its cars produced onward have the hardware capable of “full self-driving” up to level 5 autonomous capacity in 2016, it included a front-facing radar in its self-driving hardware suite.
Advertisement – scroll for more content
However, in 2021, after not having achieved anything more than a level 2 driver assist (ADAS) system with its self-driving effort, Elon Musk announced a move that he called “Tesla Vision”, which consists of moving Tesla’s self-driving effort only to use inputs from cameras.
Here’s what I wrote in 2021 about Musk sharing his plan for Tesla to only use cameras and neural nets:
CEO Elon Musk has been hyping the vision-only update as “mind-blowing.” He insists that it will lead to a true level 5 autonomous driving system by the end of the year, but he has gotten that timeline wrong before.
We are now in 2025, and unlike what Musk claimed, Tesla has yet to deliver on its self-driving promises, but the CEO is doubling down on his vision-only approach.
The controversial billionaire is making headlines this week for a series of new statements attacking Tesla’s self-driving rivals and their use of radar and lidar sensors.
Earlier this week, Musk took a jab at Waymo and claimed that “lidar and radar reduce safety”:
Lidar and radar reduce safety due to sensor contention. If lidars/radars disagree with cameras, which one wins? This sensor ambiguity causes increased, not decreased, risk. That’s why Waymos can’t drive on highways.We turned off radars in Teslas to increase safety. Cameras ftw.
The assertion that “Waymos can’t drive on highways” is simply false. Waymo has been conducting fully driverless employee testing on freeways in Phoenix, San Francisco, and Los Angeles for years, and it is expected to make this technology available to rider-only rides soon.
Tesla is in a similar situation with its Robotaxi: they don’t drive on freeways without an employee supervisor.
Musk later added:
LiDAR also does not work well in snow, rain or dust due to reflection scatter. That’s why Waymos stop working in any heavy precipitation. As I have said many times, there is a role for LiDAR in some circumstances and I personally oversaw the development of LiDAR for the SpaceX Dragon docking with Space Station. I am well aware of its strengths and weaknesses.
It’s not true that Waymos can’t work in “any heavy precipitation.”
Here’s a video of a Waymo vehicle driving by itself in heavy rain:
In comparison, Tesla’s own Robotaxi terms of service mention that it “may be limited or unavailable in inclement weather.”
There’s plenty of evidence that Musk is wrong and misleading with these statements, but furthermore, he himself admitted that radar sensors can make Tesla’s vision system safer.
‘Vision with high-res radar would be better than pure vision’
In May 2021, as Tesla began removing radar sensors from its vehicle lineup and transitioning to a vision-only approach, I was direct messaging (DMing) Musk to learn more about the surprising move.
In the conversation, he was already making the claim that sensor contention is lowering safety as he did this week in new comments attacking Waymo.
He wrote at the time:
The probability of safety will be higher with pure vision than vision+radar, not lower. Vision has become so good that radar actually reduces signal/noise.
However, what was more interesting is what he said shortly after claiming that:
Musk admitted that “vision with high-resolution radar would be better than pure vision”. However, he claimed that such a radar didn’t exist.
In the same conversation, I pointed Musk to existing high-definition millimeter wave radars, but he didn’t respond.
It was still early for that technology in 2021, but high-definition millimeter wave radars are now commonly used by companies developing autonomous driving technologies, including Waymo.
Waymo uses six high-definition radars in its system:
In short, Musk was already concerned about sensor contention in 2021, but he admitted that the problem would be worth solving with higher-definition radars, which already existed then and are becoming more common now.
Yet, he criticizes companies using radar and lidar, which work similarly to high-resolution radars but on different wavelengths, for even attempting sensor fusion.
It’s not impossible because Tesla can’t do it
Part of the problem here appears to be that Musk thinks something doesn’t work because Tesla can’t make it work, and he doesn’t want to admit that others are solving the sensor fusion problem.
Tesla simply couldn’t solve sensor fusion, so it focused on achieving autonomy solely through camera vision. However, those who continued to work on the issue have made significant progress and are now reaping the rewards.
Waymo and Baidu, both of which have level 4 autonomous driving systems currently commercially operating without supervision, unlike Tesla, have heavily invested in sensor fusion.
Amir Husain, an AI entrepreneur who sits on the Boards of Advisors for IBM Watson and the Department of Computer Science at UT Austin, points to advancements in the use of Kalman filters and Bayesian techniques to solve sensor noise covariance.
He commented on Musk’s statement regarding the use of radar and lidar sensors:
The issue isn’t a binary disagreement between two sensors. It generates a better estimate than any individual sensor can produce on its own. They all have a margin of error. Fusion helps reduce this.
If Musk’s argument held, why would the human brain use eyes, ears, and touch to estimate object location? Why would aircraft combine radar, IRST, and other passive sensors to estimate object location? This is a fundamental misunderstanding of information theory. Every channel has noise. But redundancy reduces uncertainty.
Musk’s main argument to focus on cameras and neural nets has been that the roads are designed for humans to drive and humans drive using their eyes and brain, which are the hardware and software equivalent of cameras (eyes) and neural nets (brain).
Now, most other companies developing autonomous driving technologies are also focusing on this, but to surpass humans and achieve greater levels of safety through precision and redundancy, they are also adding radar and lidar sensors to their systems.
Electrek’s Take
Musk painted Tesla into a corner with its vision-only approach, and now he is trying to mislead people into thinking that it is the only one that can work, when there’s no substantial evidence to support this claim.
Now, let me be clear, Musk is partly correct. When poorly fused, multi-sensor data introduces noise, making it more challenging to operate an autonomous driving system.
However, who said that this is an unsolvable problem? Others appear to be solving it, and we are seeing the results in Waymo’s and Baidu’s commercially available rider-only taxi services.
If you can take advantage of radar’s ability to detect distance and speed as well as work through rain, fog, dust, and snow, why wouldn’t you use it?
As he admitted in the DMs with me in 2021, Musk is aware of this – hence why he acknowledged that high-resolution radar combined with vision would be safer than vision alone.
The problem is that Tesla hasn’t focused on improving sensor fusion and radar integration in the last 4 years because it has been all-in on vision.
Now, Tesla could potentially still solve self-driving with its vision system, but there’s no evidence that it is close to happening or any safer than other systems, such as Waymo’s, which use radar and lidar sensors.
In fact, Tesla is still only operating an autonomous driving system under the supervision of in-car employees with a few dozen cars, while Waymo has been doing rider-only rides for years and operates over 1,500 autonomous vehicles in the US.
Just like with his “Robotaxi” with supervisors, Musk is trying to create the illusion that Tesla is not only leading in autonomy, but it is the only one that can solve it.
FTC: We use income earning auto affiliate links.More.
Trump’s Interior Department halted construction on 704 megawatt (MW) Revolution Wind, the US’s first multi-state offshore wind project that’s already 80% complete. Grid operator ISO New England says the decision is a threat to the grid.
ISO New England released a statement responding to the stop-work order, warning that “delaying the project will increase risks to reliability.”:
As demand for electricity grows, New England must maintain and add to its energy infrastructure. Unpredictable risks and threats to resources – regardless of technology – that have made significant capital investments, secured necessary permits, and are close to completion will stifle future investments, increase costs to consumers, and undermine the power grid’s reliability and the region’s economy now and in the future.
Revolution Wind, a joint development between Ørsted and BlackRock’s Global Infrastructure Partners, is a 65-turbine project capable of powering around 350,000 homes in Rhode Island and Connecticut once it’s complete. It was expected to come online next year. The project has created more than 1,200 jobs.
On August 22, the director of Bureau of Ocean Energy Management sent a vague letter to Ørsted commanding it to halt all activities on the fully permitted Revolution Wind, citing “national security interests,” yet providing no details.
Advertisement – scroll for more content
BOEM’s Record of Decision for Revolution Wind, reported in 2023 in Section 4.6, page 185, states that the national security effects of the project would be “negligible and avoidable.”
This latest move echoes Trump’s cancellation in April of New York’s $5 billion Empire Wind 1 project, which was already under construction off New York’s coast. No viable reasons were given for that stop-work order either, and the cancellation was reversed in May.
Kit Kennedy, managing director for power at Natural Resources Defense Council (NRDC), released the following statement in response to the Revolution Wind order:
The Trump administration’s war on the electricity needed to power the grid continues on all fronts. Halting Revolution Wind is a devastating attack on workers, on electricity customers, and on the investment climate in the US.
New England homeowners will feel this when they tear open their electricity bills and look at the surging costs of keeping the lights on.
This administration has it exactly backwards. It’s trying to prop up clunky, polluting coal plants while doing all it can to halt the fastest growing energy sources of the future – solar and wind power.
It makes no sense to say we have an energy emergency and then make decisions like this. Unfortunately, every American is paying the price for these misguided actions.
The 30% federal solar tax credit is ending this year. If you’ve ever considered going solar, now’s the time to act. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.
FTC: We use income earning auto affiliate links.More.
Tesla is teasing a new product release on Friday, August 29th, coming to Europe and the Middle East. It’s likely going to be the Model Y Performance.
On X today, Tesla has teased an upcoming product release coming this friday.
The post is cryptic. It only mentions ‘spoiler alert’ and the date August 29 with what looks like a close up of a vehicle with what appears to be a spoil – hence the “spoiler alert” reference:
There are main suspect is the Model Y Performance due to the spoiler reference.
Advertisement – scroll for more content
Since the Model Y refresh in January, Tesla stopped selling the Model Y Performance. It is due to launch the top performance version under the new design.
When Tesla released the Model 3 refresh in 2024, it took about 4 months for Tesla to launch the new performance version.
Electrek’s Take
The only thing that I find strange with this likely being the Model Y Performance is the fact that they tweeted this from the Europe and Middle East account.
It would be strange for the Model Y Performance to launch there first, but who knows. Maybe Tesla started production at Gigafactory Berlin first.
I don’t think this will have a major impact on Tesla’s business. The Model Y Performance is the least popular version of the best-selling Model Y.
We don’t have the full mix of sales, but I wouldn’t be suprised if it represents less than 10% of Tesla’s Model Y deliveries.
The Model 3 Performance is probably a more popular option within the Model 3 lineup as it is a lot more fun to drive.
FTC: We use income earning auto affiliate links.More.