Connect with us

Published

on

It’s a tale as old as time. Man sees electric bike advertisement touting 50-mile range. Man buys e-bike. Man’s first ride gets 25 miles before the battery’s charge dwindles. Man is justifiably disappointed.

So what gives? Why does it seem like you can never trust the range numbers that the electric bike makers tell us?

The short answer is that it seems that way because that’s the way it is. You simply can’t trust the range figure printed on an electric bicycle’s marketing material. At least not most of the time.

There are several good reasons for this, so let’s break them down.

No standard for range testing for e-bikes

First of all, e-bikes aren’t like cars. There aren’t any standards for battery range testing on e-bikes. It’s not like the “EPA-rated 32 mpg” or “NEDC-tested 250 miles of range” you’ll see in car ads.

Range ratings for e-bikes aren’t determined by outside agencies. They are determined by the bike makers themselves. In the best case, the printed distance figures come from real-world range testing. Some companies like Aventon and Lectric eBikes have stepped up with real-world range data on their sites for each level of pedal assist or throttle riding. That’s the best case. But in the worst case, some companies just give us numbers that they pull out of a hat or theorize that their bike can probably achieve.

Which companies are which? Without hard data displayed on the company’s site, it’s hard to know. That’s the problem. Unless a company puts real-world testing data out there, we’re left to guess.

lerctric ebikes xpedition dual battery

Range varies WIDELY based on a number of factors

This is actually the single largest reason that you almost never actually achieve the range quoted by the e-bike manufacturer. There is a huge variance in the real world battery range of an e-bike on a single charge. There are literally dozens of factors that have significant impacts on range.

Even if an e-bike company wanted to give one number as the ultimate, end all and be all, certified range of their e-bike – a number that they are confident you can achieve – they simply wouldn’t be able to do it. It just depends on too many factors.

radRunner passengers
Carrying a passenger (or two)? That’ll ding your range

It’s amazing how many factors can have a measurable impact on e-bike range.

Are your tires low on air or pumped to the max? Are you riding uphill or downhill? Tailwind or headwind? Brake rub? Crouched or sitting up tall? Is the road wet? Did you eat a big lunch? Have you eaten big lunches for the last 30 years? What gear are you in? What power level are you in? Knobby or smooth tires? Are you wearing a backpack or carrying cargo on a rack or basket? Any passengers with you? Are you riding on asphalt? Concrete? Dirt? Gravel? Sand? The list goes on and on.

Depending on the answers to those questions, the exact same electric bike could travel 15 miles or 60 miles on a single battery charge. Yeah, it’s wild.

Many people expect e-bike ranges to be more repeatable, similar to car mileage. But then again, consider that unlike cars, which often outweigh their drivers by 20 to 1, you probably outweigh your bike by 3 or 4 to 1. So changes in you or your environment have a much bigger impact on range than they do for other larger vehicles likes cars and trucks.

All of these factors make it harder for e-bike companies to offer a realistic range, and so they usually test for the best-case scenario. That means a lightweight rider (often listed at 150 lb., even though the average American adult female and male each weigh 170 and 200 lb., respectively) riding on a pancake flat and smooth surface with ultra-high air pressure in the tires and with the bike set into its lowest power mode. It’s not “cheating,” assuming they provide the real test data. It’s just putting their best pedaling foot forward. But in the real world, most of us won’t be riding in the same ideal conditions. So the “maximum” range that most e-bike companies quote simply aren’t realistic for most of us.

aventon level 2 review e-bike

Throttle versus pedal assist range

This is another major factor affecting range. Any Europeans reading this, you poor things can ignore this section since your governments don’t believe you can be trusted with throttles. For the Americans, Canadians, Australians, and civil-disobeying Europeans still here with me, listen up.

The general rule of thumb is that throttle riding will nearly halve your range compared to pedal assist. That’s why most e-bike companies will list their maximum range based on pedal assist. When you see an e-bike listed as having a “50-mile range,” that’s almost certainly the pedal assist range. The throttle range is probably closer to 25-30 miles, depending on conditions. A true 50-mile throttle-only range would usually require having a battery of at least 1,300 Wh, or around twice the size of an average e-bike battery.

Some companies like Rad Power Bikes are pretty good about listing a range of ranges (get it?) instead of a single number. For example, they tell us that the RadRunner 3 Plus’s range is “Estimated 25-45+ miles per charge (40-72+ km)” in the specs section of the product page, though they’re still guilty of the slightly misleading “Up to 45 miles per charge” phrase in larger font on the main page.

How can you know an electric bike’s ‘real’ range?

There’s a messy, overgeneralized rule of thumb that I created to quickly judge approximate bike range. But be warned: It requires a small amount of math. Don’t worry though, you can handle it.

At 20 mph, my messy rule of thumb is 25 Wh/mi for throttle riding and 15 Wh/mi for pedal assist riding. This is for a decently powerful level – we’re not talking Eco Mode or Level 1 pedal assist here. At very low-power pedal assist where the rider does most of the work, it is possible to even achieve closer to 5 Wh/mi.

For anyone who uses a more sensical system of measurement, that means when riding at 32 km/h, you can generally expect somewhere around 15 Wh/km on throttle and 9 Wh/km on pedal assist, though it can drop as low as 3 Wh/km on really low power pedal assist.

So to use my rule of thumb, simply divide the watt-hour capacity (Wh) of the battery by my efficiency numbers and you’ll get the rough range. An e-bike like the RadRunner 3 Plus mentioned above with a 624 Wh battery should get roughly 624 Wh ÷ 25 Wh/mi = 25 miles of range on throttle-only riding. In sensical measurements, that’s 624 Wh ÷ 15 Wh/km = 41 km. That number actually aligns nicely with Rad’s published figures. Go figure.

radrunner 3 plus battery

Like I said though, this is a rough approximation. It can vary based on many factors. If you’re a heavy rider, you might even use slightly higher constants than I mentioned, such as 30 Wh/mi instead of 25 Wh/mi. Other factors like terrain and tire width make a big impact on this guesstimate system as well.

For science, I once took an e-bike with a teeny tiny 180 Wh battery on a long ride at the lowest possible power setting and with significant muscle effort on my part. I got a range of 56 miles (90 km), or close to 3 Wh/mi. It was grueling, but it showed what is possible, and how companies can get away with claiming sky-high ranges that may be possible, even if unlikely.

So sure, my generalized rule of thumb above uses fuzzy numbers. But they aren’t anywhere near as fuzzy as the ratings from most e-bike manufacturers.

rad power bikes battery

In conclusion, I don’t intend to claim that there is malice on the part of most companies that market e-bikes. Their goal isn’t to mislead. They’re just caught in an unfortunate system where people want a short and pretty answer to what is under the surface actually a long and ugly question, “How far does it go on a charge?”

So until people are prepared to receive a table of data in response to that question, companies are basically forced to choose between giving an unimpressive albeit more honest range spectrum like, “It can go 20-45 miles per charge,” or to just give the rosier answer of “It can go 45 miles.” With millions of dollars on the line, you can guess which one they prefer to choose.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

GE Vernova lands repower orders for 1 GW of US wind turbines

Published

on

By

GE Vernova lands repower orders for 1 GW of US wind turbines

GE Vernova’s onshore wind business announced that it received orders in 2024 to repower over 1 gigawatt (GW) of wind turbines in the US.

Wind energy repowering is all about breathing new life into older turbines. By swapping out aging parts like turbines, blades, and nacelles for the latest tech, wind farms see significant boosts in efficiency, power capacity, and overall lifespan. Other infrastructure and control systems can also get a second life.

Adding new components to existing infrastructure and grid connections means it’s less expensive to extend the life of the wind farm with fewer resources. New components make the turbines less prone to breakdowns which means less maintenance, so there are fewer operational costs. 

The repowering projects for which GE Vernova received orders will use nacelles and drive trains that it manufactures in its Pensacola, Florida, factory.

“As the United States works to meet the doubling of projected demand for more energy, repower projects like these help US workers in US factories take advantage of what we already have, where we already have it,” said Matt Lynch, general manager of Repower at GE Vernova. 

The orders were booked between the first and fourth quarters of 2024. GE Vernova’s wind repower projects are expected to come online between 2024 and 2027.

GE Vernova’s onshore wind business has a total installed base of approximately 56,000 turbines and nearly 120 GW of installed capacity worldwide.

Read more: Cleantech investments to top fossil fuels for the first time in 2025


If you live in an area that has frequent natural disaster events, and are interested in making your home more resilient to power outages, consider going solar and adding a battery storage system. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. –trusted affiliate link*

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Kia’s NACS adapters available now; Supercharger access still pending

Published

on

By

Kia's NACS adapters available now; Supercharger access still pending

Kia’s official first-party NACS adapters are now ready to ship out, but owners will have to wait to use them on Tesla Superchargers until later this quarter.

The rollout of Supercharger access to non-Tesla brands is hitting a fever pitch this year, with several brands added to the “coming soon” list, and even beyond that, VW and Honda have both made their own announcements that access is coming soon.

But for most vehicles, charging on Superchargers will require an adapter for the time being, as most brands aren’t adding native NACS ports to their vehicles until a future date (the current exceptions are the 2025 Kia EV6 and Hyundai Ioniq 5 which have native ports).

Each manufacturer is dealing with adapter rollouts separately, and Kia’s ready to announce that their adapters are ready to go.

Kia told us today that shipments of first-party adapters are currently en route to dealerships, and certain owners will be getting a notification soon to claim their adapter.

In Kia’s previous announcement about adapter availability, it said that any 2024 or 2025 EV6 or EV9 owners who took delivery after September 4 would get a free NACS adapter. Those owners should receive a push notification soon in their Kia Connect app through which they can claim their adapter.

For other owners, adapters will be available from Kia dealers for $249, which is roughly in line with the average cost we’ve been seeing for these adapters. Dealers should be getting the adapters any day now.

However, these adapters will be of limited usefulness for the next several weeks. You’ll be able to use them to charge at Tesla destination chargers, or any home charger with a Tesla/NACS plug on it, but Supercharger access still requires a handshake between the car and the charging network, and that handshake is currently disabled.

Originally, Kias were going to gain access on January 15th, but that was pushed back until the “back end of this quarter.” Some owners found out a loophole to allow for charging on the network, but that loophole was closed just yesterday.

As a result, Kia is also including “definitive instructions” on how to use the adapters along with each shipment. It wants to ensure that everyone is using them properly, especially given the recent back-and-forth about, uh, unsanctioned methods to access the network before official availability.

Kia’s EV6 with the native NACS port has also taken longer to arrive than Hyundai’s 2025 Ioniq 5. Ioniq 5s are already shipping (and can even charge faster than Teslas at a Supercharger, a feat the EV6 should also achieve), but EV6s haven’t yet hit dealerships. They should be on around the same timeline as Supercharger access, and ought to be available in the back half of this quarter.

So… Kia fans will still have to wait a little bit, but at least you’ll have the adapters ready to go for when the floodgates open later this quarter.

If you’re looking to buy one of the fastest-charging EVs on the road today, use our link to check local dealers and get in line for when they get the new 2025 Kia EV6s in stock.


But when you’re charging at *home*, charge your electric vehicle using rooftop solar panels. Find a reliable and competitively priced solar installer near you on EnergySage, for free. They have pre-vetted installers competing for your business, ensuring high-quality solutions and 20-30% savings. It’s free, with no sales calls until you choose an installer. Compare personalized solar quotes online and receive guidance from unbiased Energy Advisers. Get started here. – ad*

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

Kempower and Ziegler partner on EV fast charging for fleets

Published

on

By

Kempower and Ziegler partner on EV fast charging for fleets

EV charger manufacturer Kempower and Ziegler Energy Solutions have paired up to deliver EV fast charging infrastructure for commercial fleets.

To put it simply, Finland and US-based Kempower brings DC fast chargers to the table, and Ziegler Energy Solutions’ (ZES’s) specialty is infrastructure, energy efficiency, and operational flexibility, along with sales and service.

“As businesses and municipalities increasingly transition to electric fleets, reliable and adaptable EV charging infrastructure with the highest uptime is paramount,” said Troy Monson, general manager of Ziegler Energy Solutions. “Partnering with Kempower enables us to deliver scalable, user-friendly solutions that support our customers’ electrification goals and operational needs.”

ZES, which is now a Kempower Certified Partner, helps fleet operators address challenges like high mileage, uptime demands, and energy cost management using its EV fleet planning tools that simulate real-world scenarios like duty cycles, charging schedules, and energy needs. It also has a leasing program, and integrates solar and battery storage into fast charging infrastructure.

This means Kempower can now offer its DC fast chargers to fleet operators with ZES’s support, ensuring uptime and reliability.

Read more: GM is using AI to find ideal spots for EV charging stations


If you live in an area that has frequent natural disaster events, and are interested in making your home more resilient to power outages, consider going solar and adding a battery storage system. To make sure you find a trusted, reliable solar installer near you that offers competitive pricing, check out EnergySage, a free service that makes it easy for you to go solar. They have hundreds of pre-vetted solar installers competing for your business, ensuring you get high quality solutions and save 20-30% compared to going it alone. Plus, it’s free to use and you won’t get sales calls until you select an installer and share your phone number with them.

Your personalized solar quotes are easy to compare online and you’ll get access to unbiased Energy Advisers to help you every step of the way. Get started here. –trusted affiliate link*

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending