Connect with us

Published

on

Regularly readers of my Awesomely Weird Alibaba Electric Vehicle of the Week column will know that I usually dig around Chinese shopping sites to find the wackiest and coolest little EVs in the world. That’s resulted in finding everything from electric submarines to mini electric Jeeps. But this time I’d say that today’s vehicles are less weird and more awesome, especially if you’ve been looking for your own electrically-powered construction equipment for your property or work site. These little electric mini loaders could be the perfect size for hobby farms and small ranches. And they’re pretty darn affordable, too!

I’ve looked into electric loaders before, and even covered another one over a year ago. But electric mini loaders from China have come a long way, as you can see by the latest models.

I stumbled upon this company Aolite, which manufacturers a pile of construction equipment from pint-sized to massive. They’ve expanded into electrically-powered construction equipment lately and two of their loaders have caught my eye.

Their first model, which seems to be produced by a number of sources, is the Aolite 604. It’s a 1,120 kg (2,470 lb) mini loader that can lift up to 400 kg (880 lb) in its front bucket. It zips around at between 10-18 km/h (6-11 mph) depending on what gear you keep it in, and gets powered by a pair of 1800W motors for the four-wheel-drive system. A third 3,000W motor runs the hydraulic system, which includes a third circuit (in addition to the lifting and dumping circuit) to create a quick hitch system or power hydraulic accessories like gripper buckets, digger attachments, etc.

The lead acid batteries aren’t fancy, but they help add to the ballast weight and give the electric loader a run time of 6-7 hours. And of course the lack of a diesel engine has a long list of advantages. You don’t spend hours on end breathing in a toxic cloud of carcinogens, you don’t have to wear ear protection to avoid slowly going deaf, the entire vehicle isn’t vibrating the entire time, and it can even be used indoors for interior demolitions and reconstruction!

electric mini loader

For those that want something even bigger, the Aolite 606 loader is nearly twice the size, weighing in at 2,050 kg (4,520 lb). It has a more powerful lifting capacity of up to 700 kg (1,540 lb) from a larger bucket. The two drive motors are each 3,500W, with a larger 5,000W motor powering the hydraulic system.

And check out how affordable these little loaders are. The smaller electric mini loader model is priced at US $4,900 for a single unit, though the price drops to US $4,500 if you buy ten of them.

The 606 loader is a bit pricer, coming in at US $8,300 for a single unit. Just like the 604 model, the price drops as you buy more. Pick up eight of these bad boys and they’re a modest US $7,500 a piece. For comparison, a similarly spec’d diesel-powered Bobcat L23 articulated loader is priced at around US $40,000.

Both of these loaders come with a ton of optional accessories (that each cost several hundred dollars) and that can be swapped in place of the traditional loader bucket. Unfortunately they are’t compatible with each other due to the 606’s larger size.

They’ve got grass forks, pallet forks, grapple buckets, snow sweepers/plows/blowers, concrete mixing buckets, grain buckets, augers, hammers, 4-in-1 buckets, barrel clamps, and more!

The company even has an articulating electric fork lift built on a similar chassis, though I’m not sure I can find as many uses for a fork lift.

Since the loaders can come with a pallet fork for an extra couple hundred bucks, you can easily turn them into small fork lifts, even if they don’t have the same lifting height as the real fork lift offered by Aolite.

Now here’s the thing: as my regular readings will again already know, most of the time I just enjoy finding fun EVs on Alibaba by window shopping, but I’ve been known to actually buy the ones that really strike my fancy. That how I would up with an electric mini truck and a 5-seater electric boat, among other odd purchases.

And now I’m seriously considering getting an electric mini loader. For context: my parents own a small ranch with 10 acres of land, which is where my mini-truck lives out its days as a work truck (which is good since it’s not technically street-legal). An electric loader that does overtime as a small tractor would be useful to have on the property, and these might fit the bill.

So I’ve inquired about what goes into buying one of these, which led me down a road to realize I’m probably getting in over my head — but that’s fine, I’ll just buy a snorkel too.

The company’s sales rep “Alison” has been helping me, and she’s a peach. I didn’t even tell her I’m internet famous for buying questionable stuff on Alibaba or that I write this column, but she’s been helping me figure out all the options for models, accessories, packing and shipping to the US.

You see, you can’t just buy one of these since most freight companies won’t let you do LCL (less than container load) shipping, which is where the cargo is just tossed in a shared container and you only pay for the space you take up. That’s how I shipped my boat from China, but that only weighed 400-something-pounds.

So basically, I’d need to import an entire container of these electric mini loaders if I wanted one. A full 40ft container would fit 10 of the smaller loaders or 8 of the bigger loaders. That’s a bit much for me, but it turns out you can get a half-sized 20ft container that will fit four of either model.

electric mini loader packing

The only problem is I don’t need four. I need one. Or maybe two, if I want one of the big ones and one of the little ones. I don’t know what I’d do with four electric mini loaders. Maybe buy a 6-ft beach ball and play 2-on-2 loader soccer with them?

That’s a bridge I’m still trying to figure out how to cross. If anyone lives within trucking range of South Florida and wants to buy a mini loader, talk to me.

I’m not sure how far I plan to go down this rabbit hole, but the more I look at these things, and the more I watch videos like the one below, the more I start to wonder how I’ve made it this far in life without my own backyard electric mini loader. There’s a decent chance you’ll see me in another month or so with a follow up article: Oops, I bought a container load of Chinese construction equipment.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Caterpillar is putting MASSIVE 240-ton electric haul truck to work in Vale mine

Published

on

By

Caterpillar is putting MASSIVE 240-ton electric haul truck to work in Vale mine

Mining company Vale is turning to Caterpillar to provide this massive, 240-ton battery-electric haul truck in a bid to slash carbon emissions at its mines by 2030.

Caterpillar and Vale have signed an agreement that will see the Brazilian mining company test severe-duty battery electric mining trucks like the 793 BEV (above), as well as V2G/V2x energy transfer systems and alcohol-powered trucks. The test will help Vale make better equipment choices as it works to achieve its goals of reducing direct and indirect carbon emissions 33% by 2030 and eliminating 100% of its net emissions by 2050.

If that sounds weird, consider that most cars and trucks in Brazil run on either pure ethyl alcohol/ethanol (E100) or “gasohol” (E25).

“We are developing a portfolio of options to decarbonize Vale’s operations, including electrification and the use of alternative fuels in the mines. The most viable solutions will be adopted,” explains Ludmila Nascimento, energy and decarbonization director Vale. “We believe that ethanol has great potential to contribute to the 2030 target because it is a fuel that has already been adopted on a large scale in Brazil, with an established supply network, and which requires an active partnership with manufacturers. We stand together to support them in this goal.”

Vale will test a 240-ton Cat 793 battery-electric haul truck at its operations in Minas Gerais, and put energy transfer solutions to a similar tests at Vale’s operations in Pará over the next two-three years. Caterpillar and Vale have also agreed to a joint study on the viability of a dual-fuel (ethanol/diesel) solution for existing ICE-powered assets.

Vale claims to be the world’s largest producer of iron ore and nickel, and says it’s committed to an investment of between $4 billion to $6 billion to meet its 2030 goal.

Cat 793 electric haul truck

During its debut in 2022, the Cat 793 haul truck was shown on a 4.3-mile test course at the company’s Tucson proving grounds. There, the 240-ton truck was able to achieve a top speed of over 37 mph (60 km/h) fully loaded. Further tests involved the loaded truck climbing a 10% grade for a full kilometer miles at 7.5 mph before unloading and turning around for the descent, using regenerative braking to put energy back into the battery on the way down.

Despite not giving out detailed specs, Caterpillar reps reported that the 793 still had enough charge in its batteries for to complete more testing cycles.

Electrek’s Take

Caterpillar-electric-mining-truck
Cat 793 EV at 2022 launch; via Caterpillar.

Electric equipment and mining to together like peanut butter and jelly. In confined spaces, the carbon emissions and ear-splitting noise of conventional mining equipment can create dangerous circumstances for miners and operators, and that can lead to injury or long-term disability that’s just going to exacerbate a mining operation’s ability to keep people working and minerals coming out of the ground.

By working with companies like Vale to prove that forward-looking electric equipment can do the job as well as well as (if not better than) their internal combustion counterparts, Caterpillar will go a long way towards converting the ICE faithful.

SOURCES | IMAGES: Caterpillar, Construction Equipment, and E&MJ.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Argonne Nat’l Lab is spending big bucks to study BIG hydrogen vehicles

Published

on

By

Argonne Nat'l Lab is spending big bucks to study BIG hydrogen vehicles

Argonne National Laboratory is building a new research and development facility to independently test large-scale hydrogen fuel cell systems for heavy-duty and off-road applications with funding from the US Department of Energy.

The US Department of Energy (DOE) is hoping Argonne Nat’l Lab’s extensive fuel cell research experience, which dates back to 1996, will give it unique insights as it evaluates new polymer electrolyte membrane (PEM) fuel cell systems ranging from 150 to 600 kilowatts for use in industrial vehicle and stationary power generation applications.

The new Argonne test facility will help prove (or, it should be said, disprove) the validity of hydrogen as a viable fuel for transportation applications including heavy trucks, railroad locomotives, marine vessels, and heavy machines used in the agriculture, construction, and mining industries.

“The facility will serve as a national resource for analysis and testing of heavy-duty fuel cell systems for developers, technology integrators and end-users in heavy-duty transportation applications including [OTR] trucks, railroad locomotives, marine vessels, aircraft and vehicles used in the agriculture, construction and mining industries,” explains Ted Krause, laboratory relationship manager for Argonne’s hydrogen and fuel cell programs. “The testing infrastructure will help advance fuel cell performance and pave the way toward integrating the technology into all of these transportation applications.”

The Hydrogen and Fuel Cell Technologies Office (HFTO) of DOE’s Office of Energy Efficiency and Renewable Energy is dedicating about $4 million to help build the new Argonne facility, which is set to come online next fall.

Electrek’s Take

Medium-sized Hydrogen FC excavator concept; via Komatsu.

It’s going to be hard to convince me that the concentrated push for a technology as inefficient as hydrogen fuel cells has more to do with any real consumer or climate benefit than it does keeping the throngs of people it will take to manufacture, capture, transport, store, house, and effectively dispense hydrogen gainfully employed through the next election cycle.

As such, while case studies like the hydrogen combustion-powered heavy trucks that have been trialed at Anglo American’s Mogalakwena mine since 2021 (at top) and fuel cell-powered concepts like Komatsu’s medium-sized excavator (above) have proven that hydrogen as a fuel can definitely work on a job site level while producing far fewer harmful emissions than diesel, I think swappable batteries like the ones being shown off by Moog Construction and Firstgreen have a far brighter future.

Speaking of Moog, we talked to some of the engineers being their ZQuip modular battery systems on a HEP-isode of The Heavy Equipment Podcast a few months back. I’ve included it, below, in case that’s something you’d like to check out.

SOURCES | IMAGES: ANL, Komatsu, and NPROXX.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Velocity truck rental adds 47 high-speed truck chargers to California dealer network

Published

on

By

Velocity truck rental adds 47 high-speed truck chargers to California dealer network

Velocity truck rental is doing its part to help commercial fleets electrify by energizing 47 high-powered charging stations at four strategic dealer locations across Southern California. And they’re doing it now.

The new Velocity Truck Rental & Leasing (VTRL) charging network isn’t some far-off goal being announced for PR purposes. The company says its new chargers are already in the ground, and set to be fully online and energized by the end of this month at at VTRL facilities in Rancho Dominguez (17), Fontana (14), the City of Industry (14), and San Diego (2).

45 120 kW Detroit e-Fill chargers make up the bulk of VTRL’s infrastructure project, while two DCFC stations from ChargePoint get them to 47. All of the chargers, however, where chosen specifically to cater to the needs of medium and heavy-duty battery electric work trucks.

The company says it chose the Detroit e-Fill commercial-grade chargers because they’ve already proven themselves in Daimler-heavy fleets with their ability to bring Class 8 Freightliner eCascadias, Class 6 and 7 Freightliner eM2 box trucks, and RIZON Class 4 and 5 cabover trucks, “to 80% state of charge in just 90 minutes or less.”

At Velocity, we are not just reacting to the shift towards electric mobility; we are at the forefront with our customers and actively shaping it. By integrating high-powered, commercial-grade charging solutions along key transit corridors, we are ensuring that our customers have the support they need today. This charging infrastructure investment is a testament to our commitment to helping our customers transition smoothly to electromobility solutions and to prepare for compliance with the Advanced Clean Fleets (ACF) regulations.

David Deon, velocity president

Velocity plans to offer flexible charging options to accommodate the needs of different fleets, including both managed, “charging as a service” subscription plans and self-managed/opportunity charging during daily routes. While trucks are charging, drivers and operators will be able to relax in comfortable break rooms equipped with WIFI, television, snacks, water, and restrooms.

Electrek’s Take

Image via DTNA.

While it feels a bit underwhelming to write about trucking companies simply following the letter of the law in California, the rollout of an all-electric, zero-emission commercial trucking fleet remains something that, I think, should be celebrated.

As such, I’m celebrating it. I hope you are, too.

SOURCE | IMAGES: Global Newswire; Daimler Trucks.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending