Connect with us

Published

on

Tesla has released a new software update activating its vision-based park assist feature, and videos are starting to roll in showing it in action.

In October of last year, Tesla abruptly decided to stop including ultrasonic sensors on Model 3 and Model Y vehicles. These ultrasonic sensors were used for short-range objects detection, particularly during low-speed maneuvers, like parking, to help drivers know how far they are from objects outside the car.

Tesla said at the time that it planned to move to a fully vision-based parking system, using the myriad cameras around its cars to estimate distances and provide park assist functions, without the added complexity of these additional ultrasonic sensors.

Since then, these vehicles have been delivered without sensors, but with no driver aids to help in parking. For these cars, Park Assist, Autopark, Summon, and Smart Summon would not be available until a software update came along to enable them.

Now, just under six months later, these software efforts have finally borne fruit as Tesla has started rolling out vision-based park assist in its 2023.6.9 update. It should be available on cars now or soon, so check for software updates if you’ve been waiting for this feature.

The update notes state:

Tesla Vision Park Assist provides visual and audio alerts of surrounding objects. This feature uses the occupancy network to predict high-definition outlines of objects 360 degrees around the car.

Note: Tesla Vision Park Assist is for guidance purposes onlv and is not a substitute for an aware driver. Please be attentive and avoid obstacles as required.

The update does not seem to activate Autopark, Summon, or Smart Summon, yet merely brings back the lost functionality showing drivers how far they are from various objects while parking their car.

Videos have started to surface on social media showing drivers testing out the new functions in their garages and driveways, and results so far seem… a little inconsistent.

It seems to work reasonably well in some situations, showing roughly similar graphics as the vehicles with sensors, but with the added benefit of detecting objects all around the vehicle, instead of just in front or behind. One driver found the measurements to be quite accurate in a well-lit and straightforward parking lot:

Though the lines are quite wiggly, significantly more so than they are when using ultrasonics.

In other situations, the system still seems like it needs work. Here, a driver pulls between two cars and toward a trash can, before the system deactivates and states “park assist unavailable” when he gets close enough to actually need it. Then, he gets out to compare the car’s 26-inch approximation with reality, and eyeballing the distance, thinks that it’s closer to “three and a half, four feet”:

And here, another driver tries to use it with a bike rack attached to the rear of his Tesla, and the system continually detects the rack as an obstruction, repeatedly telling him to stop even though there’s plenty of room behind the car:

Electrek’s Take

Well, it’s clear that the system still needs some work. Which, frankly, is not unexpected when it comes to Tesla’s history with similar things.

A couple years ago the company abruptly removed radar from its cars, moving to a fully camera-based system for its driver assist features (which it’s now reversing course on). At the time, this led to temporary limitations for new owners of non-radar cars, who had to wait for software updates to re-add those features.

The same has happened here with ultrasonics, which caught several customers by surprise. Tesla has sold a lot of cars in the last six months, and I know of at least one who hadn’t heard the news of the missing ultrasonic sensors and was quite annoyed to realize he had just bought a vehicle without a relatively standard modern feature that he had expected his brand-new high-tech $53,000 car would have.

Tesla owners have gotten used to similar things happening, and often give the company slack because actions like these are balanced out by the benefit of over-the-air updates, which improve cars and add features over time.

But this is such a basic and expected feature on modern vehicles, and it has been estimated that these sensors cost about $114 per car. That’s a significant cost but certainly not a massive one, but we’re six months in and so far we’ve only seen one of the four missing features reactivated for the cars in question.

Further, the feature just doesn’t look ready for prime time yet. A feature like this doesn’t need to work 50% of the time, or even 99% of the time – it needs to work 100% of the time because any dings or scratches don’t just go away the next time you park, they stay there for good. If drivers are going to rely on it, and use it in place of their eyes, it needs to be reliable. And if drivers aren’t going to use it in place of their eyes – as Tesla currently recommends that they don’t – then why don’t they just use… their eyes? What’s the point of the sensor if it’s just replicating what your eyes see?

One benefit of ultrasonics is to provide additional confirmation of distance through something other than vision. As in the first embedded video above, the driver could already estimate distances with his eyes, but the ultrasonics would give him additional information that he doesn’t have visually. If the car is just estimating visually the same way the driver does that, then it’s not giving any new information.

This doesn’t mean the system can’t improve. Surely it can and it will have access to more advantageous angles than the driver’s eyes do, and be able to look all around the car at once instead of only in one direction at a time (as it already can). And in certain situations, it already seems to do a good job. But for now, the visualization doesn’t seem a lot better than eyeballing, which is disappointing six months after the feature was unceremoniously eliminated. Let’s hope we don’t have to wait another six months for underwhelming results from Autopark, Summon, and Smart Summon.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Europe’s wind power hits 20%, but 3 challenges stall progress

Published

on

By

Europe’s wind power hits 20%, but 3 challenges stall progress

Wind energy powered 20% of all electricity consumed in Europe (19% in the EU) in 2024, and the EU has set a goal to grow this share to 34% by 2030 and more than 50% by 2050.

To stay on track, the EU needs to install 30 GW of new wind farms annually, but it only managed 13 GW in 2024 – 11.4 GW onshore and 1.4 GW offshore. This is what’s holding the EU back from achieving its wind growth goals.

Three big problems holding Europe’s wind power back

Europe’s wind power growth is stalling for three key reasons:

Permitting delays. Many governments haven’t implemented the EU’s new permitting rules, making it harder for projects to move forward.

Grid connection bottlenecks. Over 500 GW(!) of potential wind capacity is stuck in grid connection queues.

Slow electrification. Europe’s economy isn’t electrifying fast enough to drive demand for more renewable energy.

Brussels-based trade association WindEurope CEO Giles Dickson summed it up: “The EU must urgently tackle all three problems. More wind means cheaper power, which means increased competitiveness.”

Permitting: Germany sets the standard

Permitting remains a massive roadblock, despite new EU rules aimed at streamlining the process. In fact, the situation worsened in 2024 in many countries. The bright spot? Germany. By embracing the EU’s permitting rules — with measures like binding deadlines and treating wind energy as a public interest priority — Germany approved a record 15 GW of new onshore wind in 2024. That’s seven times more than five years ago.

If other governments follow Germany’s lead, Europe could unlock the full potential of wind energy and bolster energy security.

Grid connections: a growing crisis

Access to the electricity grid is now the biggest obstacle to deploying wind energy. And it’s not just about long queues — Europe’s grid infrastructure isn’t expanding fast enough to keep up with demand. A glaring example is Germany’s 900-megawatt (MW) Borkum Riffgrund 3 offshore wind farm. The turbines are ready to go, but the grid connection won’t be in place until 2026.

This issue isn’t isolated. Governments need to accelerate grid expansion if they’re serious about meeting renewable energy targets.

Electrification: falling behind

Wind energy’s growth is also tied to how quickly Europe electrifies its economy. Right now, electricity accounts for just 23% of the EU’s total energy consumption. That needs to jump to 61% by 2050 to align with climate goals. However, electrification efforts in key sectors like transportation, heating, and industry are moving too slowly.

European Commission president Ursula von der Leyen has tasked Energy Commissioner Dan Jørgensen with crafting an Electrification Action Plan. That can’t come soon enough.

More wind farms awarded, but challenges persist

On a positive note, governments across Europe awarded a record 37 GW of new wind capacity (29 GW in the EU) in 2024. But without faster permitting, better grid connections, and increased electrification, these awards won’t translate into the clean energy-producing wind farms Europe desperately needs.

Investments and corporate interest

Investments in wind energy totaled €31 billion in 2024, financing 19 GW of new capacity. While onshore wind investments remained strong at €24 billion, offshore wind funding saw a dip. Final investment decisions for offshore projects remain challenging due to slow permitting and grid delays.

Corporate consumers continue to show strong interest in wind energy. Half of all electricity contracted under Power Purchase Agreements (PPAs) in 2024 was wind. Dedicated wind PPAs were 4 GW out of a total of 12 GW of renewable PPAs. 

Read more: Renewables could meet almost half of global electricity demand by 2030 – IEA


If you live in an area that has frequent natural disaster events, and are interested in making your home more resilient to power outages, consider going solar and adding a battery storage system. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. –trusted affiliate link*

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Podcast: New Tesla Model Y unveil, Mazda 6e, Aptera solar car production-intent, more

Published

on

By

Podcast: New Tesla Model Y unveil, Mazda 6e, Aptera solar car production-intent, more

In the Electrek Podcast, we discuss the most popular news in the world of sustainable transport and energy. In this week’s episode, we discuss the official unveiling of the new Tesla Model Y, Mazda 6e, Aptera solar car production-intent, and more.

The show is live every Friday at 4 p.m. ET on Electrek’s YouTube channel.

As a reminder, we’ll have an accompanying post, like this one, on the site with an embedded link to the live stream. Head to the YouTube channel to get your questions and comments in.

After the show ends at around 5 p.m. ET, the video will be archived on YouTube and the audio on all your favorite podcast apps:

We now have a Patreon if you want to help us avoid more ads and invest more in our content. We have some awesome gifts for our Patreons and more coming.

Here are a few of the articles that we will discuss during the podcast:

Here’s the live stream for today’s episode starting at 4:00 p.m. ET (or the video after 5 p.m. ET):

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

BYD’s new Han L EV just leaked in China and it’s a monster

Published

on

By

BYD's new Han L EV just leaked in China and it's a monster

The Chinese EV leader is launching a new flagship electric sedan. BYD’s new Han L EV leaked in China on Friday, revealing a potential Tesla Model S Plaid challenger.

What we know about the BYD Han L EV so far

We knew it was coming soon after BYD teased the Han L on social media a few days ago. Now, we are learning more about what to expect.

BYD’s new electric sedan appeared in China’s latest Ministry of Industry and Information Tech (MIIT) filing, a catalog of new vehicles that will soon be sold.

The filing revealed four versions, including two EV and two PHEV models. The Han L EV will be available in single- and dual-motor configurations. With a peak power of 580 kW (777 hp), the single-motor model packs more power than expected.

BYD’s dual-motor Han L gains an additional 230 kW (308 hp) front-mounted motor. As CnEVPost pointed out, the vehicle’s back has a “2.7S” badge, which suggests a 0 to 100 km/h (0 to 62 mph) sprint time of just 2.7 seconds.

BYD-Han-L-EV
BYD Han L EV (Source: China MIIT)

To put that into perspective, the Tesla Model S Plaid can accelerate from 0 to 100 km in 2.1 seconds. In China, the Model S Plaid starts at RBM 814,900, or over $110,000. Speaking of Tesla, the EV leader just unveiled its highly anticipated Model Y “Juniper” refresh in China on Thursday. It starts at RMB 263,500 ($36,000).

BYD already sells the Han EV in China, starting at around RMB 200,000. However, the single front motor, with a peak power of 180 kW, is much less potent than the “L” model. The Han EV can accelerate from 0 to 100 km/h in 7.9 seconds.

BYD-Han-L-EV
BYD Han L EV (Source: China MIIT)

At 5,050 mm long, 1,960 mm wide, and 1,505 mm tall with a wheelbase of 2,970 mm, BYD’s new Han L is roughly the size of the Model Y (4,970 mm long, 1,964 mm wide, 1,445 mm tall, wheelbase of 2,960 mm).

Other than that it will use a lithium iron phosphate (LFP) pack from BYD’s FinDreams unit, no other battery specs were revealed. Check back soon for the full rundown.

Source: CnEVPost, China MIIT

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending