A new report states that Tesla engineers tried to convince Elon Musk not to give up on radar for its Autopilot and self-driving effort.
Tesla has a weird history with radar sensors for its Autopilot and Full Self-Driving vehicle programs.
The automaker decided to remove its front-facing radar and, more recently, the ultrasonic sensors from its sensor suite.
It’s all part of its “Tesla Vision” approach, where the automaker believes that the best way to achieve self-driving capability is through cameras being the only sensors. The logic is that the roads are designed to be operated by humans who operate cars through vision (eyes) and biological neural nets (brain).
Tesla believes that the best way to replicate that is through cameras to replace the eyes and neural nets running on a computer to replace the brain.
The company removed the radars on its vehicles in 2021 and removed the ultrasonic sensors last year.
However, we now learn that not everyone at Tesla was on board with this significant change.
A new report from SF Gate, which claims to have talked to several former Tesla employees, describes an effort to try to convince Musk not to remove the radar:
Some Tesla engineers were aghast, said former employees with knowledge of his reaction, speaking on the condition of anonymity for fear of retribution. They contacted a trusted former executive for advice on how to talk Musk out of it, in previously unreported pushback. Without radar, Teslas would be susceptible to basic perception errors if the cameras were obscured by raindrops or even bright sunlight, problems that could lead to crashes.
The report claimed that Musk overruled a significant number of engineers who tried to warn that removing the radar would be problematic.
The report goes as far as linking the removal of the radar to an uptick in accidents related to Tesla Autopilot:
Musk was unconvinced and overruled his engineers. In May 2021 Tesla announced it was eliminating radar on new cars. Soon after, the company began disabling radar in cars already on the road. The result, according to interviews with nearly a dozen former employees and test drivers, safety officials and other experts, was an uptick in crashes, near misses and other embarrassing mistakes by Tesla vehicles suddenly deprived of a critical sensor.
However, the situation was a little more complicated than that. Electrek spoke to Musk around the time of the removal of the radar, and the CEO was mostly frustrated with the quality of the radars and still believed that higher definition radars would improve Autopilot/Full Self-Driving.
He told Electrek:
A very high resolution radar would be better than pure vision, but such a radar does not exist. I mean vision with high res radar would be better than pure vision.
Sure enough, two years later, Tesla is now including a high-resolution radar in its latest sensor suite for Autopilot and Full Self-Driving.
The report also claimed that Musk had several Tesla Autopilot engineers, even Ashok Elluswamy, the head of Autopilot and self-driving software, work on Twitter.
Electrek’s Take
I am sure that many people at Tesla weren’t happy about removing the radar. It’s not exactly surprising. Honestly, I am more concerned about the claim in the report that Musk had Tesla Autopilot/Self-Driving engineers work on Twitter.
That’s ridiculous.
Tesla is years behind its self-driving promises; all its staff should be solely focused on making right on those promises. Having them work on Twitter is laughing in the face of Tesla customers who paid up to $15,000 for the Full Self-Driving package.
FTC: We use income earning auto affiliate links.More.
Picture taken on September 4, 2023 shows windmills at the Nysted Offshore Wind Farm constructed by Danish windpower giant Orsted in 2002-2003 in the Baltic Sea near Gedser in Denmark.
Thomas Traasdahl | Afp | Getty Images
Norwegian oil giant Equinor on Monday pledged to support Denmark’s Orsted with almost $1 billion of fresh capital, backing the beleaguered company amid sustained attacks on offshore wind projects from the Trump administration.
In an apparent show of confidence in the world’s largest offshore wind developer, Equinor signaled its intention to participate in Orsted’s planned 60 billion Danish krone ($9.4 billion) rights issue and said it intended to hold on to its 10% ownership in the company.
Equinor said its strategic support of the rights issue reflects its confidence in Orsted’s underlying business and the competitiveness of offshore wind in the future energy mix. The state-backed Norwegian energy group is the second largest shareholder in Orsted, behind the Danish government.
As part of the move, Equinor said it would nominate a candidate to Orsted’s board of directors.
Shares of Orsted rose 3.6% on the news, before paring gains. The stock price, which is down nearly 90% from a 2021, peak notched a fresh record low last month after the Trump administration ordered the company to halt work on a near complete windfarm.
Equinor shares were last seen 0.2% higher on Monday morning.
Both companies have been navigating challenges around the offshore wind industry, with Equinor saying it is closely monitoring developments in the U.S., and that it intends to remain in dialogue with Orsted.
The wind industry has been a target for U.S. President Donald Trump since his first day in office. The latest blow came on Friday when the U.S. Department of Transportation canceled $679 millionin federal funding for a dozen infrastructure projects that would support offshore wind power nationwide.
“Wasteful, wind projects are using resources that could otherwise go towards revitalizing America’s maritime industry,” Transportation Secretary Sean Duffy said in a statement.
Analysts at RBC Capital Markets said Equinor’s move to support Orsted could be seen as a first step for the company considering the possibility of a potential merger between the two offshore wind portfolios.
“The challenge with participating fully is that the company will effectively increase its net exposure to two 100%-owned US offshore wind projects, neither of which look likely to be farmed down in the near term, and where political support remains uncertain,” analysts at RBC Capital Markets said in a research note.
“The incremental positive is that alongside its maintained shareholding, Equinor will now be having board representation, making the most of a challenging situation,” they added.
Spokespeople for Equinor and Orsted did not immediately respond to a CNBC request for comment.
— CNBC’s Spencer Kimball & Ganesh Rao contributed to this report.
Japanese equipment giant Komatsu has added a not-so-giant electric excavator to its growing lineup of battery-powered construction equipment. The new Komatsu PC20E-6 electric mini excavator promises a full day of work from a single charge.
Komatsu says the design of its latest mini excavator was informed by data sourced from more than 40,000 working days of comparably-sized diesel excavators. The company found that, in 90% of its global customers’ mini excavator deployments, these vehicles are in active use for less than 3.5 hours per day.
“This defined the target for the required, reliable working time with the excavator,” reads the Komatsu web copy. “This result makes it possible for Komatsu to offer an attractively priced machine with a performance that exactly matches the requirements.”
Keeping costs down are relatively conservative specs. Komatsu chose to power the PC20E-6 with a 23.2 kWh battery pack sending electrons to an 11 kW (~15 hp), high-torque electric motors. Not exactly super impressive on paper, but the machine has an operating weight of 2,190 kg and enough juice for up to four (4) hours of continuous operation.
Advertisement – scroll for more content
More than enough, in other words, to have completed 90% of of those 40,000 work days the company analyzed.
Getting it done
PC20E-6 electric mini excavator; via Komatsu.
If, for some reason, that four hours’ runtime isn’t enough, an on-board charging option for 230V and 3kW charging power compatible with various plug adapters is standard, with an external DC quick charger for 400V and 12 kW charging as optional. In either case, it won’t be long before the machine is back at work.
To help the later adopters sleep well about their battery-powered investments, the PC20E-6 ships with Komatsu’s E-Support maintenance program, which includes free scheduled maintenance by a Komatsu-trained technician, a 3 year/2,000 hour warranty on the machine, plus a 5 year/10,000 hour warranty on the electric driveline. The company says the battery should last 10 years.
“The Komatsu E-Support customer program is included free of charge with every market-ready electric mini excavator and offers exclusive machine support,” said Emanuele Viel, Group Manager Utility at Komatsu Europe. “The bottom line is that the risk for the end customer is significantly reduced, especially when it comes to exploring the electrification advances in the industry.”
Komatsu hasn’t released official pricing quite yet, but has revealed that the P20E-6 will begin series production this October.
If you’re considering going solar, it’s always a good idea to get quotes from a few installers. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them.
Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here.
FTC: We use income earning auto affiliate links.More.
Tesla has unexpectedly terminated a contractor’s contract at Gigafactory Texas, resulting in the layoff of 82 workers who were supporting the automaker’s production at the giant factory in Austin.
MPW Industrial Services Inc., an Ohio-based industrial service provider specializing in cleaning and facility management, has issued a new WARN notice, confirming that it will lay off 82 workers in Texas due to Tesla unexpectedly ending its contract with the company.
Here are the details from the WARN notice:
State / agency: Texas Workforce Commission (TWC).
Notice date: August 27, 2025.
Employees affected: 82
Likely effective date: September 1, 2025
Context from the filing/letter: layoffs tied to an unexpected termination of a major customer contract (Tesla—Gigafactory Texas, 1 Tesla Road); positions include 61 technicians, 7 team leads, 7 supervisors, 7 managers; no bumping rights; workers not union-represented.
In April 2024, Tesla initiated waves of layoffs at the plant, resulting in the dismissal of more than 2,000 employees in Austin, Texas.
Advertisement – scroll for more content
Since then, Tesla’s sales have been in a steady decline. While the automaker is expected to have a strong quarter in the US in Q3 due to the end of the tax credit, sales are expected to decline further in Q4 and the first half of 2026.
Many industry watchers have expected Tesla to initiate further layoffs due to the situation.
Electrek’s Take
We may be seeing the beginnings of a new wave of layoffs at Tesla, as the automaker typically starts with contractors.
To be fair, Tesla could also potentially end the contract unexpectedly for other reasons, but the timing does align with the need to cut costs and staff ahead of an inevitable downturn in US EV sales.
I think it’s inevitable that we start seeing some layoffs. I think Tesla will have to slow down production in the US to avoid creating an oversupply, especially in Q4-Q1.
FTC: We use income earning auto affiliate links.More.