Connect with us

Published

on

The Lake Muttsee Dam – the longest dam in Switzerland and the highest in Europe at 2,500 meters (8,202 feet) above sea level – now hosts nearly 5,000 solar panels, making it the country’s largest alpine solar system.

The solar project is called AlpinSolar, and it was set up by energy firm Axpo, discount chain Denner, and utility IWB – all Swiss companies. Denner has a set up a long-term power purchase agreement (PPA) for AlpinSolar’s power – it’s the country’s first PPA. Installation was completed in 2022 and energy production has begun.

The 2.2 megawatt solar project is attached to the dam wall of the hydroelectric power plant. AlpinSolar will produce enough electricity to power the equivalent of around 700 households.

The solar array, which is almost 1 kilometer (0.62 miles) wide, will produce 3.3 million kilowatt hours of electricity per year – half of it in winter. That’s because Lake Muttsee, which is in the central Swiss canton of Glarus, isn’t prone to fog since it’s at such high altitude, and the snow reflects the sunlight onto the solar panels.

Jeanette Schranz, communications lead for renewables at Axpo, told Reuters:

One of the qualities of alpine solar plants is that especially in winter they produce up to three times more electricity than a comparable facility in the midlands.

Solar panels like the cold and have a higher yield in cooler temperatures.

In fact, the highest yields from AlpinSolar are expected in February and March, but overall, the solar array’s output is expected to be relatively balanced over the entire year.

The project used 4,872 of Swiss manufacturer Megasol’s bifacial glass-glass solar modules. The modules’ 40-mm frame is designed to be able to handle AlpinSolar’s expected snow load.

Axpo says it aims to install 4,200 solar projects in Switzerland by 2030.

Read more: Check out this massive Swiss ‘water battery’ that can power up to 900k homes

Photos: AlpinSolar


UnderstandSolar is a free service that links you to top-rated solar installers in your region for personalized solar estimates. Tesla now offers price matching, so it’s important to shop for the best quotes. Click here to learn more and get your quotes. — *ad.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Expect Eaton to keep profiting from AI’s spiraling demand for computing power

Published

on

By

A big backlog of projects should keep the company busy for the foreseeable future.

Continue Reading

Environment

CATL launches the ‘world’s first ultra-safe’ EV skateboard chassis

Published

on

By

CATL launches the 'world's first ultra-safe' EV skateboard chassis

China’s CATL launched its new Bedrock Chassis on Monday, calling it “the world’s first ultra-safe skateboard chassis.” The global EV battery leader said its newest tech “activates a trillion yuan market” as the new standard for intelligent vehicle design. According to CATL, it will also end the belief that gas-powered cars are safer than EVs.

CATL launches the world’s first ultra-safe EV chassis

On December 24, CATL officially launched the new Bedrock Chassis with “outstanding” safety performance. The company proved it in a video presented during the launch event.

The video showed a prototype model’s front impact at 120 km/h (about 75 mph) without exploding or catching fire. CATL claims its newest tech “sets a new standard for intelligent chassis safety” with comprehensive protection across all scenarios and speed ranges.

According to CATL, the Bedrock Chassis passed the world’s first “highest speed +strongest impact” dual extreme safety test.

In China, the commonly used speed for frontal impact safety tests in the C-NCAP (China New Car Assessment Program) is 56 km/h (35 mph).

At that speed, the collision generates energy equivalent to falling from a 12-meter-high (39-foot) building. At 120 km/h, it’s like dropping 56 meters (183 feet). According to CATL, the collision energy is 4.6 times greater.

CATL-world's-first-chassis
Ni Jun, Chief Manufacturing Officer of CATL, during the Bedrock Chassis launch event (Source: CATL)

During the launch, Ni Jun, CATL’s chief manufacturing officer, said, “Safety is the core of CATL—it’s part of our DNA.”

A trillion yuan market

There has been no previous instance of a new energy vehicle (NEV) “daring to challenge a 120 km/h frontal pole impact test,” the company said during the event.

With a battery-centered design, CATL’s new Bedrock Chassis directly integrates the battery cells into the unit. The design enables it to absorb 85% of the vehicle’s collision energy compared to about 60% by a traditional chassis.

CATL-world's-first-chassis
CATL launches the world’s first ultra-safe Bedrock Chassis (Source: CATL)

The unit features an “ultra-safe battery cell design,” disconnecting the high-voltage circuit instantly within 0.01 seconds. It will then complete the vehicle’s residual high-voltage energy discharge within 0.2 seconds, a new industry record.

CATL boasted that its new chassis design “paves the way for the industry,” but more importantly, “it also overturns the conventional belief that gasoline vehicles are safer than NEVs.”

CATL-world's-first-chassis
CATL launches Bedrock Chassis, the world’s first ultra-safe skateboard chassis (Source: CATL)

The global EV battery leader claims its new Bedrock Chassis “activates a trillion yuan market” and will accelerate the shift toward modular, personalized, intelligent vehicle design. At the launch event, CATL revealed that AVATR will be the first automaker to use the new tech.

CATL is on a “never-ending journey” to create safer batteries and vehicles to accelerate the industry’s shift to EVs.

The news comes after CATL revealed ambitious plans to expand its EV battery swap network last week with its new “Chocolate” SEB batteries. CATL aims to phase out gas stations over the next few years as it rapidly expands battery swap stations across China.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

BYD’s new EV plant in Brazil suddenly halted over ‘slavery-like’ worker conditions

Published

on

By

BYD's new EV plant in Brazil suddenly halted over 'slavery-like' worker conditions

Construction at BYD’s new EV plant in Brazil was suddenly halted Monday after authorities found Chinese workers in “slavery-like” conditions. The workers were hired in China by another firm, and BYD has since cut ties.

Why construction at BYD’s EV plant in Brazil is halted

According to a statement from the Public Ministry of Labor (MPT), 163 workers at the construction site of BYD’s new EV plant in Salvador, Brazil, were “being held in conditions analogous to slavery.”

Construction on the site was halted on Monday after the findings. According to the authorities, Jinjiang Group, one of the contractors BYD hired to build the new EV plant, hired the workers in China.

BYD released a statement saying it has cut ties with Jinjiang and is assisting the victims as it works with Brazilian authorities. All workers will be transferred to hotels. They will not be able to work and will have their contracts terminated.

Alexandre Baldy, senior vice president of BYD Brazil, said the company remains “committed to full compliance with Brazilian legislation, especially with regard to the protection of workers’ rights and human dignity.”

BYD's-EV-plant-Brazil-halted
BYD Dolphin Mini (Seagull) launch in Brazil (Source: BYD)

The MPT statement detailed the extreme “slavery-like” worker conditions. For example, they had one bathroom for every 31 workers, forcing them to wake up at 4 am to get in line to be ready for work at 5:30 am. They slept without mattresses on the bed, and the kitchens operated in “alarming conditions.”

If a worker quit after six months, they would leave the country without any pay after factoring in the cost of a round-trip airplane ticket.

BYD-Shark-Brazil
BYD Shark PHEV pickup (Source: BYD)

BYD said it has held a “detailed review” over the past few weeks. The Chinese EV giant asked Jinjiang several times to improve the conditions.

A joint virtual hearing of the MPT and MTE is scheduled for December 26. The MPT said the need for new “on-site inspections” has not been ruled out. BYD’s new EV plant is set to begin production next year. Check back soon for more updates on the situation.

BYD is already a top-selling EV brand in Brazil. In October, it launched its first pickup, the Shark PHEV. The pickup is BYD’s sixth vehicle in Brazil, joining other popular models like the Dolphin Mini (Seagull), Yuan Plus, and Dolphin.

Source: Bloomberg, Brazil Public Ministry of Labor

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending