Autonomous EV freight developer Einride announced another key milestone today, deploying full-time, commercial operations with longtime partner, GE Appliances. The autonomous trucks are navigating between GE’s manufacturing facility and warehouse, demonstrating a case for scaled commercialization in the electric freight industry.
Today’s milestone is another notable achievement for a relatively young company like Einride, which was founded in Sweden less than eight years ago. In that time, we’ve followed much of the autonomous truck company’s progress, including partnerships with companies like Maersk and Beyond Meat, as well as expansions into new markets like Germany.
After announcing plans to set up a new headquarters in the US, we’ve seen Einride make huge strides in all-electric autonomous freight mobility the past two years. In June of 2022, the company received approval from the National Highway Traffic Safety Administration (NHTSA) to begin piloting its Pod trucks – marking the first time a purpose-built autonomous, electric truck without a driver on board has received permission to operate on public US roads.
At the time, we reported that Einride’s client, GE Appliances would serve as the key partner in the initial US pilot program to both test and showcase the commercialization capabilities of the autonomous, electric Pod trucks.
18 months later, Einride has shared a progress update with GE in which the former has begun full-time autonomous truck operations between two of the latter’s facilities in Tennessee.
Einride’s autonomous trucks run daily for GE Appliances
Following a successful public road pilot program with GE Appliances last year, Einride reports that its zero-emission autonomous trucks are now operating in Selmer, Tennessee, Monday through Thursday – completing up to seven shuttles of finished goods per day.
The trucks autonomously navigate 0.3 miles between GE Appliances’ manufacturing facility and warehouse while being monitored by one of Einride’s Remote Pod Operators, who can take control of the EVs if needed. In this case, Einride’s first remote operator, Tiffany Heathcott is monitoring the trucks on-site, rather than from her usual hub in Texas.
A relatively short route to begin, yes, but still a milestone for autonomous freight, as Einride’s Trucks are successfully navigating public roads around the clock with no humans present. Henrik Green, Einride’s general manager of autonomous technologies, spoke:
We are very proud to partner with GE Appliances and be able to lead the industry in providing autonomous technology and deploying it in the strongest commercial use case today. We look forward to continuing this work to establish autonomous’ key role in transportation, both with GE Appliances and other partners across markets.
Einride states that its autonomous truck operation is part of a larger project in Selmer with GE, which also includes other industry partners with the goal of creating a freight logistics flow that is entirely automated.
For instance, GE Appliances has also partnered with TaskWatch, whose AI cameras trigger a control board that raises and lowers GE’s dock doors and dock plate, then locks the Einride truck into place. The system then notifies a robot that the autonomous truck is ready to load. The robots come from another GE partner – Slip Robotics – whose technology can autonomously load and unload the vehicles, reducing times by 80%.
Together, Einride and GE Appliances hope to demonstrate the potential of a streamlined holistic logistics system that extends well beyond autonomous, zero emissions trucks and into every single aspect of the process – from factory to delivery. Per Harry Chase, senior director of central materials at GE Appliances:
Our partnership with Einride in Selmer reflects our evolved approach to robotics and automation technology. We are moving from implementing one-off solutions addressing various challenges to creating interoperability among systems that can build consistency and streamline processes in our factories and throughout our supply chain. This implementation in Selmer is helping us reduce emissions, allowing our employees to focus on high value tasks, reducing traffic in congested areas to create a safer work environment, and eliminating some of the most challenging ergonomic tasks like climbing on and off a forklift and hooking and unhooking trailers. We believe robotics and automation technology should work with and for people to improve their jobs.
FTC: We use income earning auto affiliate links.More.
Owner-operators are a huge part of the heavy truck market, and they’ve been among the most hesitant groups to transition from diesel to electric semi trucks. That may be changing, however, as Saldivar’s Trucking becomes first independent owner-operator in the US to deploy a Volvo VNR Electric Class 8 truck.
The higher up-front cost of electric semi trucks has been a huge obstacle for smaller fleets. That’s there are incentives from governments, utilities, and even non-profits to help overcome that initial obstacle. And the smart dealers are the ones who are putting in the hours to learn about those incentives, educate their customers, and ultimately sell more vehicles.
TEC Equipment is a smart dealer, and they worked closely with South Coast Air Quality Management District to secure the CARB funding and ensure Saldivar’s was able to ssecure $410,000 in funding from CARB’s On-Road Heavy-Duty Voucher Incentive Program (HVIP), which provides funding to replace older, heavy-duty trucks with zero-emission vehicles. The program is directed exclusively to small fleets with 10 vehicles or less that operate in California and aims to bridge the gap between the regulatory push for clean transportation and the financial realities faced by small business owners.
“TEC Equipment has been instrumental in supporting owner-operators like Saldivar’s Trucking through the transition to battery-electric vehicles,” explains Peter Voorhoeve, president of Volvo Trucks North America. “Their dedication to providing comprehensive support and securing necessary funding demonstrates how crucial dealer partners are in turning the vision of owning a battery-electric vehicle into a reality for fleets of all sizes.”
Saldivar’s Volvo VNR Electric features a six-battery configuration, with 565 kWh of storage capacity and a 250 kW charging capability. The zero-tailpipe emission truck can charge to 80% in 90 minutes to provide a range of up to 275 miles.
“While large fleets often make headlines for their ambitious investments in battery-electric vehicles, nearly half of the 3.5 million professional truck drivers in the U.S. are owner-operators running their businesses with just one truck,” adds Voorhoeve. “These small operations face unique challenges, from the initial capital investment to securing adequate charging infrastructure … this collaboration is a perfect example of the important role to be played by truck dealers and why stakeholders need to work together to succeed in this new era of sustainable transportation.” We need solutions that work for different fleets of all sizes in the marketplace,” added Voorhoeve.”
Electrek’s Take
Electrifying America’s commercial trucking fleet can’t happen soon enough – for the health of the people who live and work near these vehicles, the health of the planet they drive on, and (thanks to their substantially lower operating costs) the health of the businesses that deploy them. TEC is doing a great job advancing the cause, and acting as true expert partners for their customers.
Mercedes released a look at the powertrain technology of its upcoming electric CLA, and it includes tons of neat EV tech and some interesting options for battery technology and what looks to be the most flexible charging system we’ve seen yet.
We’ve already learned a fair amount about the CLA after first seeing the concept last year, and Mercedes released a few new specifics today regarding its powertrain.
In keeping with previous information we knew, the CLA is targeting extremely high efficiency of 12kWh/100km, which translates to just 193Wh/mi or 5.2mi/kWh. That’s more efficient than anything else on the road today – with Lucid’s Air Pure reaching 200Wh/mi, or 5mi/kWh. And just less than what Tesla is claiming the Cybercab will be capable of, at 5.5kWh/mi.
This is thanks to Mercedes’ new compact EDU 2.0 electric motor, which is part of its new Mercedes Modular Architecture (MMA) which will underpin its upcoming electric vehicles. The drive motor will be 200kW on the rear axle, though all-wheel drive models will be available with an additional 80kW unit on the front axle. A two-speed transmission will ensure efficiency at high speeds and low.
For more efficiency in cold weather, the CLA will use an air-to-air heat pump which is able to capture heat from the motor, battery, and ambient air to heat the cabin. While batteries and motors don’t make nearly as much waste heat as inefficient ICE engines, it’s still good to be able to channel heat to wherever you need it.
Mercedes says that the CLA will come equipped with a choice of two different batteries, each with different chemistries.
The larger 85kWh model will be capable of an unnecessarily-high 750km (466mi) of WLTP range – though WLTP numbers are always higher than EPA numbers, so expect something in the high-300s in EPA parlance. This battery will add silicon oxide to the anode for higher energy density, a technology that has been pioneered by Sila Nanotechnologies, a company which Mercedes is a lead investor in.
The smaller battery will be 58kWh, and will use lithium iron phosphate (LFP) chemistry. LFP is a cheaper but lower energy density technology, with higher long-term durability and simpler sourcing of minerals (it uses no cobalt, whereas Mercedes says cobalt has been “reduced” in the larger batteries). However, LFP generally has slower fast charging and cold weather performance.
On charging: the “premium” battery will have an 800V configuration capable of up to 320kW charging speeds. Mercedes says this can add 300km (186mi) of range in 10 minutes, and also says that the car will have a broad charging curve, which means you’ll get high charge rates even if the battery isn’t close to empty. It didn’t specify if the smaller LFP battery will have the same charge rate.
This high charging rate allowed Mercedes to set a record traveling 3,717km (2,309mi) in 24 hours at the Nardo test track in Italy in a pre-production CLA. That’s an average travel rate of 96mph – including time spent charging.
We also learned something about Mercedes’ NACS adoption plans. While just about everyone has committed to transitioning cars to NACS, it has taken longer than expected (largely due to Tesla’s chaotic CEO firing the whole supercharger team for little reason), and few cars have native NACS inlets yet. Some brands can already charge at Superchargers with adapters, but Mercedes is still on Tesla’s “coming soon” page.
As a result of delays in onbaording automakers, some seem to have pulled back on their plans, pushing NACS ports to later model years. But Mercedes has a new and unique solution – it will just put both CCS and NACS ports on the CLA, right on top of each other.
Mercedes says “in the future, new entry-level models will be capable of bidirectional charging,” but isn’t clear whether this model will be capable of that.
Electrek’s Take
While this is short of a full release of specs, we’re excited by what we see here. Mercedes seems to confirm that they’re meeting the efficiency goals they set out, and we like that they’re offering a variety of options and taking advantage of some newer EV tech like 800V charging infrastructure.
The inclusion of both NACS and CCS is very interesting, again offering options to owners during the transition. That seems to be the big message from Mercedes here – we’re not going to just pick one tool, we’re going to use all of them.
But pricing and availability are obviously big questions, as is design.
The concept looks fantastic, but concepts always change on their way into production. The shape of the camouflaged test vehicle is very different – but looks to have some shrouding on the front and back to hide its shape, so we’ll have to wait until we see this thing unveiled for more.
And as for pricing – Mercedes says the CLA will be an “entry-level” car, but who knows what that means anymore these days. The base ICE CLA starts at around $44k currently, so lets see if they can hit that number.
Charge your electric vehicle at home using rooftop solar panels. Find a reliable and competitively priced solar installer near you on EnergySage, for free. They have pre-vetted installers competing for your business, ensuring high-quality solutions and 20-30% savings. It’s free, with no sales calls until you choose an installer. Compare personalized solar quotes online and receive guidance from unbiased Energy Advisers. Get started here. – ad*
FTC: We use income earning auto affiliate links.More.
Daimler Truck North America has helped alcohol distributor Reyes Beverage Group deploy fully 29 zero-emission Freightliner eCascadia Class 8 electric semi trucks in its California delivery fleet.
Reyes Beverage Group (RGB) plans to deploy the first twenty Freightliner electric semi trucks at its Golden Brands – East Bay and Harbor Distributing – Huntington Beach warehouses, marking the first phase in the company’s transition to a fully zero emission truck fleet by 2039. An additional nine eCascadia Class 8 HDEVs are scheduled for delivery to RBG’s Gate City Beverage – San Bernardino warehouse before the end of 2024.
RBG’s decision to adopt the Freightliner eCascadia builds on its recent transition to renewable diesel and its ongoing idle-time reduction program. These electric vehicles (EVs) “go electric” will contribute significantly toward the company’s stated goal of reducing its carbon emissions 60 percent by 2030. These 2 trucks will save some 98,000 gallons of diesel fuel annually, and avoid putting nearly 700 metric tons of carbon dioxide and other harmful emissions into California’s air each year.
“We are excited to be among the first in our industry to adopt these electric vehicles,” explains Tom Reyes, President of RBG West. “This is a significant step toward our sustainability goals and ensuring compliance with state regulation as we transition our fleet to EV.”
Freightliner’s eCascadia electric semi trucks offer a number of battery and drive axle configurations with ranges between 155 and 230 miles, depending on the truck specification, to perfectly match customers’ needs without compromising on performance and load capacity. RBG’s Freightliner eCascadia tractors will rely on electric charging stations installed at each facility, allowing them to recharge to 80% capacity in as little as 90 minutes for RGB’s trucks, which feature a typical driving range of 220 miles as equipped.