Connect with us

Published

on

Aptera has confirmed that it plans to use Tesla’s charge connector, now known as the North American Charging Standard (NACS), in its upcoming solar electric car.

Earlier this month, Tesla surprised many by announcing that it is opening its EV charge connector in the hope of making it the new standard in North America.

At the time, we reported that Aptera might have had a hand in Tesla deciding to open in charge connector to the industry.

Aptera is a California-based company building a battery and solar-powered super-efficient three-wheeler electric car. It claims a range of up to 1,000 miles and achieves that by making the vehicle extremely lightweight, with three wheels and a drag coefficient (Cd) of only 0.13.

When you are building a super-efficient vehicle like that, every little bit of volume and weight improvement is important down to the connector, and an early prototype of the Aptera SEV featured a Tesla connector.

Tesla North American Charging Standard (NACS)

A few months prior to Tesla opening its charging standard, Aptera launched a petition for Tesla’s charge connector to become the new standard for electric vehicles in North America. It gathered almost 40,000 signatures before Tesla got on board.

Now in an email to reservation holders and investors, Aptera thanked its community for helping push the petition and confirmed that it now plans to integrate Tesla’s connector, now the North American Charging Standard (NACS):

Remember when our founders started a conversation about the need for a greater emphasis on efficiency and accessibility in EV charging infrastructure? Steve and Chris launched a petition urging policymakers to implement Tesla’s connector and plug (now NACS) as the standard for EV charging in the U.S. With your support, the petition continues to gain momentum. It has received over 40,000 signatures and counting. And just four months later, Tesla announced its decision to open its connector design to the world. We are willing to bet the buzz you generated around the petition played a part in this, and we look forward to incorporating NACS in our sEVs. Thank you for challenging the status quo. 

In the coming months, Aptera is planning to start production of its electric solar car, which starts at $25,900. Deliveries are expected to start next year, and there is already a lot of demand for the vehicle.

The company says that it has accumulated over 37,000 reservations, which each require a $100 deposit (or $70 if you use a referral code).

Electrek’s Take

This could be an awesome development. Aptera would have the best connector design, and it’s going to be a lot easier to adopt now that Tesla has released the technical details.

On the other hand, it could also work great for Tesla.

As we previously reported, Tesla might have a less than altruistic motivation to open its charging standard – even though most people would agree it’s the best.

The US government recently unlocked billions of dollars in funding for EV charging stations, and while the government didn’t require those stations to work with the CCS connector, it did require that the charging stations receiving funding work with EVs “from more than one automaker.”

For now, this requirement disqualifies Tesla’s Supercharger stations, but if only one automaker decides to adopt Tesla’s connector, or now the North American Charging Standard (NACS), it would qualify Tesla’s Supercharger network for incentives.

If Aptera vehicles had the NACS connector and access to Tesla Superchargers, the automaker’s new charging stations would qualify for the subsidies. It would be a win-win for Tesla and Aptera.

I wouldn’t be shocked if Tesla got involved with Aptera. That would be awesome.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Europe’s wind power hits 20%, but 3 challenges stall progress

Published

on

By

Europe’s wind power hits 20%, but 3 challenges stall progress

Wind energy powered 20% of all electricity consumed in Europe (19% in the EU) in 2024, and the EU has set a goal to grow this share to 34% by 2030 and more than 50% by 2050.

To stay on track, the EU needs to install 30 GW of new wind farms annually, but it only managed 13 GW in 2024 – 11.4 GW onshore and 1.4 GW offshore. This is what’s holding the EU back from achieving its wind growth goals.

Three big problems holding Europe’s wind power back

Europe’s wind power growth is stalling for three key reasons:

Permitting delays. Many governments haven’t implemented the EU’s new permitting rules, making it harder for projects to move forward.

Grid connection bottlenecks. Over 500 GW(!) of potential wind capacity is stuck in grid connection queues.

Slow electrification. Europe’s economy isn’t electrifying fast enough to drive demand for more renewable energy.

Brussels-based trade association WindEurope CEO Giles Dickson summed it up: “The EU must urgently tackle all three problems. More wind means cheaper power, which means increased competitiveness.”

Permitting: Germany sets the standard

Permitting remains a massive roadblock, despite new EU rules aimed at streamlining the process. In fact, the situation worsened in 2024 in many countries. The bright spot? Germany. By embracing the EU’s permitting rules — with measures like binding deadlines and treating wind energy as a public interest priority — Germany approved a record 15 GW of new onshore wind in 2024. That’s seven times more than five years ago.

If other governments follow Germany’s lead, Europe could unlock the full potential of wind energy and bolster energy security.

Grid connections: a growing crisis

Access to the electricity grid is now the biggest obstacle to deploying wind energy. And it’s not just about long queues — Europe’s grid infrastructure isn’t expanding fast enough to keep up with demand. A glaring example is Germany’s 900-megawatt (MW) Borkum Riffgrund 3 offshore wind farm. The turbines are ready to go, but the grid connection won’t be in place until 2026.

This issue isn’t isolated. Governments need to accelerate grid expansion if they’re serious about meeting renewable energy targets.

Electrification: falling behind

Wind energy’s growth is also tied to how quickly Europe electrifies its economy. Right now, electricity accounts for just 23% of the EU’s total energy consumption. That needs to jump to 61% by 2050 to align with climate goals. However, electrification efforts in key sectors like transportation, heating, and industry are moving too slowly.

European Commission president Ursula von der Leyen has tasked Energy Commissioner Dan Jørgensen with crafting an Electrification Action Plan. That can’t come soon enough.

More wind farms awarded, but challenges persist

On a positive note, governments across Europe awarded a record 37 GW of new wind capacity (29 GW in the EU) in 2024. But without faster permitting, better grid connections, and increased electrification, these awards won’t translate into the clean energy-producing wind farms Europe desperately needs.

Investments and corporate interest

Investments in wind energy totaled €31 billion in 2024, financing 19 GW of new capacity. While onshore wind investments remained strong at €24 billion, offshore wind funding saw a dip. Final investment decisions for offshore projects remain challenging due to slow permitting and grid delays.

Corporate consumers continue to show strong interest in wind energy. Half of all electricity contracted under Power Purchase Agreements (PPAs) in 2024 was wind. Dedicated wind PPAs were 4 GW out of a total of 12 GW of renewable PPAs. 

Read more: Renewables could meet almost half of global electricity demand by 2030 – IEA


If you live in an area that has frequent natural disaster events, and are interested in making your home more resilient to power outages, consider going solar and adding a battery storage system. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. –trusted affiliate link*

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Podcast: New Tesla Model Y unveil, Mazda 6e, Aptera solar car production-intent, more

Published

on

By

Podcast: New Tesla Model Y unveil, Mazda 6e, Aptera solar car production-intent, more

In the Electrek Podcast, we discuss the most popular news in the world of sustainable transport and energy. In this week’s episode, we discuss the official unveiling of the new Tesla Model Y, Mazda 6e, Aptera solar car production-intent, and more.

The show is live every Friday at 4 p.m. ET on Electrek’s YouTube channel.

As a reminder, we’ll have an accompanying post, like this one, on the site with an embedded link to the live stream. Head to the YouTube channel to get your questions and comments in.

After the show ends at around 5 p.m. ET, the video will be archived on YouTube and the audio on all your favorite podcast apps:

We now have a Patreon if you want to help us avoid more ads and invest more in our content. We have some awesome gifts for our Patreons and more coming.

Here are a few of the articles that we will discuss during the podcast:

Here’s the live stream for today’s episode starting at 4:00 p.m. ET (or the video after 5 p.m. ET):

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

BYD’s new Han L EV just leaked in China and it’s a monster

Published

on

By

BYD's new Han L EV just leaked in China and it's a monster

The Chinese EV leader is launching a new flagship electric sedan. BYD’s new Han L EV leaked in China on Friday, revealing a potential Tesla Model S Plaid challenger.

What we know about the BYD Han L EV so far

We knew it was coming soon after BYD teased the Han L on social media a few days ago. Now, we are learning more about what to expect.

BYD’s new electric sedan appeared in China’s latest Ministry of Industry and Information Tech (MIIT) filing, a catalog of new vehicles that will soon be sold.

The filing revealed four versions, including two EV and two PHEV models. The Han L EV will be available in single- and dual-motor configurations. With a peak power of 580 kW (777 hp), the single-motor model packs more power than expected.

BYD’s dual-motor Han L gains an additional 230 kW (308 hp) front-mounted motor. As CnEVPost pointed out, the vehicle’s back has a “2.7S” badge, which suggests a 0 to 100 km/h (0 to 62 mph) sprint time of just 2.7 seconds.

BYD-Han-L-EV
BYD Han L EV (Source: China MIIT)

To put that into perspective, the Tesla Model S Plaid can accelerate from 0 to 100 km in 2.1 seconds. In China, the Model S Plaid starts at RBM 814,900, or over $110,000. Speaking of Tesla, the EV leader just unveiled its highly anticipated Model Y “Juniper” refresh in China on Thursday. It starts at RMB 263,500 ($36,000).

BYD already sells the Han EV in China, starting at around RMB 200,000. However, the single front motor, with a peak power of 180 kW, is much less potent than the “L” model. The Han EV can accelerate from 0 to 100 km/h in 7.9 seconds.

BYD-Han-L-EV
BYD Han L EV (Source: China MIIT)

At 5,050 mm long, 1,960 mm wide, and 1,505 mm tall with a wheelbase of 2,970 mm, BYD’s new Han L is roughly the size of the Model Y (4,970 mm long, 1,964 mm wide, 1,445 mm tall, wheelbase of 2,960 mm).

Other than that it will use a lithium iron phosphate (LFP) pack from BYD’s FinDreams unit, no other battery specs were revealed. Check back soon for the full rundown.

Source: CnEVPost, China MIIT

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending