Connect with us

Published

on

Electric grids do not change overnight. Power plants and other infrastructure are multi-decade investments, and it’s rare to retire them early. So, it’s a bit painful to watch how slowly they have been getting cleaned up. Even with the majority of new power plants being renewable energy power plants, the percentage of electricity coming from renewables only creeps up.

That can make 100% renewable energy or 100% clean electricity commitments seem car too far out, far too slow. A potential new requirement for utilities in the state of Oregon is one such example. If it gets through the state legislature, it will be one of the most aggressive timelines in the United States. However, it still gives the utilities nearly 20 years to fully decarbonize. Yes, 100% clean electricity by 2040 is ambitious when compared to other laws around the States. However, when looking at how much we need to cut emissions by 2040, that should be more of an average or norm than a leadership position. Nonetheless, in political context, it is something to celebrate.

Additionally, the bill as it is currently written requires that electric companies such as Portland General Electric and Pacific Power (the state’s two largest utilities) cut their carbon emissions 80% by 2030. An 80% reduction in emissions from a baseline level in just about a decade is a pretty aggressive transition for this sector. What is the baseline year, you ask? That’s actually not in the legislation. Not seeing it reported, I dug up the bill (Oregon House Bill 2021) and found this instead of a specific starting point: “Requires DEQ to determine each electric company’s baseline emissions level and, for each retail electricity provider, the amount of emissions reduction necessary to meet the established clean energy targets in the state policy.” Knowing how much these kind of things can be corrupted, I’m not thrilled to see a lack of clarity on this. However, I expect the state’s Department of Environmental Quality (DEQ) would be just about the best outfit to come up with the baseline. I hope.

Back to the state’s potential new requirement, reporting out of Oregon indicates that the legislation is likely to be passed this year. “Everyone OPB interviewed for this story suggested the bill is likely to pass this year, marking a significant milestone in Oregon’s energy policy — even if it’s one other states got to first.” It apparently has 100% opposition from Republicans in the state legislature, but Republicans don’t rule the show there. Its likelihood of passing is reportedly high despite a cap-&-trade bill dying last year as Republicans walked out of session early in order to kill it. This new bill is much narrower. Furthermore, it seems to have the support of the electric utility companies (which is something I find indicative of a not particularly aggressive legislative attempt, but I won’t get into all kinds of speculation or insinuation regarding that).

One line that rather annoyed me in the OPB reporting on the story is the following quote from Sunny Radcliffe, director of governmental affairs and energy policy at PGE, regarding getting to 100% clean electricity: “There is a lack of clarity for how we as an industry are going to get the last bits out,” Radcliffe said. “I don’t know anybody in our industry who knows how to get to zero with the technology we have today.”

I don’t know how Radcliffe doesn’t know anyone in the industry who can see how to get to 100% renewable electricity. After all, some places are already there (including places larger than Oregon), and there are these newfangled things called batteries that some people in the industry must have heard of. Also, by the way, a 2015 analysis out of Stanford showing how Oregon could get to 100% renewable electricity was referenced in the OPB article. In fact, I discovered the Oregon news because the lead author of that paper, Mark Z. Jacobson, tweeted out the story.

Anyway, let’s not harp on one quote from an industry player. Yes, we know how Oregon could get to 100% renewable electricity by 2040 — no worries.

There is plenty of good history and context on the Oregon bill over in that OPB article, so I recommend checking it out if you are curious to learn more. It’s one of the best pieces of local journalism I’ve seen on the topic of state renewable energy. The only major thing I’d change is that I’d point out what I just pointed out above. Though, the writer, Dirk VanderHart, did highlight the Stanford study in the article a bit before including that confusing quote from Radcliffe, so let’s just say that VanderHart slipped in the counterpoint preemptively and less offensively than I just did.

The article also points out key areas where the legislative shift from a cap-and-trade bill to this clean-electricity bill is evidence of somewhat deflated ambition. “Even if successful, the proposal only addresses a segment of the state’s carbon dioxide output.

“According to the DEQ, emissions from electricity accounted for 30% of the state’s greenhouse gas emissions in 2019. The entities regulated under HB 2021 are responsible for the vast majority of that, but some providers are left untouched.

“Several dozen small consumer-owned utilities around the state are not impacted by the bill. Nor is Idaho Power, the state’s smallest investor-owned utility, which was removed from HB 2021 after pressing for an exemption and touting its own decarbonization goals.”

I am certainly of the opinion that we need strong legislation to adequately deal with the climate catastrophe we are inviting upon ourselves. Though, in the case of stories like this, I am typically inspired to point out that we can each take individual action with or without such legislation. We can install record-cheap solar power on our roofs (well, some of us can) and we can switch to electric cars. In fact, the largest electric car seller in the country (by far) is also the second largest solar installer in the country and, seemingly, the one offering the cheapest solar, so you can quickly and easily go solar and go electric at the same time via a simple online store. So, whether Sunny Radcliffe knows how the whole state could run on renewables by 2040, Sunny could be driving on sunshine himself within a matter of months if he wanted to.

Related Stories:


Appreciate CleanTechnica’s originality? Consider becoming a CleanTechnica Member, Supporter, Technician, or Ambassador — or a patron on Patreon.


 



 


Have a tip for CleanTechnica, want to advertise, or want to suggest a guest for our CleanTech Talk podcast? Contact us here.

Continue Reading

Environment

RIZON class 4 and 5 electric MD trucks arrive in Canada

Published

on

By

RIZON class 4 and 5 electric MD trucks arrive in Canada

Daimler’s new, all-electric truck brand made its Canadian debut this week with the official market launch of its battery electric class 4 and 5 medium duty work trucks.

After making its North American debut at the 2023 ACT Expo in Anaheim, California, Daimler Truck’s RIZON brand has continued on a steady march towards production with initial preorders set to open this June. But it won’t just be Americans who can order a new RIZON electric box truck – Canadians will be able to add them to their fleets at the same time.

“Canada is very advanced regarding green energy and infrastructure and is a natural next step for RIZON’s second market,” explains Andreas Deuschle, the Global Head of RIZON. “We are very happy to bring our zero-emission solution to Canadian customers. They are proven OEM trucks with the latest technology from Daimler Truck.”

Modernism and mandates

RIZON electric truck interior; via Daimler Truck.

Along with California and a handful of other US states, the Canadian government has plans to limit (or outright ban) the use of diesel trucks on its roads. In the case of Canada, the nation has committed to a zero emissions goal by 2050 – but Daimler could have gotten there without launching a new brand.

So, why is Daimler launching a new brand?

RIZON is about reaching new customers with a chassis that’s been designed from the ground-up to be an EV. These customers might be new to Daimler, or looking to replace an aging fleet of Isuzu or (more likely) Mitsubishi Fuso cabovers with something a little more modern.

What they’ll find in a RIZON, then, is a smooth, quiet, and car-like ride that will make the “step up” from something like a Ford E-Transit easier than they might think.

Our own Jameson Dow got to drive a RIZON e18L model at an event hosted by Velocity Truck Centers at Irwindale Speedway last year, and came away impressed with the truck’s smooth acceleration and adjustable regenerative braking.

RIZON will offer four model variants for Canadian customers, the e16L, e16M, e18L, and the e18M, with a range of configurations and options ranging from 7.25 to 8.55 ton GVWRs.

Electrek’s Take

There’s definitely a place in the North American market for an agile, easy-to-drive medium duty truck like the RIZON, and Daimler’s nationwide network of Freightliner and Western Star dealers should give first time MD buyers a bit more peach of mind than they might get from a startup brand.

You can check out the specs on each of the RIZON electric models, below, then let us know what you think of these new cabover EVs in the comments.

Image courtsy Dailer Trucks.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

777 hp electric overland concept from Italdesign bows in Beijing [video]

Published

on

By

777 hp electric overland concept from Italdesign bows in Beijing [video]

The all-new, all-electric Italdesign Quintessenza concept is a high-tech Italian take on the Porsche Dakar concept that’s just begging to be put into production.

Making its debut at the Beijing Auto Show, the Italdesign Quintessenza concept embodies both the dynamic prowess of a GT and the versatile adaptability of a pick-up truck. At least, that’s what its makers say. And, if your idea of a pickup truck leans more towards “Subaru Brat” than “Ford F-150 Lightning,” that’s probably right!

The rear section of the Quintessenza converts from a “hatchback” to an open “pickup” bed in true Brat fashion. The rear seats are designed to flip 180-degrees backwards, providing a rear-facing, panoramic “stargazing” mode that promises, “(the) experience and feeling of connection with nature and the outside world.”

Stargazing mode

In its more conventional GT “mode,” the Quintessenza is arguably the best-looking Italdesign concept to come out in years, with vertical lighting elements up front and aggressively-sculpted rear haunches that this writer thinks would be a natural for Audi.

Those design elements aren’t just aesthetic – they’re loaded with electronics. “Two aerodynamic fins that integrate the ADAS systems are present on the upper back of the roof, at the level of the C-pillars,” reads the official release. “They map the surrounding environment when the satellite signal is poor, and offer multifunction lights indicating the car’s driving mode and braking when the hard top is removed.”

Quintessenza vertical elements

So, what kind of vehicle is the Italdesign Quintessenza? Is it a true overland GT, in the style of the Porsche Dakar or 911 SC/RS (the rally car that became the 959)? Is it a high-end spin on the classic Subaru Brat? A futuristic Ute for traversing the Australian outback? Or is it something else entirely?

That’s above our pay grades – but you, dear readers? You guys know what’s up, so check out the official Quintessenza launch video (below), then let us know what you think of Italdesign’s latest in the comments section at the bottom of the page.

Italdesign Quintessenza

DIMENSIONS

  • Length 5561 mm
  • Height 1580 mm
  • Width (front/rear) 2200 mm
  • Wheelbase 3240 mm
  • Front overhang 1003 mm
  • Rear overhang 1318 mm
  • Number of passengers 2+2
  • Body Lightweight Aluminum structure
  • Ground height Adjustable 200-280 mm

POWERTRAIN + PERFORMANCE

  • Battery 150kWh/800V
  • Power 580kW (approx. 777 hp)
  • Range 750 Km (approx. 465 miles)
  • 0-100 Km/h < 3 seconds
  • 1 Electric Drive Unit Front axle
  • 2 InWheel motor rear axles

SOURCE | IMAGES: Italdesign.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Environment

The new Momentum Cito E+ dares you to leave the car at home [Video]

Published

on

By

The new Momentum Cito E+ dares you to leave the car at home [Video]

All the cool suburbanites are already taking their kids to school, loading up at the farmers’ market, and making deliveries on clever and capable cargo e-bikes, but the new Momentum Cito E+ from Giant raises the cargo bike bar even higher — and makes leaving the car at home easier than ever.

Momentum is a new brand of “lifestyle” e-bikes from Giant Group designed to deliver premium features to customers while still hitting that $3,000-4,000 market “sweet spot.” Their latest bike, the all-new for 2024 Cito E+ utility bike, does just that, coming to market with a premium battery, Bluetooth technology, a suite of high-end safety features, and a $3,200 starting price.

Premium battery

Getting the most out of your e-bike often means getting the most out of your battery — and Momentum absolutely gets that. The Cito E+ ships with a 780 Watt-hour Panasonic battery pack with 22700 cells that have been optimized for e-bike use.

Compared to other ebike batteries with similar power ratings, the Momentum’s Panasonic battery promises to be lighter and more durable, with superior IPX7 weather protection, thermal regulation, and other safety features built-in (in fact, Panasonic was the first e-bike supplier to score a UL safety rating for its batteries).

The battery is easily removable for charging at home or in an office, but it can be charged while it’s in the bike, too. Either way, charging won’t take long — from 0 to 80% of charge (approx. 60 miles) of range is available in 3.5 hours, while a full (75 mile) charge takes less than 5 hours.

Connected cargo bike

As our test rider highlights in the video (above), the Momentum Cito E+ uses a proprietary battery management system, or BMS, to monitor the battery pack for maximum efficiency and reliability down to the individual cell level.

The BMS uses Bluetooth connectivity to transfer battery health data, state of charge, and other important information straight to the RideControl app, which enables the bike’s owner to get an in-depth look at the overall state of their e-bike and provides valuable diagnostic data to both the technicians tasked with servicing the bike and Giant themselves, to help develop even better e-bikes in the future.

2024 Giant Group dealership map; via ScrapeHero.

That connection to Giant Group is a huge potential benefit to Momentum Cito E+ buyers, by the way, as it gives them access to support from more than 1,200 brick and mortar Giant dealers across the US alone (above).

That’s a serious advantage that online-only bike brands simply can’t match.

Safety first … and maybe second, too

Momentum’s commitment to safety doesn’t stop at the battery. The Cito E+ features confidence-inspiring 4 piston hydraulic disc brakes and a heavy duty suspension for predictable handling even under heavy loads — important if you have to suddenly haul the bike down from its electronically assisted 28 mph top speed with precious kids and cargo on the back.

LED head and taillights with a lever-activated taillight ensure Cito E+ riders will be seen, too, helping you stay safer after hours.

Accessories and add-ons

Momentum Cito E+ top tube accessory and Momentum front basket shown; image by Electrek.

Momentum’s Cito E+ offers a comprehensive selection of accessories to help optimize it for each rider’s unique use case — whether that’s hauling up to 132 lbs. of cargo on the rear rack and 33 lbs. on the optional front basket (shown, above), or adding 2 Thule Yepp Maxi seats and getting the little ones to school five times a week.

You can find out more about the Momentum Cito E+ and the brand’s available accessories by clicking here.

FTC: We use income earning auto affiliate links. More.

Continue Reading

Trending