Published
2 years agoon
By
admin1.2K
I wrote about modern airguns before and whether PCP air rifles are worth the money. One topic was whether these rifles have adequate power to humanely harvest small game. This criteria rules out most air pistols, especially springers. For those who missed it, heres a rehash of each design.
Regarding springers, many of todays adult-type .177 or .22-caliber pellet guns are barrel-cocking designs. Upon discharge, a piston driven by a compressed spring generates a blast of pressurized air to expel a pellet. Inherent to the design, achieving sufficient power for humane small game hunting usually requires a large rifle. Like others, this stalwart springer is simple and reliable. But, it finally saw a time-out due to a temporary medical weight restriction. The 40-pound cocking effort became a problem.
Its discharge also creates a unique reverse-recoil impulse which can destroy a non airgun-rated optic. These dynamics can result in a hold-sensitive gun that requires consistent techniques for optimum accuracy. Greater power also requires substantial cocking effort – and the spring shouldnt remain compressed, which complicates hunting.
The latest gas-piston barrel-cockers solve the latter concern, but power still translates to size – and some advertised velocities are optimistic. On a positive note, a springer is a self-contained system.
Most of the drawbacks associated with springers disappear through pre-charged airguns. Their projectiles are expelled through release of high-pressure air from an onboard reservoir. Some big-bore .45 or .50-caliber types only provide a few shots before refilling becomes necessary.
But, a useful .22/800 fps small game hunting benchmark is easily attainable from a 6-7 pound gun capable of providing 25 shots or more. Today, many are even repeaters that feed from rotary magazines. Pricing of some PCP guns now rivals mid-grade springers. But a PCP gun does require extra gear, dependency on a fill-source, and the added expense of necessary equipment.
PCP advances aside, for those seeking a non-complicated, affordable, and self-contained airgun capable of pest control or small game hunting, a springer is still a good bet. Humane harvesting of gray squirrel-sized quarry requires a rifle with some heft and cocking effort, but many springers can achieve 800 fps (or more) using standard-weight .22-caliber pellets. With careful shooting (actually true of all airguns) thats enough punch to do the job inside 40 yards or so.
However, many serious shooters seek maximum performance and enjoy the associated technical aspects. To scratch those itches the PCP field offers an intriguing new frontier. And heres another twist; one I just encountered. While recovering from a recent surgery I was in need of some therapeutic backyard plinking.
Normally, Id just grab a hassle-free springer. Trouble was, a temporary 10-pound weight restriction rendered it useless due to the necessary cocking effort. Same story for a trusty pump-up pneumatic. No worries though. Two fully charged PCP rifles were on hand, along with an easily accessible scuba tank.
After a rejuvenate 45-shot session spent ringing small steel targets from the back deck out to 100 yards, the gun was easily recharged through a twist of the tanks knob. Operation of this intermediate-sized side-lever cocking .22-caliber PCP 10-shot repeater is nearly effortless. Its 2900 PSI reservoir provides around 40 recoil-free shots when adjusted to 800 fps. Downsides include cost and dependency on a separate air source. Pre-charged Air Rifles – The Basics
First up, pre-charged pneumatic guns operate at some serious pressures! Even the lower-pressure types hold 2000 PSI. More are charged to around 2900 PSI (often expressed as 200 BAR), but some now run at 3650/250 BAR – or even higher! Air reservoir capacities also vary, but their volume is typically expressed in cubic centimeters, which could range from 100 to 500 CCs.
Larger reservoirs and higher pressures translate to more shot per fill. Repressurizing such a gun is accomplished via a special PCP hand-pump, a scuba tank, or an airgun compressor (see below).
Usually, a short length of high pressure air (HPA) hose provides the necessary connection between the gun and its air source. The fittings can vary, depending upon the air source and the gun. This can create some confusion for new shoppers (more to follow).
As for the guns, many can be pressurized by connecting the hose to a common Foster air-tool nozzle. Using this system, a female QD fitting on the end of the hose simply snaps on to the guns male nozzle (via a spring-loaded collar). Others are filled through small port that accepts a male probe.
My Air Arms guns employ a proprietary brass collar with a corresponding fill-port. For this reason most pre-charged guns ship with the necessary fill adapter. Fortunately, nearly all utilize the common 1/8 BSPP thread pattern. How to Fill PCP Air Rifles
A PCP guns operating pressure and air capacity can have a bearing on the air source, something worth considering prior to finalizing a PCP purchase. Heres why Hand Pump
As noted in the previous post, the special PCP hand-pumps closely resemble a heavy-duty bicycle pump. The difference is their performance! They do provide total air independence, but lots of exercise will be a byproduct, making smaller-CC guns are better choices.
Accumulating water can be another concern although some incorporate moisture traps. Recently, complete PCP gun and pump packages have appeared, often priced to attract newer shooters. For more casual use in smaller guns theyll suffice, but higher-performance guns will probably need more. Especially when dealing with the latest 3500+ PSI guns, the final stages of pressurization require lots of effort.
The Hill Hand Pumps are longstanding favorites and some are now rated to deliver 4500 PSI/310 BAR! Given this level of performance, a Hills $270 price isnt that far above average costs of around $200. Most also come with a properly matched HPA hose set up for a female QD fitting and the batter ones can be rebuilt using replacement parts. Sale FOUR UNCLES High Pressure Hand Pump 4500 Psi PCP Hand Pump PCP Air Rifle (Black) ?Efficient Design?This pcp air pump with sleek stainless steel construction smooth upward and downward motion. 8mm copper female quick connector allows to withstand over 10,000 times of tear and wear, giving it an extended life.?HPA Pump with safety?The air rifle pump provide high pressure air up to 4500 psi or 40MPA. While the flexible micro-bore hose provides best performance, can bear up to 80MPA, safeguarding your safety with superior quality. $67.99 Buy on Amazon
Charging: Typically, a short length of HPA hose is connected to the pumps outlet at the bottom of the pump. The other end is attached to the gun. A pressure gauge on the pump then monitors the charging process, which is accomplished through deliberate strokes.
The idea is to use the entire upper body while flexing at the knees probably with a break or two thrown in. Recharging an empty gun could be brutal but, more often, partial depletion of shooting pressure results in less exertion. Either way, upon reaching the guns desired pressure level, a crucial step remains! Before disconnecting the hose, a small bleeder-valve must be cracked to vent potentially dangerous residual pressure.
The bleeder is usually a small brass knob located near the pumps outlet and pressure gauge. After the hose is vented it can be safely disconnected from the gun. If the hose remains attached to the pump, it can be covered with a plastic bag to ward off dust.
The pumps advantage is air independence in a reasonably-ized package (some folks also use one to augment a scuba tank when its pressure subsides). Its downside: Not everyone is up to the physical requirements. Even a smaller-sized PCP gun will probably require two or more pump-strokes per shot. Scuba Tank
My larger-volume .22-caliber Air Arms 400 FAC offers 45 useful shots at 920 fps when fully charged to 2900 PSI/200 BAR. That translates to lots of hand-pumping. Given the price of the gun and pump-related moisture concerns, for me, a tank became the logical alternative. A well-used 80 CF aluminum tank hooked up to refill this 2900 PSI/190 BAR Air Arms .22 single-shot. Each fill is good for 45 useful shots at 900+fps.
Scuba tanks come in various sizes (50-150 CF), and are built from three main materials; aluminum, steel, or carbon-fiber. The more common flat-bottom, 63 or 80 CF aluminum versions are practical corrosion-free choices, the latter weighing around 35 pounds when filled to 3000 PSI (an equivalent steel version is actually lighter due to its thinner walls).
I bought a standard aluminum 80 cubic-foot tank used at a local dive shop and eventually snagged two more, the last one for $150 (I also brought the airgun to allay liability concerns). Most metal tanks including mine employ a threaded-in K-Valve. Beyond a main on/off control knob, this part is designed to quickly connect with dive regulators. But, by attaching a different manifold (known as a yoke), an HPA hose can be connected to this part.
Carbon-fiber tanks are surprisingly light but also quite expensive. These (and fire-fighting SCBA versions) typically employ a different-type DIN-valve; a threaded heavy-duty stem. Nevertheless, most well-stocked airgun dealers inventory the necessary PCP gun adapters.
Because they have a finite DOT-regulated 15-year life, a new CF tank is the best bet. Recently, reconditioned CFs became DOT-approved, however they require 5-year inspections via a specialized Colorado-based source (which for most of us will involve shipping). Lightweight CF tank shown with a yoke and HPA hose assembly.
All-metal tanks need an annual internal visual inspection, and a more in-depth hydro-test every five years. A further concern for aluminum tanks involves its manufacture date. Those built in the U.S. after 1988 use stronger alloys to prevent neck cracking. For this reason, mine all came from a trusted dive shop with current tests.
Speaking of dive shops, assuming one is in your area, it may be well worth a visit prior to investing in a gun. Some might not be equipped to handle every fill option. Because my shops compressor cant reach the highest gun pressures (of 3500 PSI or more) any future gun shopping will be limited to 200 BAR types. But, thats adequate for me and works with my existing tanks, some of which are now quite old.
If one finally flunks its inspection, well, good enough. Meanwhile, refills cost just a few bucks and, when pressurized to around 3200 PSI with pure, moisture-free breathing air, numerous gun refills are available. Thats because I often dont shoot through the guns entire air supply. Assuming I consistently did so, Airguns Of Arizonas handy tank calculator indicates I should be good for around 13 refills from my 80 CF tank.
Since each top-off provides 45 useful shots, thats more than a tin of 500 pellets. At that point, within moments, I can transfer the yoke/hose assembly to a fully-charged spare tank. The empty can head to the dive shop when time permits. One kicker though: Right now Ill need help carrying it!
Consult the tank fill calculator before filling. K-valve and yoke assembly, ready to attach. The bleeder-knob is to the left of the pressure gauge. Note the inspection label on the tank. Yoke assembly attached. The gauge shows some pressure.
Charging: Using a common K-valve aluminum tank as an example, attachment of the necessary yoke is easily accomplished using its thumb-screw. The yokes housing also makes the perfect spot for a pressure gauge and bleeder valve. My hose is threaded into the yoke, but I couldve used a QD system identical to the fitting on its opposite end.
The male Foster-type stem of my proprietary Air Arms collar will snap into the hoses QD female fitting. The collar then slips over a nozzle on the gun where a 90 degree twist will securely lock it in place under a T-bar. Next, the knob on the scuba tank is slowly cracked to decant air. The yokes pressure gauge is carefully monitored and, since even slow filling generates heat, a short cooling pause is followed by a final top-off.
Actual fill-time is still nearly instantaneous, so the tank is opened with caution. Upon reaching (never exceeding) the operating pressure, the tanks air supply is turned off. The bleeder valve is then cracked (emitting a tell-tale hiss), and the hose is disconnected from the gun. I Leave the yoke/hose assembly connected to the tank and cover it with a plastic bag. The proprietary brass gun fitting has been attached to a QD female Foster hose fitting. It’s ready to lock onto the reservoir. Ready to refill with HPA air. The gun has been filled and the tank’s air supply has been shut off – but note the remaining pressure in the hose! Cracking the small brass bleeder knob will safely vent it prior to disconnection of the hose from the gun.
The charging accessories will add another $100 but, in my case, thanks to used tank pricing, the systems cost was comparable to a decent pump. Compressors
The standard shop-types wont work, but an airgun model will do the job for those willing to incur the expense. So far Ive resisted one, although some aficionados own a compressor because its possible to a fill scuba tank as well as a PCP gun. A few newer types are also fairly compact and easier to handle than a full-size dive tank. Umarex ReadyAIR HPA Portable Air Compressor Pump for PCP Air Rifles and Airguns The smartest portable airgun compressor in its class; Engineered and built with robust quality componentsElectronically controlled with a digital display; Programmable fill pressure allows you to fill your air rifles to their unique recommended pressure $669.99 Buy on Amazon
Prices have also decreased and some now start at around $650 but, of course, others cost much more. Some will run on AC or DC power so, ss long as you have a compatible power source, an infinite supply of filtered HP air will be available. Fill-time for an average airgun is several minutes but, of course, a tank can take longer.
Charging: The process is similar to scuba. Compressing large volumes of air can generate considerable heat which could damage the unit, so overload protection is usually incorporated. Necessary Connections
Do you need male adapters or female types, and what about fittings? The choices are a bit daunting. I wound up buying the properly matched yoke and hose from the local dive shop that sold me the scuba tank. We assembled the parts in the well-stocked store and made sure everything worked before I left.
This happened 13 years ago when PCP technologies were still obscure. Given the various tank designs, rated pressures and valve systems (K or DIN), its still not a bad approach for those contemplating the scuba route. Or, if you do your homework first, another option is a well-stocked dealer who specializes in airguns. This Air Arms system is a bit unusual. Fortunately, the necessary brass collar-fitting came with the gun. Tech Support
Today, several on-line airgun dealers make great starting points. Among them is Pyramid Air. Scrolling through their website, youll see pumps, various tanks, and compressors. Youll also see all kinds of HPA fittings and hoses, including some preassembled on pumps or scuba yokes. For what its wort, they also have an extensive airgun inventory so a phone call should point you in the right direction.
Some airgunners run multiple guns off one charging system. By using the correct QD hose fittings they quickly snap on different fill adapters. If assembling your own fill system, use Teflon tape on the threads to prevent leaks. Also, a very short hose can be inconvenient. Other Factors
Remember, the highest-pressure guns require air sources up to the task. A gun can work if charged below its maximum pressure, but its performance will be hamstrung. As mentioned above, a few hand-pumps and some compressors can get there. Todays lightweight carbon-fiber tanks can also take some serious pressure like 4500 PSI – but youll still need a way to fully charge one.
Not all dive shops have that capability, but some fire stations may. A few airgunners even use high-pressure SCBA tanks after adding an adapter to the valve. However, beyond the gun, fittings and hoses must also be properly rated! Cautions and Concerns
High-pressure air is serious stuff. Forgetting to bleed a hose can be a memorable event. A dropped tank can turn one into a rocket; a hot trunk into a bomb! The gun wrong lubes can produce similar effects due to pressure-related heat ignition. Alternate gasses are also dangerous (some serious airgunners use nitrogen but Im staying with air). Over-pressurizing a gun is bad and can even be counterproductive.
For me and many others, velocity becomes much more consistent at a bit below maximum safe pressure. Todays increasingly popular regulated guns offer a consistent velocity spread throughout their useful charge, but even simpler non-regulated versions like mine can deliver sustained accuracy once optimum pressure parameters have been established.
A guns built-in pressure gauge (manometer) is the normal refill indicator. However, people in the know advise regulating the process using a fill sources separate gauge. There can be disparities like the fill lag Ive seen in one of Air Arms rifles. The gun’s BAR-rated gauge says it’s time for more air. The safe upper limit is 200 BAR (2900 PSI). Use the air supply’s gauge for a more accurate reading.
Dust and debris are enemies that can cause slow leaks so its best to leave pressure in the gun. I store mine fully charged (or near that level) BUT the gun remains un-cocked! Inherent to the design, determining a PCPs load status is difficult. The safest bet is to point it a safe backstop (absent a magazine for repeaters), cock it, and shoot. Unlike a springer, an occasional dry-fire (still dangerous at close range due to the HPA blast) wont damage the gun. Also, be sure to observe muzzle discipline while performing refills!
As for bore cleaning, most folks including me use a flexible pull-through system. I just use a patch lightly moistened with Break-free CLP after every tin of 500 pellets or so. The gun is inverted to prevent introduction of foreign materials into the barrels air-transfer port. The same lube will also handle exterior metal surfaces. The O-rings that mate with my fill adapter receive a sparing film of divers silicone.
Lastly, at some point, a PCP gun may develop a leak. A weak point is the internal O-rings which, despite scrupulous maintenance, could eventually dry out. Ive had that happen, but full function was restored thanks to the properly equipped dealer who sold me the gun. Much of the expense related to shipping, which can be the biggest hassle. Conclusion
At this point, a springer could sound a whole lot more attractive! That said though, the quiet and recoil-free performance of a PCP gun, coupled with typically uncanny accuracy, can make for some fascinating shooting. Quarter-size (or smaller) 50-yard groups are the norm. Ive experienced blips of inconsistent accuracy from powder-burning guns, but my air-powered pre-charged wonders always seem to be spot-on. Why? No barrel-heating or fouling perhaps.
The absence of firearms-related stigmas and hassles is also refreshing. The Feds dont regulate airgun purchases so we can even have em shipped to our doors.

You may like
US
At least 51 people killed in Texas flooding as authorities face scrutiny over response
Published
2 hours agoon
July 6, 2025By
admin
At least 51 people have died after heavy rain caused flash flooding, with water bursting from the banks of the Guadalupe River in Texas.
The overflowing water began sweeping into Kerr County and other areas around 4am local time on Friday, killing at least 43 people in the county.
This includes at least 15 children and 28 adults, with five children and 12 adults pending identification, Kerr County Sheriff Larry Leitha said at a news conference.
In nearby Kendall County, one person has died. At least four people were killed in Travis County, while at least two people died in Burnet County. Another person has died in the city of San Angelo in Tom Green County.

People comfort each other in Kerrville, Texas. Pic: Jason Fochtman/Houston Chronicle via AP

Large piles of debris in Kerrville, Texas, following the flooding. Pic: Reuters//Marco Bello

An unknown number of people remain missing, including 27 girls from Camp Mystic in Kerr County, a Christian summer camp along the Guadalupe River.
Rescuers have already saved hundreds of people and would work around the clock to find those still unaccounted for, Texas governor Greg Abbott said.
But as rescue teams are searching for the missing, Texas officials are facing scrutiny over their preparations and why residents and summer camps for children that are dotted along the river were not alerted sooner or told to evacuate.
More on Texas
Related Topics:
AccuWeather said the private forecasting company and the National Weather Service (NWS) sent warnings about potential flash flooding hours before the devastation, urging people to move to higher ground and evacuate flood-prone areas.

Debris on the banks of the Guadalupe River in Hunt. Pic: AP Photo/Julio Cortez

An overturned vehicle is caught in debris along the Guadalupe River. Pic: AP
The NWS later issued flash flood emergencies – a rare alert notifying of imminent danger.
“These warnings should have provided officials with ample time to evacuate camps such as Camp Mystic and get people to safety,” AccuWeather said in a statement that called Texas Hill County one of the most flash-flood-prone areas of the US because of its terrain and many water crossings.
But one NWS forecast earlier in the week had called for up to six inches of rain, said Nim Kidd, chief of the Texas Division of Emergency Management.”It did not predict the amount of rain that we saw,” he said.
Officials said they had not expected such an intense downpour of rain, equivalent to months’ worth in a few short hours, insisting that no one saw the flood potential coming.
One river near Camp Mystic rose 22ft in two hours, according to Bob Fogarty, meteorologist with the NWS’s Austin/San Antonio office. The gauge failed after recording a level of 29.5ft.

A wall is missing on a building at Camp Mystic in Hunt, Texas. Pic: AP/Julio Cortez

Bedding items are seen outside sleeping quarters at Camp Mystic. Pic: AP/Julio Cortez

A Sheriff’s deputy pauses while searching for the missing in Hunt, Texas.Pic: AP/Julio Cortez
“People, businesses, and governments should take action based on Flash Flood Warnings that are issued, regardless of the rainfall amounts that have occurred or are forecast,” Jonathan Porter, chief meteorologist at AccuWeather, said in a statement.
“We know we get rain. We know the river rises,” said Kerr County Judge Rob Kelly, the county’s top elected official. “But nobody saw this coming.”
Judge Kelly said the county considered a flood warning system along the Guadalupe River that would have functioned like a tornado warning siren about six or seven years ago, before he was elected, but that the idea never got off the ground because “the public reeled at the cost”.

A drone view of Comfort, Texas. Pic: Reuters

Officials comb through the banks of the Guadalupe River in Hunt, Texas. Pic: AP/Julio Cortez
Homeland Security Secretary Kristi Noem was asked during a news conference on Saturday whether the flash flood warnings came through quickly enough: “We know that everyone wants more warning time, and that is why we are working to upgrade the technologies that have been neglected for far too long.”
Presidential cuts to climate and weather organisations have also been criticised in the wake of the floods after Donald Trump‘s administration ordered 800 job cuts at the science and climate organisation NOAA, the parent organisation of the NWS, which predicts and warns about extreme weather like the Texas floods.
A 30% cut to its budget is also in the pipeline, subject to approval by Congress.
Read more from Sky News:
Elon Musk says he’s created his own political party
Trump’s ‘big beautiful bill’ passes final hurdle in Congress
Professor Costa Samaras, who worked on energy policy at the White House under President Joe Biden, said NOAA had been in the middle of developing new flood maps for neighbourhoods and that cuts to NOAA were “devastating”.
“Accurate weather forecasts matter. FEMA and NOAA matter. Because little girls’ lives matter,” said Frank Figliuzzi, a national security and intelligence analyst at Sky’s US partner organisation NBC News.
UK
How Prevent is tackling young extremism 20 years after the 7/7 bombings
Published
5 hours agoon
July 6, 2025By
admin
Radicalised nine-year-olds, teenagers mixing incel culture with extreme right ideologies and a Muslim who idolises Hitler – this is just some of the casework of those tasked with deradicalising young extremists in the UK.
Monday will mark 20 years since the 7/7 attacks on the London transport network when four suicide bombers killed 52 people and injured 770 others.
A year later the government set up its deradicalisation programme Prevent as part of its counter-terrorism strategy.
Sky News has spoken to two leading intervention providers (IPs) at Prevent who both say their work is getting ever more complex and the referrals younger.
The Metropolitan Police’s Prevent co-ordinator, Detective Superintendent Jane Corrigan, has also told Sky News it is “tragic” that when it comes to terrorism, “one in five of all our arrests is a child under 17”.
She believes parents should talk to their children about what they are reading and seeing online.
“Parents instinctively know when something doesn’t feel right when their child is becoming withdrawn or isolated – not wanting to engage,” she says.
More on Prevent
Related Topics:
People worried that someone they know has thoughts that could lead to terrorism can refer them to Prevent.

File pic: iStock
‘A pic-n-mix of ideologies’
Home Office figures show 11-year-olds are the largest age group to get referred.
Concerning cases are passed on to IPs such as Nigel Bromage who told Sky News: “Often there will be a pic-n-mix of ideologies.
“From my own examples and experience, we are aware of people looking at the incel culture and mixing that with some far-right elements.”

Sky’s Jason Farrell with intervention provider Nigel Bromage, who was exposed to extremism when he was a child
Incels, meaning “involuntary celibates” are men who have been unable to have a relationship with women despite wanting one and become misogynistic and hateful as a result.
Like many IPs, Mr Bromage from Birmingham comes from an extremist background himself, having once been a regional organiser for the proscribed Neo-Nazi group Combat 18.
For him too, it began as a child.
“It all started with someone giving me a leaflet outside my school gates,” Mr Bromage says.
“It told me a horrific story about a mum getting killed by an IRA bomb explosion – and at the end of the leaflet there was a call to action which said: ‘If you think it’s wrong then do something about it’.”
He developed a hatred for Irish republican terrorism which morphed into general racism and national socialism.
“At the very end I thought I was going to go to prison, or I would end up being hurt or even killed because of my political beliefs,” he says.

Mr Bromage says his youngest case involved a nine-year-old
Boy, 9, groomed by his brother
Mr Bromage reveals his youngest case was a nine-year-old who had been groomed by his brother.
“He was being shown pro-Nazi video games, and his older brother was saying ‘when I go to prison or I get in trouble – they you’re the next generation – you’re the one who needs to continue the fight’,” he says.
“Really, he had no interest in the racist games – he just wanted to impress his brother and be loved by his brother.”

Every year, nearly 300 children who are 10 or younger are referred to Prevent.
Home Office figures show that over the last six years 50% of referrals were children under the age of 18.
Eleven-year-olds alone make up a third of total referrals, averaging just over 2,000 a year, with the figure rising even higher in the most recent stats.
Another IP, Abdul Ahad, specialises in Islamic extremism.
He says the catalyst for radicalisation often comes from events aboard.
Ten years ago, it was Syria, more recently Gaza.
“It is often a misplaced desire to do something effective – to matter, to make a difference. It gives them purpose, camaraderie and belonging as well – you feel part of something bigger than you,” he says.

Fifty-two people were killed on 7 July 2005 when four suicide bombers blew up three London Underground trains and a bus. Pic: PA
Clients want someone to ‘hear them’
Some of his clients “don’t fit into any particular box”.
“I’m working with a guy at the minute, he’s a young Muslim but he idolises Hitler and he’s written a manifesto,” he says.
“When you break it down, some people don’t know where they fit in, but they want to fit in somewhere.”
Mr Ahad says the young individual mostly admires Hitler’s “strength” rather than his ideologies and that he was drawn to darker characters in history.
Often his clients are very isolated and just want someone to “hear them”, he adds.
Read more:
What is Prevent – and why is it controversial?
PM warns of new kind of terror threat

Intervention provider Abdul Ahad specialises in Islamic extremism
Mr Ahad is also an imam who preaches at the Al-Azar Mosque in South Shields, a well-regarded centre for community cohesion and outreach.
He uses his understanding of the Islamic faith in his Prevent sessions to help guide his referrals away from extreme interpretations of the Koran by offering “understanding and context”.
He says: “We quote the correct religious texts – we explain their responsibility as a Muslim living in the UK and we re-direct their energies into something more constructive.”
Common theme of mental health issues
Mental health problems are a common theme among those referred to Prevent including depression and autism.
A recent inquest into the death of autistic teenager Rhianan Rudd found she took her own life after being radicalised by two white supremacists.
Her mother was critical of Prevent, as well as the police and MI5 after she had referred her daughter to the deradicalisation programme and Rhianan was subsequently charged with terrorism offences.

Last month a coroner found some failings in the processes around protecting Rhianan, but none of them attributable to Rhianan taking her own life.
Det Supt Corrigan says a referral doesn’t mean individuals end up being arrested or on an MI5 watchlist.
She says: “You’re not reporting a crime, but you are seeking support. I would say the earlier you can come in and talk to us about the concerns you have the better. Prevent is just that – it is a pre-criminal space.
“It’s tragic when you see the number of young people being arrested for very serious charges. Just look at terrorism – one in five of all our arrests is a child under the age of 17. We need to think about how we respond to that.”
Prevent has been criticised for failures such as when Southport killer Axel Rudakabana failed to be recognised as needing intervention despite three referrals, or when MP David Amiss’ killer Ali Harbi Ali went through the programme and killed anyway.

Axel Rudakubana failed to be recognised as needing intervention despite three referrals. Pic: Merseyside police
It’s harder to quantify its successes.
Mr Ahad says he understands why the failures hit the headlines, but he believes the programme is saving lives.
He says: “I think the vast majority of people get radicalised online because they are sitting in their room reading all this content without any context or scholarly input. They see one version of events and they get so far down the rabbit hole they can’t pull themselves out.
“I really wish Prevent was around when I was a young, lost 15-year-old because there was nothing around then. It’s about listening to people engaging with them and offering them a way of getting out of that extremism.”

File pic: iStock
‘Radicalisation can happen in days to weeks’
Det Supt Corrigan says: “I’ve sat with parents whose children have gone on to commit the most horrendous crimes and they all spotted something.
“Now, with hindsight, they wished they had done something or acted early. That’s why we created this programme, because radicalisation can happen in days to weeks.”
Twenty years on from 7/7 the shape of the terrorist threat has shifted, the thoughts behind it harder to categorise, but it is no less dangerous.
Sports
Volpe toss hits Judge as sloppy Yanks fall again
Published
6 hours agoon
July 6, 2025By
admin
-
Jorge CastilloJul 5, 2025, 09:42 PM ET
Close- ESPN baseball reporter. Covered the Washington Wizards from 2014 to 2016 and the Washington Nationals from 2016 to 2018 for The Washington Post before covering the Los Angeles Dodgers and MLB for the Los Angeles Times from 2018 to 2024.
NEW YORK — A blunder that typifies the current state of the New York Yankees, who find themselves in the midst of their second six-game losing streak in three weeks, happened in front of 41,401 fans at Citi Field on Saturday, and almost nobody noticed.
The Yankees were jogging off the field after securing the third out of the fourth inning of their 12-6 loss to the Mets when shortstop Anthony Volpe, as is standard for teams across baseball at the end of innings, threw the ball to right fielder Aaron Judge as he crossed into the infield from right field.
Only Judge wasn’t looking, and the ball nailed him in the head, knocking his sunglasses off and leaving a small cut near his right eye. The wound required a bandage to stop the bleeding, but Judge stayed in the game.
“Confusion,” Yankees manager Aaron Boone said. “I didn’t know what happened initially. [It just] felt like something happened. Of course I was a little concerned.”
Avoiding an injury to the best player in baseball was on the Yankees’ very short list of positives in another sloppy, draining defeat to their crosstown rivals. With the loss, the Yankees, who held a three-game lead over the Toronto Blue Jays in the American League East standings entering June 30, find themselves tied with the Tampa Bay Rays for second place three games behind the Blue Jays heading into Sunday’s Subway Series finale.
The nosedive has been fueled by messy defense and a depleted pitching staff that has encountered a wall.
“It’s been a terrible week,” said Boone, who before the game announced starter Clarke Schmidt will likely undergo season-ending Tommy John surgery.
For the second straight day, the Mets capitalized on mistakes and cracked timely home runs. After slugging three homers in Friday’s series opener, the Mets hit three more Saturday — a grand slam in the first inning from Brandon Nimmo to take a 4-0 lead and two home runs from Pete Alonso to widen the gap.
Nimmo’s blast — his second grand slam in four days — came after Yankees left fielder Jasson Dominguez misplayed a ball hit by the Mets’ leadoff hitter in the first inning. On Friday, he misread Nimmo’s line drive and watched it sail over his head for a double. On Saturday, he was slow to react to Starling Marte’s flyball in the left-center field gap and braked without catching or stopping it, allowing Marte to advance to second for a double. Yankees starter Carlos Rodon then walked two batters to load the bases for Nimmo, who yanked a mistake, a 1-2 slider over the wall.
“That slider probably needs to be down,” said Rodon, who allowed seven runs (six earned) over five innings. “A lot of misses today and they punished them.”
Jazz Chisholm Jr.’s throwing woes at third base — a position the Yankees have asked him to play to accommodate DJ LeMahieu at second base — continued in the second inning when he fielded Tyrone Taylor’s groundball and sailed a toss over first baseman Cody Bellinger’s head. Taylor was given second base and scored moments later on Marte’s RBI single.
The Yankees were charged with their second error in the Mets’ four-run seventh inning when center fielder Trent Grisham charged Francisco Lindor’s single up the middle and had it bounce off the heel of his glove.
The mistake allowed a run to score from second base without a throw, extending the Mets lead back to three runs after the Yankees had chipped their deficit, and allowed a heads-up Lindor to advance to second base. Lindor later scored on Alonso’s second home run, a three-run blast off left-hander Jayvien Sandridge in the pitcher’s major league debut.
“Just got to play better,” Judge said. “That’s what it comes down to. It’s fundamentals. Making a routine play, routine. It’s just the little things. That’s what it kind of comes down to. But every good team goes through a couple bumps in the road.”
This six-game losing skid has looked very different from the Yankees’ first. That rough patch, consisting of losses to the Boston Red Sox and Los Angeles Angels, was propelled by offensive troubles. The Yankees scored six runs in the six games and gave up just 16. This time, run prevention is the issue; the Yankees have scored 34 runs and surrendered 54 in four games against the Blue Jays in Toronto and two in Queens.
“The offense is starting to swing the bat, put some runs on the board,” Boone said. “The pitching, which has kind of carried us a lot this season, has really, really struggled this week. We haven’t caught the ball as well as I think we should.
“So, look, when you live it and you’re going through it, it sucks, it hurts. But you got to be able to handle it. You got to be able to deal with it. You got to be able to weather it and come out of this and grow.”
Trending
-
Sports3 years ago
‘Storybook stuff’: Inside the night Bryce Harper sent the Phillies to the World Series
-
Sports1 year ago
Story injured on diving stop, exits Red Sox game
-
Sports2 years ago
Game 1 of WS least-watched in recorded history
-
Sports2 years ago
MLB Rank 2023: Ranking baseball’s top 100 players
-
Sports4 years ago
Team Europe easily wins 4th straight Laver Cup
-
Environment2 years ago
Japan and South Korea have a lot at stake in a free and open South China Sea
-
Sports2 years ago
Button battles heat exhaustion in NASCAR debut
-
Environment2 years ago
Game-changing Lectric XPedition launched as affordable electric cargo bike