Polestar opened a new “Polestar Space” in South Coast Plaza in Costa Mesa, CA this week, and we stopped by to have a look at the upcoming Polestar 3 SUV and Polestar Roadster concept, which will become the Polestar 6.
South Coast Plaza is an upscale mall in an upscale area, so it’s not a terrible place to find customers looking for the hot new thing (when one random customer learned the 3 would cost over $80k, he responded “oh, that’s not bad”). Especially with its since it’s in California, which leads the nation in EV sales, and Orange County, which is one of the hottest EV markets in the state.
Both upcoming cars were on site for the Space’s grand opening ceremony on Thursday. Unfortunately we were not able to sit in the Roadster concept, but we got a chance to have a little time inside the Polestar 3.
But the cars are on the move, and only there for a short time – the 3 has already moved along, and the Roadster is only there until the end of Saturday. Since both are prototypes, they’ll be traveling around the country for various appearances. Keep an eye on Polestar’s events page if you want to find a place to check them out.
The Polestar 3 does maintain a similar shape and dimensions to other popular SUVs these days (it’s a few inches longer than the Model Y, but the same width and height). But as is common in electric SUVs, it feels more spacious on the inside than it would seem from the outside.
EVs have simpler packaging constraints than in gas-powered vehicles, because smaller motors take up less space. This can result in more interior space, and the Polestar 3 is certainly roomy on the inside.
At 6 feet tall, I fit with plenty of room in the back seat with the front seat pushed all the way back – and which was occupied at the time by a 6’4 passenger who was also plenty comfortable. Headroom and legroom are extensive throughout the car.
And it feels even more open with the massive glass roof which runs all the way to the back of the car with no crossbar.
The ventilated leather seats were comfortable and slick, but we only had a few minutes in a stationary car. The car will have a massage function, but we didn’t get to activate it yet. Interior options include leather (sourced in Scotland with animal welfare standards in mind, and by-products of the meat industry… an industry which is not sustainable), vinyl/polyester synthetic vegan interior, and, in a relatively new turn for the auto industry: wool. The wool sounds pretty cool, to me.
The interface is similar to that of the Polestar 2. While we didn’t do anything complex or dig very deep into it, it felt snappy in response to touch inputs. While many drivers consider touch inputs inferior to physical controls, one important part about touchscreens is that they at least respond without lag, and in our limited testing tapping around through the menus, the Polestar 3’s Google-powered interface felt good enough in that respect. Once again, the only companies getting touch interfaces right are EV startups, while the rest of the industry is outsourcing all of their infotainment to the owners’ phones.
We got a look under the hood as well, at the frunk space. It wasn’t particularly large – larger than the frunks in Kia/Hyundai/Genesis EV SUVs, but smaller than that in the Tesla Model Y. It would probably be a good place to store spare charging cables or other tools that stay in the car long-term, though there will also be rear under-floor storage in the trunk which would be useful for the same. We didn’t get to see the underfloor trunk storage on the prototype.
Both the front and rear of the car have small “wing”-like design features intended to maintain the profile of the car while increasing aerodynamic efficiency – similar to the R-Wing at the front of the Dodge Banshee concept.
These wings change the angle at which the car cuts through the air, reduce the total flat space at the front and rear of the vehicle, and channel air more smoothly along the top surfaces of the car (called “attached flow”). This all makes the car more aerodynamic by reducing the amount of disturbed air flowing off of the vehicle, while also adding some downforce by channeling air downward at the rear.
The Polestar Roadster concept is another thing entirely. While the 3 is coming out at the end of this year, the Roadster is still a concept, though slated to go into production as the Polestar 6. So things will likely change before it hits the road.
Since it’s so far out, it was a look-only, no-touch affair. So we’ll keep this part a bit shorter.
Polestar was showing the convertible in topless mode. The final vehicle will have a retractible convertible top. Retractible tops can add weight and complexity and reduce chassis rigidity, but Polestar says that its bonded aluminum chassis increases rigidity so much that this shouldn’t be an issue.
It recently opened an office in Coventry, UK, right in the middle of England’s “Motorsport Valley” where several Formula 1 teams are headquartered, to help develop the various performance aspects of the 6. Polestar says the 6 will have 884hp and 0-60 in about 3 seconds, and is going after Porsche in driving dynamics.
Polestar wants the 6 to emphasize its motorsport heritage, and to bring some performance DNA to the brand. It’s also one of the first cars the company will build on its own platform – the Polestar 2 and 3 are on platforms shared with Volvo, the 4 will be on a platform shared with Geely, and the 5 and 6 will finally branch out to Polestar’s own. This is where the aforementioned bonded aluminum chassis comes into play.
The Polestar 3 starts shipping in the US at the end of this year with a starting price of $84k, and the US-built version with optional LiDAR will hit the road in the middle of 2024. The Polestar 6 is slated for 2026 deliveries and we don’t yet have a price for the standard model, though an “LA Concept” special edition sold out the first 500 launch models in a week, with a $25k deposit and an expected price of $200k. So you can probably expect the base model’s price to have 6 numbers in it, rather than 5.
FTC: We use income earning auto affiliate links.More.
In the Electrek Podcast, we discuss the most popular news in the world of sustainable transport and energy. In this week’s episode, we discuss Trump’s Big Beautiful bill becoming law and going after EVs and solar, Tesla, Ford, and GM EV sales, Electrek Formula Sun, and more
Today’s episode is brought to you by Bosch Mobility Aftermarket—A global leader and trusted provider of automotive aftermarket parts. To celebrate Amazon Prime Day July 8th through 11th, Bosch Mobility is offering exclusive savings on must-have auto parts and tools. Learn more here.
As a reminder, we’ll have an accompanying post, like this one, on the site with an embedded link to the live stream. Head to the YouTube channel to get your questions and comments in.
Advertisement – scroll for more content
After the show ends at around 5 p.m. ET, the video will be archived on YouTube and the audio on all your favorite podcast apps:
We now have a Patreon if you want to help us avoid more ads and invest more in our content. We have some awesome gifts for our Patreons and more coming.
Here are a few of the articles that we will discuss during the podcast:
A new Tesla prototype was spotted again, reigniting speculation among Tesla shareholders, even though it’s likely just a Model Y, potentially a bit smaller, and the upcoming stripped-down, cheaper version.
It sparked a lot of speculation about it being the new “affordable” compact Tesla vehicle.
There’s confusion in the Tesla community around Tesla’s upcoming “affordable” vehicles because CEO Elon Musk falsely denied a report last year about Tesla’s “$25,000” EV model being canceled.
Advertisement – scroll for more content
The facts are that Musk canceled two cheaper vehicles that Tesla was working on, commonly referred as “the $25,000 Tesla” in early 2024. Those vehicles were codenamed NV91 and NV92, and they were based on the new vehicle platform that Tesla is now reserving for the Cybercab.
Instead, Musk noticed that Tesla’s Model 3 and Model Y production lines were starting to be underutilized as the Company faced demand issues. Therefore, Tesla canceled the vehicles program based on the new platform and decided to build new vehicles on Model 3/Y platform using the same production lines.
We previously reported that these electric vehicles will likely look very similar to Model 3 and Model Y.
In recent months, several other media reports reinforced this, and Tesla all but confirmed it during its latest earnings call, when it stated that it is “limited in how different vehicles can be when built on the same production lines.”
Now, the same Tesla prototype has been spotted over the last few days, and it sent the Tesla shareholders community into a frenzy of speculations:
Electrek’s Take
As we have repeatedly reported over the last year, the new “affordable” Tesla “models” coming are basically only stripped-down Model 3 and Model Y vehicles.
They might end up being a little smaller by a few inches, and Tesla may use different model names, but they will be extremely similar.
If this is it, which is possible, you can see it looks almost exactly like a Model Y.
It’s hard to confirm if it’s indeed smaller because of the angle of the vehicle compared to the other Model Ys, but it’s not impossible that the wheelbase is a bit smaller – although it’s hard to confirm.
Either way, the most significant changes for these stripped-down, more affordable “models” are expected to be cheaper interior materials, like textile seats instead of vegan leather, no heated or ventilated seats standard, no rear screen, maybe even no double-panned acoustic glass and a lesser audio system.
As previously stated, the real goal of these new variants, or models, is to lower the average sale price in order to combat decreasing demand and maintain or increase the utilization rate of Tesla’s current production lines, which have been throttled down in the last few years to now about 60% utilization.
If this trend continues, Tesla would find itself in trouble and may even have to close its factories.
FTC: We use income earning auto affiliate links.More.
CANNES — Wall Street’s new plumbing is being built on Ethereum and this week its architects took over the same French Riviera villas and red carpet venues that host the Cannes Film Festival in May.
The Ethereum Community Conference, or EthCC, took over the beachside town that was swarming with crypto founders, developers, and some of the institutional giants now building atop the infrastructure.
The crypto elite climbed the iconic red-carpeted steps of the Palais des Festivals — a cinematic landmark now repurposed as the stage for Ethereum’s flagship European event.
“The atmosphere this year was palpable in Cannes,” said Bettina Boon Falleur, the powerhouse behind EthCC for the past seven years. “The prestige of the location, combined with the quality of talks, has reinforced Ethereum’s stature and purpose in the wider ecosystem.”
Private parties sprawled across cliffside estates and exclusive resorts, but the conversations were less about price action and more about the blockchain’s evolving role as the back-end of global finance.
EthCC, now in its eighth year, has tracked Ethereum’s trajectory from scrappy experiment to institutional backbone.
“That impact was unmistakable this year,” Falleur said. “From Robinhood embracing decentralized finance infrastructure via Arbitrum to local governments like the City of Cannes exploring deeper integration with the crypto economy.”
Indeed, one of the boldest moves came this week from Robinhood, which became the first publicly traded U.S. company to launch tokenized stocks on-chain.
At a product showcase held inside a Belle Époque mansion overlooking the sea, Robinhood unveiled a sweeping new crypto strategy — including the ability for European users to trade tokenized U.S. stocks and ETFs via Arbitrum, a Layer 2 network built on Ethereum.
The announcement helped push Robinhood stock past $100 for the first time, capping off a week of fresh all-time highs and a more than 30% rally since being snubbed by the S&P 500 during a recent rebalance.
Inside the Palais des Festivals, ETHCC draws founders, developers, and institutions into the same halls that host the world’s biggest film premieres — this time, for the future of finance.
MacKenzie Sigalos
Ether, the token native to the Ethereum blockchain, was up nearly 6% on the week and several public equities tied to the blockchain have rallied alongside it.
BitMine Immersion Technologies, a company that mines bitcoin, gained more than 1,200% since announcing it would make ether its primary treasury reserve asset. Bit Digital, which recently exited bitcoin mining to “become a pure play” ethereum staking and treasury company, gained more than 34% this week. And SharpLink Gaming, which added more than $20 million in ether to its balance sheet this week, jumped more than 28% on Thursday.
Ether ETF inflows are rising again too — a sign that institutional investors are warming back up.
Ether is still down more than 20% this year and lags far behind bitcoin in market cap and adoption. But funds tracking ETH have seen two straight months of mostly net inflows, according to CoinGlass data. Still, ether ETFs total just $11 billion — compared to $138 billion in bitcoin ETFs.
Institutions aren’t betting on Ethereum for hype — they’re betting on infrastructure.
Even as prices stall and the network faces headwinds from slower base layer revenues and faster rivals like Solana, the momentum is shifting toward utility.
“Ethereum is getting plugged into these core transactional systems,” Paul Brody, global blockchain leader at EY, told CNBC on the sidelines of EthCC. “Investors, savers, people moving money — they are going to start shifting from some of the older mechanisms of doing this into Ethereum ecosystems that can do these transactions faster, cheaper, but also very importantly, with significant new functionality attached to it.”
Crypto founders and developers climb the iconic red-carpeted steps of the Palais des Festivals — a familiar backdrop for the Cannes Film Festival, now repurposed for Ethereum’s flagship European event.
MacKenzie Sigalos
Deutsche Bank recently announced it’s building a tokenization platform on zkSync — a faster, cheaper blockchain built on top of Ethereum — to help asset managers issue and manage tokenized funds, stablecoins, and other real-world assets while meeting regulatory and data protection requirements.
Coinbase and Kraken are also racing to own the crossover between traditional stocks and crypto.
Coinbase has filed with the SEC to offer trading in tokenized public equities, a move that would diversify its revenue stream and bring it into more direct competition with brokerages like Robinhood and eToro.
Kraken announced plans to offer 24/7 trading of U.S. stock tokens in select overseas markets.
BlackRock‘s tokenized money market fund, BUIDL — launched on Ethereum last year — offers qualified investors on-chain access to yield with redemptions settled in USDC in real time.
Stablecoins, meanwhile, continue to serve as the backbone of Ethereum’s financial layer.
“The builders and contributors at EthCC aren’t chasing the next bull run,” Falleur said, “they’re laying the groundwork to make Ethereum home for the next billion users.”
Even as newer blockchains tout faster speeds and lower fees, Ethereum is proving its staying power as a trusted network.
Vitalik Buterin, Ethereum’s co-founder, told CNBC in Cannes that there is an assumption that institutions only care about scale and speed — but in practice, it’s the opposite.
Ethereum co-founder Vitalik Buterin delivers a keynote at ETHCC, laying out the network’s next steps — and its values test — as institutional adoption accelerates.
EthCC
“A lot of institutions basically tell us to our faces that they value Ethereum because it’s stable and dependable, because it doesn’t go down,” he said.
Buterin added that firms often ask about privacy and other long-term features — the kinds of concerns that institutions, he said, “really value.”
Tomasz Stańczak, the new co-executive director of the Ethereum Foundation, said institutions are choosing Ethereum for the same core reasons.
“Ten years without stopping for a moment. Ten years of upgrades, with a huge dedication to security and censorship resistance,” he said.
He added that when institutions send orders to the market, they want to be “absolutely sure that their order is treated fairly, that nobody has preference, that the transaction actually is executed at the time when it’s delivered.”
Those guarantees have become increasingly valuable as stablecoins and tokenized assets move into the mainstream.
Ethereum’s core values — neutrality, security, and censorship resistance — are emerging as competitive advantages.
The real test now is whether Ethereum can scale without losing its values.
“We don’t just want to succeed,” Buterin said from the mainstage of the Palais this week. “We want to be something that is worthy of succeeding.”
He said the hope is that future generations will look back and see a network that truly delivered openness, freedom, and permissionless access to the masses.
White-clad guests dance poolside at the rAAVE party in Cannes.
MacKenzie Sigalos
But the week didn’t end in the conference halls, it closed with tradition. On the balcony of Villa Montana, overlooking the Bay of Cannes, the rAAVE party lit up.
White-clad guests sipped cocktails as the DJ spun by the pool, haze curling from smoke machines.
This year, Chainlink co-founder Sergey Nazarov and DeFi icon Stani Kulechov, founder of Aave, stood atop the balcony overlooking the crowd and the light-dotted skyline of Cannes.
It was a fitting snapshot of the momentum behind Ethereum’s institutional rise and symbolic of Web3’s shift from niche experiment to financial mainstay.