Connect with us

Published

on

Autel, a Chinese company long known for making solid automotive supplies and diagnostic tools (and drones) recently jumped into the residential EV charger market with its MaxiCharger ($459). As an auto company with technology in its DNA, we hoped to see some innovation. And we did – but not where we expected.

Like most EV chargers, Autel’s MaxiCharger comes in a big heavy cardboard box. Autel’s internal packaging is sadly not biodegradable but uses reusable velcro straps holding the wiring in place. It comes fully assembled, so you don’t have to connect cables or screws like with other EV chargers.

Installing Autel MaxiCharger

Installing the MaxiCharger is incredibly straightforward. You simply put the metal plate on the wall where you want the charger, drill two holes and put in some screws. Obviously, you’ll want to find the wood studs behind drywall or use a masonry bit if drilling into cinderblocks/bricks or similar. Once the plate is on the wall, you simply hang the charging unit on the plate, and it locks in pretty solidly. The flipside to the easy install is that it is also relatively easy to steal if located outside.

Note, the NEMA 14-50/ 6-50 cable is (too damn) short at just over one-foot long, and it’s also stiff, so make sure it has room to make it to the plug. Also, the charger plug is oriented so that the charger is above the plug, or you can very tightly curve the cable and locate the box directly to the right of the plug. A longer, more flexible plug cable would provide more mounting options here. I think the Enel Juicebox does this a little better.

Once installed, plug in and download the Android or iOS app. It will ask for your email and phone number and then a QR code and pin, which is in the paper manual on a sticker. That last bit is more of a scavenger hunt than I’d like, but it worked the first time. (Note: The charger will work without the app being set up, so if you are just looking for a dumb charger, it is plug-and-play.)

The app is pretty solid and gives a good readout of charging sessions as well as the ability to stop and start charges. It also allows Siri and Alexa to initiate and stop charging. One really neat app tab allows you to suggest a new feature and vote on others. You can vote on each feature, and the engineers give a status on these plans. Everyone should do this!

Using the Autel MaxiCharge

I live in ConEdison-land, where I can get a $.10/kWh rebate on my charging so long as I only charge between midnight and 8 a.m. I have this set up on both my Tesla and my Chevy Bolt, but I could also easily set this up on the Autel MaxiCharger.

After that, the charger is literally plug-and-play. The long 25-foot cable is nice but not terribly flexible, which is made even more rigid by the cold. In my New York April testing, which saw a few nights drop into freezing, it never was more than a little annoyance, however.

I consistently saw a 40A draw and never had any dropouts. The charger head feels very high quality and is easy to insert and remove. This feels like it will easily outlast its three-year warranty.

I didn’t have an opportunity to try the RFID charging or try connecting via Bluetooth, but I imagine these will be super important for some users who live in multifamily-charging scenarios or places without Wi-Fi.

Autel Notes that these chargers are incredibly durable with NEMA 4 protection, allowing them to be installed inside the garage or out.

The Nema 14-50 plug cable can be swapped out for a hardwired connection, which will allow this same charger to hit 50A, or almost 12kW, of charging.

In addition, Autel has a MaxiCharger DC V2X product coming out soon, which promises faster DC fast charging and bidirectional power flow, which is something we’ve been waiting for desperately.

Things I love about the Autel MaxiCharger:

  • $459 price is reasonable for a high-quality product and significantly lower than the big players like Juicebox and ChargePoint. The most important thing here might be that Autel is pushing prices down for high-quality EV chargers.
  • App has solid features and the ability to do RFID charging, which will be big for multifamily dwellings.
  • Metal J1772 plug is super durable (but the plastic button could be prone to breaking).
  • Box is attractive, and plug option on charger and off is nice.
  • Cable is 25 feet long.
  • Three-year warranty and phone tech support and ability to repair parts is a bonus.

Things that could be improved:

  • Stiff cabling is comically inflexible in the cold, and even the Nema 14-50 cable is overly stiff on install. That could make every charge, particularly in the winter, a little harder than it needs to be.
  • Display screen could use better UX, and ring around charger could be lighted (but it is reflective, which will help in low light).

Overall, I can certainly recommend Autel’s $459 MaxiCharger for those looking to install a good-looking, high-quality, reasonably-priced charger with great features for installation inside a garage or outside.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Opinion: it’s time to start recommending some Tesla alternatives

Published

on

By

Opinion: it's time to start recommending some Tesla alternatives

For years, Tesla has been the go-to EV recommendation for “normals” looking for a painless, low-effort experience from their first electric cars. In light of questionable recalls and its CEO’s recent involvement in controversial politics, however, people are starting to distance themselves from the trailblazing company.

All that begs the question: what should we recommend to EV noobs now?

Despite early quality issues and ongoing service headaches, the groundbreaking S3XY lineup of EVs have always had a secret weapon in the form of the Tesla Supercharger network.

That network of dependable high-speed chargers, paired with solid app integration that makes it easy for Tesla drivers to find available chargers just about anywhere in the US, gave the brand a leg up – but no more. By opening up the Supercharger network to brands like Ford, Hyundai, Kia, and others, Tesla has given away its biggest competitive advantage.

Advertisement – scroll for more content

Add in charging and route-planning apps like Chargeway, that make navigating the transition from CCS to NACS easier than ever with its intuitive colors and numbers and easy on/off switch for vehicles equipped with NACS adapters, and it feels like the time is right to start suggesting alternatives to the old EV industry stalwarts. As such, that’s exactly what I’m going to do.

Here, then, are my picks for the best Tesla S3XY (and Cybertruck) alternatives you can buy.

Less Model S, more Lucid Air


Lucid-$20K-EV
Lucid Air sedans; via Lucid.

Developed by OG Tesla Model S engineers with tunes from Annie Get Your Gun playing continuously in their heads, the Lucid Air promises to be the car Tesla should and could have built, if only Elon had listened to the engineers.

With panel fit, material finish, and overall build quality that’s at least as good as anything else in the automotive space, the Lucid Air is a compelling alternative to the Model S at every price level – and I, for one, would take a “too f@#king fast” Lucid Air Sapphire over an “as seen on TV” Model S Plaid any day of the week. And, with Supercharger access reportedly coming later this quarter, Air buyers will have every advantage the Supercharger Network can provide.

HONORABLE MENTIONS

Less Model 3, more Hyundai IONIQ 6


Hyundai-free-charger-EVs-IONIQ-6
2025 Hyundai IONIQ 6 Limited; via Hyundai.

Hyundai has been absolutely killing it these days, with EVs driving record sales and new models earning rave reviews from the automotive press. Even in that company the IONIQ 6 stands out, with up to 338 miles of EPA-rated range and lickety-quick 350 kW charging available to make road tripping easy – especially now that the aerodynamically efficient IONIQ 6 has Supercharger access through a NACS adapter (the 2026 “facelift” models get a NACS port as standard).

The company’s sole electric sedan hasn’t seen the same sales success as IONIQ 5, of course – but that has more to do with America’s insatiable lust for crossovers and SUVs than any shortcoming inherent in the IONIQ 6 itself. All the same, Hyundai is helping dealers clear out its remaining 2024 and ’25 models with 0% financing for up to 48 months through June 2nd.

HONORABLE MENTIONS

Less Model X, more Volvo EX90


2025 Volvo EX90; via Volvo Cars.

Once upon a time, Mrs. Jo Borrás and I were shopping three-row SUVs and found ourselves genuinely drawn to the then-new Model X. Back then it was the only three-row EV on the market, but it wasn’t Elon’s antics or access to charging, or even the Model X’s premium pricing that squirreled the deal. It was the stupid doors.

We went with the similarly new Volvo XC90 T8 in denim blue, and followed up the big PHEV with a second, three years later, in Osmium Gray. When it’s time to replace this one, you can just about bet your house that the new 510 hp EX90 with 310 miles of all-electric range will be near the top of the shopping list.

HONORABLE MENTIONS

Less Model Y, more Kia EV6


Kia-EV6-GT-lease
2024 Kia EV6 GT; via Kia.

If half the fun of driving a Model Y is terrifying your passengers with its straight-line speed, then the Kia EV6 has to be a serious contender for a replacement.

The sporty EV6 GT made its global debut by drag racing some of the fastest ICE-powered cars of the day, including a Lamborghini, Mercedes-AMG GT, a Porsche, even a turbocharged Ferrari – and it beat the pants off ’em. Combine supercar-baiting speed with an accessible price tag, NACS accessibility, $10,000 in customer cash on remaining 2024 models ($3,000 on 2025s) and just a hint of Lancia Stratos in the styling, the EV6 is tough to beat.

HONORABLE MENTIONS

Less Cybertruck, more therapy

Image created by Chat GPT.

It’s not bulletproof, it’s not easy to upfit, it shouldn’t be used for towing, and it won’t win in a straight fight against a vinyl picket fence. By just about every standard “truck” metric, the Tesla Cybertruck falls short against the competition from Chevrolet, Ford, and Rivian. On a more subjective front, the Cybertruck has become a symbol for a conservative movement that is (depending on your point of view) either making America great again or plunging a once-great democracy into an era of fascist oligarchy and widespread stupidity.

In short, it’s probably best to skip the CT.

If you disagree with that statement and feel like driving a new Tesla Cybertruck is the key to happiness, I’m not sure an equally ostentatious GMC Hummer EV or more subtle Rivian R1T will help you scratch that particular itch – but maybe therapy might!

HONORABLE MENTIONS

Original content from Electrek.


Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. The best part? No one will call you until after you’ve elected to move forward. Get started, hassle-free, by clicking here.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Republicans won’t defeat EVs – but in fighting them, may kill US auto industry

Published

on

By

Republicans won't defeat EVs - but in fighting them, may kill US auto industry

Republicans launched multiple attacks against EVs, clean air and American jobs this week, at the behest of the oil industry that funds them. These attacks won’t be successful, and EVs will continue to grow regardless, and inevitably take over for outdated gasoline vehicles.

However, these republican attacks on EVs will still have some effect: they will diminish the US auto industry globally, leading to job losses and surrendering one of the jewels in the crown of American industry to China, where there is no similar effort to destroy its own domestic EV industry.

Republican attacks on clean air this week included moves to block funding that has led to a renaissance in US manufacturing and also to illegally block clean air laws. They also moved forward with a procedural step towards increasing US fuel costs by $23B, an effort which the former reality TV contestant posing as the head of the DOT announced in January.

These moves shouldn’t be a big surprise – republicans have opposed clean air and American jobs for many years now, and they’re doing it because they want to maintain the bribes they get from the oil industry.

Advertisement – scroll for more content

But they should inspire worry for Americans, because they will only harm the country’s domestic manufacturing base in the face of a changing auto industry.

Republicans keep trying to kill clean cars

The last time a republican occupied the the White House, we saw similar efforts to try to raise fuel and health costs for Americans, and to block superior EV technology from flourishing. That didn’t work in the end, and EVs continued to grow both during that period and after.

All the while, fossil fuels have maintained their privileged policy position, being allowed to pollute with impunity and costing the US $760 billion per year in externalized costs. Much of that subsidy is accounted for in the cost of pollution from gas cars, which are one of the primary uses of fossil fuels, which means that, in fact, gasoline vehicles receive much more subsidy than EVs do.

And yet, EVs still managed to grow substantially, despite these headwinds. EV sales have continued to grow, both in the US and globally, even as headlines incorrectly say otherwise. The republican party’s attempts to kill them were futile, and will continue to be.

It didn’t work, but it did delay progress

However, anti-EV actions from Mr. Trump and the republican party did manage to delay progress from where it could have been if America actually instituted smart industrial policy earlier.

What if, instead of the bumbling, idiotic nonsense we went through the last time Mr. Trump squatted in the White House, we could have had something more like President Biden’s EV policy, which created hundreds of thousands of jobs and attracted hundreds of billions of dollars of manufacturing investment?

Surely the American auto industry would be ahead of where it is now if those investments had had time to come online. But instead, republicans are currently trying to kill those jobs, which has already led to several manufacturing projects being cancelled this year, depriving Americans of the economic boost they need right now.

Meanwhile, there’s one place that this sort of stumbling isn’t happening: China.

China is taking advantage

China has spent more than a decade focusing on securing material supply, building refining capacity, developing their own battery technology, and encouraging local EV manufacturing startups.

This has paid off recently, as Chinese EVs have been rapidly scaling in production in recent years. It took a lot of the auto industry by surprise how rapidly Chinese companies have scaled, and how rapidly Chinese consumers have adopted them, after having an initially slow start.

But that adoption hasn’t just been local, it’s also global. Last year, China became the largest auto exporter in the world, taking a crown that Japan had held for decades. But the change was even more dramatic than that – as recently as 2020, China was the sixth-largest auto exporter in the world, just behind the US in 5th place.

China’s dramatic turn upward started in 2020, and now it’s in first place. Meanwhile, because of all the faffing about, the US remains exactly where it was in 2020 – still in fifth place. Well, sixth now, since China eclipsed us (and everyone else).

Tariffs won’t fix it

The reaction of the rest of the world’s automaking countries has been to put tariffs on Chinese autos, hoping to forestall the country’s dramatic rise to dominance. (Although, due to Mr. Trump’s idiotic flailing, Europe is already talking about removing these trade barriers with China)

But tariffs have been tried before, and they didn’t work. When Japan had a similarly meteoric rise to global prominence as an auto manufacturer in the 1970s and 80s, largely due to their adoption of new technology, processes, and different car styles which incumbents were ignoring, the US tried to stop it with tariffs.

All this did was make US manufacturers complacent, and Japan still managed to seize and maintain the crown of top auto exporter (occasionally trading places with Germany) from then until now.

Then as now, the true way to compete is to adapt to the changing automotive industry and take EVs seriously, rather than giving the auto industry excuses to be complacent. But instead, republicans aren’t doing that, and in fact are working to ensure the American auto industry doesn’t adapt, by actively killing the incentives that were leading to a boom in domestic manufacturing investment.

US auto industry jeopardized by republicans

Make no mistake about it: destroying EV incentives, and allowing companies to pollute more and innovate less, will not help the US auto industry catch up with a fast moving competitor.

As we at Electrek have said for years, you cannot catch up to a competitor that is both ahead of you and moving faster than you.

This applies to individual companies, which took their sweet time responding to the challenge from electric upstarts like Tesla, and have now lost market share to said upstarts and let a competitor establish itself in a big way (even though Tesla’s CEO is now trying desperately to harm his own company specifically, and the US EV industry as a whole, by being the largest funder of the party working to destroy said industry).

It also applies to nations, which could have spent the last decade doing what the Chinese auto industry has been doing, but instead non-Chinese automakers have been begging their governments for more time, even though it’s not the regulations that threaten them, it’s competition from a new and motivated rival that is moving faster and in a more determined manner towards the future.

The way that we get around this should be clear: take EVs seriously.

But that’s not what republicans are doing, and in doing so, they are signing the death warrant for an important US industry in the long term.


Another thing republicans are trying to kill is the the rooftop solar credit, which means you could have only until the end of this year to install rooftop solar on your home before the cost of doing so goes up by an average of ~$10,000. So if you want to go solar, get started now, because these things take time and the system needs to be active before you file for the credit.

To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. It has hundreds of pre-vetted solar installers competing for your business, ensuring you get high-quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use, and you won’t get sales calls until you select an installer and share your phone number with them.

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. Get started here. – ad*

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Heavy equipment space race heats up with new Vermeer lunar excavator

Published

on

By

Heavy equipment space race heats up with new Vermeer lunar excavator

International equipment manufacturer Vermeer has unveiled a full-scale prototype of its Interlune excavator, a machine designed to ingest 100 metric tons of rocks and dirt per hour, extracting valuable helium as it makes its way across the surface … of the Moon.

Helium plays a critical role in the manufacturing of semiconductors, chips, optics, and all the other stuff that makes EVs, autonomy, the Internet, and the rest of twenty-first century life possible. The problem is that, despite being the second-most common element in the universe, helium is pretty rare on Earthand we are rapidly running out. As such, there are intense economic and political pressures to find new and reliable sources of helium somewhere, anywhere else, and that demand has sparked a new modern space race focused on harvesting helium on the Moon and getting it back home.

To that end, companies like American lunar mining startup Interlune and the Iowa-based equipment experts at Vermeer are partnering on the development of suite of interplanetary equipment assets capable of digging up lunar materials like rocks and sand from up to three meters below the surface, extract helium-3 (a light, stable isotope of helium believed to exist in abundance on the Moon), then package it, contain it, and ship it back to Earth.

“When you’re operating equipment on the Moon, reliability and performance standards are at a new level,” says Rob Meyerson, Interlune CEO. “Vermeer has a legacy of innovation and excellence that started more than 75 years ago, which makes them the ideal partner for Interlune.”

Advertisement – scroll for more content

Enter: Japan


Komatsu lunar excavator; photo by the author.

America isn’t the only spacefaring nation eyeing a helium mine on the Moon. Japan announced similar plans back in 2023, with Japanese construction giant Komatsu announcing plans to develop a fully electric excavator capable of operating on the lunar surface.

The company showed a scaled prototype of the machine at the 2025 Consumer Electronics Show (CES) in Las Vegas (above), emphasizing the need to develop new ways to operate equipment assets in the extreme temperatures of extraplanetary environments beyond diesel or even hydrogen combustion.

On the airless surface of the moon, it would be impossible for an internal combustion engine to operate on the moon’s surface because there is no oxygen for combustion. Electrically powered machines seem the obvious solution with solar power generation supplying the electricity. But the answer is not that simple.

Temperature changes on the surface of the moon are extreme. They can soar to 110° C and plummet to -170° C. Developing electric construction machinery to perform in this environment is no easy task, but Komatsu is tackling issues one by one as they appear. Using thermal control and other electrification technologies, we are engineering solutions.

KOMATSU

Despite Komatsu’s apparent head start, however, Vermeer seem to pulled ahead – not just in terms of machine development, but in terms of extraction potential as well.

“The high-rate excavation needed to harvest helium-3 from the Moon in large quantities has never been attempted before, let alone with high efficiency,” said Gary Lai, Interlune co-founder and CTO. “Vermeer’s response to such an ambitious assignment was to move fast. We’ve been very pleased with the results of the test program to date and look forward to the next phase of development.”

Interlune is funded by grants from the US Department of Energy and NASA TechFlights. In 2023, the company received a National Science Foundation (NSF) Small Business Innovation Research award to develop the technology to size and sort lunar regolith (read: dirt). Interlune has raised $18 million in funding so far, and is planning its first mission to the Moon before 2030.

Electrek’s Take


Interlune helium harvester concept; via Interlune.

We’ve got space travel, weird mineral extraction from another planet that’s essential for our technology, and a rapid, unchecked proliferation of AI. All we need now is big worms, a whole bunch of hallucinogenic narcotics, and the will to smash up a bunch of data centers with baseball bats – then we’ll have a pretty decent Dune LARP going. Yee-ha!

SOURCE | IMAGES: Interlune.


Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisors to help you every step of the way. The best part? No one will call you until after you’ve elected to move forward. Get started, hassle-free, by clicking here.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending