Connect with us

Published

on

Tesla issued another “safety recall,” a term the company doesn’t like because the recall didn’t require a physical recall of the 30,000 vehicles affected. An over-the-air software update was the fix.

Earlier this year, NHTSA issued a series of recalls on Tesla vehicles that were highly reported in the media.

What was less reported, though, is that almost all of those recalls were fairly simple software issues that Tesla has been able to fix through over-the-air software updates.

Whenever there’s a safety-related issue, NHTSA has to issue a “safety recall,” even if the automaker doesn’t have to physically recall any vehicle, which leads to some confusion.

Again last month, a Tesla recall of “1 million vehicles” made many headlines when the recall simply consisted of Tesla changing how its software handled window operations. These instances have led Tesla CEO Elon Musk to complain about the term “recall” and how it is being used against Tesla by the media.

We get another example today of such “recall.” NHTSA released a voluntary recall notice from Tesla for about 30,000 Model X vehicles related to airbag deployment behavior for small children in the front seat:

On certain 2021-2023 Model X vehicles, the restraint control module (RCM) calibration may result in the frontal passenger airbag deploying in an unintended configuration during certain low-speed collision events. This may result in noncompliance with FMVSS 208, Sections 21.4 and 23.4, when a 3- or 6-year-old front passenger, respectively, is unbelted and out of position.

According to the recall notice, Tesla started pushing an over-the-air software update to fix the issue earlier this week:

In a low-speed collision event where a 3- or 6-year-old front passenger is unbelted and out of position, the remedy OTA firmware update ensures that the frontal passenger airbag complies with FMVSS 208, Sections 21.4 and 23.4, whereas a firmware release without the remedy does not ensure compliance.

Here’s the chronology of the recall:

  • On October 18, 2022, Tesla conducted a pre-scheduled Conformity of Production test to confirm compliance with FMVSS 208 on a current production Model X vehicle. In the test, the vehicle restraint system deployment logic did not operate as designed.
  • On October 25, 2022, additional tests were conducted to confirm the results of the test conducted on October 18, 2022.
  • Between November 2 – 7, 2022, based on the results of two prior tests, Tesla conducted out of position confirmatory tests to assess compliance with FMVSS 208, Sections 21, 23, and 25.
  • On November 8, 2022, test results were analyzed, and non-compliance was verified with Sections 21.4 and 23.4. A voluntary recall determination was made on the same day.
  • As of November 8, 2022, Tesla is not aware of any warranty claims, field reports, crashes, injuries, or deaths related to this condition.

FTC: We use income earning auto affiliate links. More.

graphical user interface, website

Continue Reading

Environment

World’s largest EV maker unveils new sodium battery electric motorbikes

Published

on

By

World's largest EV maker unveils new sodium battery electric motorbikes

Yadea, which has claimed the title of the world’s largest electric vehicle maker for seven years running, has just announced a new electric motorbike powered by the company’s innovative HuaYu sodium-ion battery technology.

Yadea has long dominated the electric two-wheeler and three-wheeler market globally, but has generally relied on both lithium-ion and lead acid batteries to power its vehicles in different markets.

The newly unveiled electric scooter uses Yadea’s recently introduced sodium battery technology, offering what the company says is outstanding performance in range, charging speed, and safety. Using the HuaYu Sodium Superfast Charging Ecosystem presented by Yadea, the battery can reach 80% charge in just 15 minutes, providing greater convenience for riders.

Yadea’s sodium battery has successfully passed more than 20 safety tests, many focusing on its resistance to fire and explosions under extreme conditions like punctures and compression.

Yadea’s new sodium battery offers an energy density of 145 Wh/kg and a lifespan of up to 1,500 cycles at room temperature, with the company rating it for a five-year useful lifespan. It also includes a three-year warranty for added assurance.

With excellent low-temperature capabilities, the battery retains over 92% of its discharge capacity at -20°C, making it well-suited for colder climates.

Sodium batteries present major advantages

Most electric vehicles used in the West, especially electric two-wheelers, rely on lithium-ion batteries for their high energy density. But sodium-ion batteries offer many benefits over traditional lithium-ion batteries.

Sodium is an abundant element on the planet and is easily accessible, unlike lithium, which is concentrated in specific regions and often expensive to extract. This abundance can make sodium-ion batteries cheaper to produce, reducing costs for EV manufacturers and potentially making electric vehicles more affordable.

Lithium mining also has environmental challenges, such as water depletion and habitat destruction. Sodium, on the other hand, can be sourced from seawater or common salts, offering a more sustainable and environmentally friendly option.

Sodium-ion batteries are less prone to overheating and thermal runaway compared to lithium-ion batteries. This makes them inherently safer for electric vehicles, reducing the risk of fires and improving consumer confidence in EV technology.

Sodium-ion batteries perform better than lithium-ion in cold climates. Lithium-ion batteries struggle with capacity retention in freezing conditions, but sodium batteries maintain efficiency, making them ideal for EVs in colder regions.

Sodium batteries still have challenges to overcome

While sodium-ion batteries are promising, they currently have a lower energy density than lithium-ion batteries, meaning they store less energy per unit of weight.

For EVs, this translates to shorter driving ranges for the same-sized battery. That’s especially important in electric two-wheelers like motorbikes and electric bicycles, which don’t have much extra space for storing bulky batteries.

However, advancements in cathode materials and battery architecture are quickly closing this gap, which Yadea has demonstrated. These sodium-ion batteries still can’t match the energy density of lithium-ion batteries, but as they continue to improve their energy density, the technology’s other major advantages provide encouraging signs for larger adoption in the industry.

Yadea’s status as a major electric motorbike maker also means that its adoption of sodium-ion battery technology could help lead the entire industry towards this battery chemistry, bringing safety and performance benefits along with it.

Last year I had the unique opportunity to visit one of Yadea’s global manufacturing sites.

To see inside the company’s massive and highly-automated manufacturing processes, check out the video below!

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

CES2025 | John Deere autonomous mower promises a perfect cut, every time

Published

on

By

CES2025 | John Deere autonomous mower promises a perfect cut, every time

At CES2025, the impressively built-out John Deere exhibit was all about automation. Autonomous job sites, autonomous farms … but it was this new, battery electric, autonomous lawn mowing robot that stole the show.

The self-driving Deere mower robot was positively dwarfed by the giant farm machinery surrounding it, but it continues to prove that humans will pack bond with anything as more than one burly-looking and grizzled man asked what its name was. (It’s Howard. I’ll fight you.)

For his part, Howard packs a 21.4 kWh battery pack that runs a suite of electric motors that includes a drive motor and three cutting blade motors spread across a 60 inch cutting deck – but it’s not the electric motors that make John Deere’s little robot mower cool, it’s the way it works.

See, instead of using “just” GPS data or “just” repeating a pre-recorded run, Howard can do something in between. The way it was explained to me, you would ride the stand-up mower around the perimeter of the area you wanted to mow, select a pattern, then hop off, fold up the platform, and let it loose. Howard mows just the way you would, leaving you to focus on edging, planting, or (let’s face it) schmoozing with the clients.

It’s exactly the sort of help landscapers are looking for.

But that should come as no surprise, of course. John Deere, perhaps more than most companies, knows its customer. “We’ve been in the turf business for 60 years — it’s a core part of Deere,” says Jahmy Hindman, chief technology officer at John Deere, explaining things beautifully. “The work that’s being done in this industry is incredibly labor intensive … they’re not just doing the mowing work. They’re doing the tree trimming, maintaining flowerbeds and all these other jobs. The mowing is table stakes, though, for them to get the business. It’s the thing they have to do in order to get the higher value work.”

Tim Lewis, lead engineer with the commercial automatous mower, told Lawn & Landscape that the industry in general has a high turnover rate as well, making it difficult to hang to people who know where one job ends and another begins. “There’s a lot of nuances it takes to do these jobs effectively,” he explains, “so “Autonomy can help with that.”

The John Deere autonomous commercial mower (there’s no snazzy alphanumeric, yet) leverages the same camera technology as other Deere autonomous machines, but on a smaller scale (since the machine has a smaller footprint). With two cameras each on the front, left, right, and rear sides of the little guy, he has a 360-degree view of the world and enough AI to lay down a pattern, avoid an obstacle, and shut off if it thinks it’s about to mow down something (read: someone) it shouldn’t.

John Deere will have Howard on display through tomorrow at CES in the LVCC’s West Hall. If you’re in town, be sure to go say hi.

John Deere CES2025

SUOURCE | IMAGES: John Deere; Electrek.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Tesla sales fall, Honda brings back ASIMO, and a bunch of stuff from CES2025

Published

on

By

Tesla sales fall, Honda brings back ASIMO, and a bunch of stuff from CES2025

Despite big discounts and 0% financing, Tesla sales are down for the first time in a decade … but there’s even bigger robot news with the return of Honda ASIMO, a flying car from China, and a whole lot more from today’s episode of Quick Charge!

CES2025 was all about AI – and not just what AI could do, but what AI could do for you. That’s where ASIMO comes in, helping everyone have a better time in there car and not at all just a modern day version of KITT dreamed up by a bunch of Gen X executives (wink, wink). We also cover some neat stuff from Suzuki, Aptera, Volvo, and more. Enjoy!

Prefer listening to your podcasts? Audio-only versions of Quick Charge are now available on Apple PodcastsSpotifyTuneIn, and our RSS feed for Overcast and other podcast players

New episodes of Quick Charge are recorded, usually, Monday through Thursday (and sometimes Sunday). We’ll be posting bonus audio content from time to time as well, so be sure to follow and subscribe so you don’t miss a minute of Electrek’s high-voltage daily news!

Got news? Let us know!
Drop us a line at tips@electrek.co. You can also rate us on Apple Podcasts and Spotify, or recommend us in Overcast to help more people discover the show.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending